
BMS
narimonjonmurodov/PCB-design
A compact solar harvesting power supply designed to provide a stable 3.3V output from variable sunlight.

A compact solar harvesting power supply designed to provide a stable 3.3V output from variable sunlight.
Task1 is an open-source printed circuit board by narimonjonmurodov, from the narimonjonmurodov/PCB-design repository on GitHub. It is a 2-layer board of 64.2 × 52.6 mm with 12 parts on 9 nets, routed with 57 tracks and 0 vias.
Its parts include 4 resistors, 2 capacitors, 2 diodes and 1 switch.

This project contains the schematic and 3D PCB design of a two-transistor astable multivibrator created in KiCad. The circuit alternately blinks two LEDs using two BC237 NPN transistors, RC timing components, and a CR2032 battery.


A compact solar harvesting power supply designed to provide a stable 3.3V output from variable sunlight.
This project is a custom PCB designed in KiCad for low-power embedded applications. It efficiently harvests energy from solar sources and regulates it to a consistent 3.3V.
Narimonjon Murodov
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3, R4 |
| 2 | ~ | LED_THT:LED_D5.0mm | LED1, LED2 |
| 2 | ~ | Capacitor_THT:CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C1, C2 |
| 2 | ~ | Package_TO_SOT_THT:TO-92_Inline | T1, T2 |
| 1 | ~ | Battery:BatteryHolder_Bulgin_BX0036_1xC | BAT1 |
| 1 | ~ | Button_Switch_THT:SW_PUSH_6mm | S1 |

narimonjonmurodov/PCB-design
A compact solar harvesting power supply designed to provide a stable 3.3V output from variable sunlight.

narimonjonmurodov/PCB-design
A compact solar harvesting power supply designed to provide a stable 3.3V output from variable sunlight.

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 64.2 × 52.6 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the narimonjonmurodov/PCB-design repository on GitHub, at the commit this page was made from: the board is Task1/Task1.kicad_pcb and its schematic Task1/Task1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask narimonjonmurodov before reusing the design.