
2022NHK Include
nalinally/robocon
ロボコンで使ったプログラムまとめておきます! 使ったマイコン ・Nucleo f303k8 ・Jetson Nano 2021NHKfinal と 2021NHK がありますが、たぶん最新版は 2021NHK です

ロボコンで使ったプログラムまとめておきます! 使ったマイコン ・Nucleo f303k8 ・Jetson Nano 2021NHKfinal と 2021NHK がありますが、たぶん最新版は 2021NHK です
2022NHK Switch is an open-source printed circuit board by nalinally, from the nalinally/robocon repository on GitHub. It is a 2-layer board with 7 parts on 6 nets, routed with 62 tracks and 0 vias.
Its parts include 2 resistors, 2 diodes, 2 switches and 1 connector.
ロボコンで使ったプログラムまとめておきます!
使ったマイコン
・Nucleo f303k8
・Jetson Nano
2021NHKfinal と 2021NHK がありますが、たぶん最新版は 2021NHK です
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | LED | LED_THT:LED_D3.0mm | D1, D2 |
| 2 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 2 | SW_DPDT_x2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW1, SW2 |
| 1 | Conn_01x04_Male | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |

nalinally/robocon
ロボコンで使ったプログラムまとめておきます! 使ったマイコン ・Nucleo f303k8 ・Jetson Nano 2021NHKfinal と 2021NHK がありますが、たぶん最新版は 2021NHK です

nalinally/robocon
ロボコンで使ったプログラムまとめておきます! 使ったマイコン ・Nucleo f303k8 ・Jetson Nano 2021NHKfinal と 2021NHK がありますが、たぶん最新版は 2021NHK です

nalinally/robocon
ロボコンで使ったプログラムまとめておきます! 使ったマイコン ・Nucleo f303k8 ・Jetson Nano 2021NHKfinal と 2021NHK がありますが、たぶん最新版は 2021NHK です

nalinally/robocon
ロボコンで使ったプログラムまとめておきます! 使ったマイコン ・Nucleo f303k8 ・Jetson Nano 2021NHKfinal と 2021NHK がありますが、たぶん最新版は 2021NHK です

nalinally/robocon
ロボコンで使ったプログラムまとめておきます! 使ったマイコン ・Nucleo f303k8 ・Jetson Nano 2021NHKfinal と 2021NHK がありますが、たぶん最新版は 2021NHK です

nalinally/robocon
ロボコンで使ったプログラムまとめておきます! 使ったマイコン ・Nucleo f303k8 ・Jetson Nano 2021NHKfinal と 2021NHK がありますが、たぶん最新版は 2021NHK です

nalinally/robocon
ロボコンで使ったプログラムまとめておきます! 使ったマイコン ・Nucleo f303k8 ・Jetson Nano 2021NHKfinal と 2021NHK がありますが、たぶん最新版は 2021NHK です

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nalinally/robocon repository on GitHub, at the commit this page was made from: the board is 2022NHK/circuits/controller/2022NHK_Switch/2022NHK_Switch.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nalinally before reusing the design.