

Homebrew HW
Hardware designs for 8-bit homebrew computer
- Size
- 203.2 × 101.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 79
- Pads
- 499
- Tracks, vias
- 1,426, 93
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 10 Aug 2022
- Updated
- 4 Apr 2023
Overview
Homebrew HW is an open-source printed circuit board by nandgate, from the nandgate/Homebrew-HW repository on GitHub, published under the MIT licence. It is a 2-layer board of 203.2 × 101.6 mm with 53 parts on 79 nets, routed with 1,426 tracks and 93 vias.
It is built around the ATF16V8C-7PU, UMFT240XA-01 and TBA 2-1211. Its parts include 17 connectors, 14 resistors, 7 capacitors, 6 ICs and 3 transistors. It belongs with the retro computing and games boards and the FPGA and CPLD boards of this library.
Main components
3ATF16V8C-7PU
PDIP-205V EEPLD Supports UID protection PDIP-20 Programmable Logic Device (CPLDs/FPGAs) ROHSMicrochip TechnologyProgrammable Logic Device (CPLDs/FPGAs)UMFT240XA-01
-- USB Conversion Modules ROHSFTDIUSB Conversion ModulesTBA 2-1211
SIP-4-40℃~+90℃ 1 1.5kV 120mVp-p 12V 18mA 2W 30kHz~200kHz 400mA 470uF 5V 79% Short Circuit Protection 塑封型 非稳压型 SIP-4 Isolated Power Modules ROHSTRACO POWERIsolated Power Modules
README
readme.mdHardware files for the 8-bit homebrew project.
- Each folder contains the KiCad project for a processor/board.
- Under the PLD there is a folder with the WinCUPL projects for the PLD for each board.
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10.1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R14 |
| 4 | 0.1uF | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C3, C4, C6, C7 |
| 4 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3, J6, J9, J11 |
| 4 | Conn_02x16_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x16_P2.54mm_Vertical | J1, J4, J8, J10 |
| 3 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3 |
| 3 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2, C5 |
| 3 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J12, J16, J17 |
| 2 | Conn_01x09 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J13, J14 |
| 2 | Conn_02x21_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x21_P2.54mm_Vertical | J2, J5 |
| 2 | KM62256CLP | JDL_FootLibrary:DIP-28_W7.62mm_W15.64mm_LongPads | U2, U4 |
| 1 | 2.0K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11 |
| 1 | 2.1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12 |
| 1 | 3.3K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13 |
| 1 | ATF16V8C | Package_DIP:DIP-20_W7.62mm_Socket_LongPads | U1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J7 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | G65SC22P-2 | Package_DIP:DIP-40_W15.24mm_Socket_LongPads | U5 |
| 1 | LED_RGBK | JDL_FootLibrary:RGB_SMD_W7.8_H7.9 | D1 |
| 1 | LM555xN | Package_DIP:DIP-8_W7.62mm | U3 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | SW_SPST | Button_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW2 |
| 1 | TBA_2-1211 | TBA_2-1211:CONV_TBA_2-1211 | PS1 |
| 1 | UMFT240XA | Package_DIP:DIP-24_W7.62mm_Socket_LongPads | U6 |
The 51 most common of 53 parts.
More from nandgate/Homebrew-HW
3- 2 layers122.9 × 99.6 mm

- 2 layers122.9 × 99.6 mm

- 2 layers161.3 × 101.6 mm

Similar boards
- 2 layers42.7 × 48.8 mm

Kicad mitsubishi heavy cns ac controller v2
scattym/kicad-mitsubishi-heavy-cns-ac-controller
26 parts - 2 layers76.2 × 134.1 mm

Multiplier board
michaelkamprath/minimal-64x4-expansion-cards
A set of expansion boards for the Minimal 64x4 Home Computer
80 parts19 - 2 layers263.8 × 181.3 mm

Custom 8088 V5
LucaEstiva/Hobby_8088_PC
Studio e progetti di PC basato su processore Intel 8088 8Bit
23 parts - 2 layers213.5 × 79.1 mm

- 2 layers217.1 × 393.8 mm

Sweepv2
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
53 parts2.1k - 2 layers121.9 × 81.3 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
53 parts1kGPL-3.0 - 2 layers48 × 48 mm

- 2 layers103.7 × 74.1 mm

PicoGUS
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
53 parts805
Questions
How big is the Homebrew HW PCB?
It measures 203.2 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Homebrew HW use?
53 parts, built around the ATF16V8C-7PU, UMFT240XA-01 and TBA 2-1211. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Homebrew HW KiCad files?
From the nandgate/Homebrew-HW repository on GitHub, at the commit this page was made from: the board is mainBoard/mainBoard.kicad_pcb and its schematic CPU_TESTER/CPU_TESTER.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Homebrew HW design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).