
Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A dual-socket USB host PMOD module.
My usb host dual socket pmod is an open-source printed circuit board by nand2mario, from the nand2mario/usb_host_pmod repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 38.6 × 17.4 mm with 16 parts on 16 nets, routed with 117 tracks and 10 vias.
It is built around the QX2303L50T. Its parts include 8 resistors, 3 connectors, 2 capacitors, 1 IC and 1 diode.
Design sources for a dual-socket USB host PMOD module, intended for interfacing USB devices on FPGA boards using usb_hid_host.
Included are KiCAD sources and production files(Gerber/BOM/PNP).
The easiest way to obtain the module is by following the guide to directly order from JLCPCB.
This little design is done by @regymm0, @ico_TC and @nand2mario.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 15K | Resistor_SMD:R_0402_1005Metric | R5, R6, R7, R8 |
| 4 | 22 | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 1N5817/1N5819/1N5822 | Diode_SMD:Nexperia_DSN1608-2_1.6x0.8mm | D1 |
| 1 | Conn_01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Horizontal | J2 |
| 1 | QX2303L50T | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | USB_A_Stacked | Connector_USB:USB_A_Wuerth_61400826021_Horizontal_Stacked | J1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 38.6 × 17.4 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the QX2303L50T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nand2mario/usb_host_pmod repository on GitHub, at the commit this page was made from: the board is kicad/my_usb_host_dual_socket_pmod.kicad_pcb and its schematic kicad/my_usb_host_dual_socket_pmod.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).