2 layers158 × 11 mm
Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
22 parts1.1kGPL-3.0
2 layers180 × 85 mm
SnakeBoy
Nadoooor/SnakeBoyA snake-styled game boy clone.
- Size
- 180 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 57
- Pads
- 138
- Tracks, vias
- 258, 15
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 21 May 2026
- Updated
- 21 Aug 2026
Overview
SnakeBoy is an open-source printed circuit board by Nadoooor, from the Nadoooor/SnakeBoy repository on GitHub, published under the MIT licence. It is a 2-layer board of 180 × 85 mm with 22 parts on 57 nets, routed with 258 tracks and 15 vias.
Its parts include 7 resistors, 7 switches and 4 ICs. It belongs with the ESP32 boards of this library.
README
README.mdSnakeBoy
Description:
SnakeBoy is a custom snake-themed handheld gaming console powered by the ESP32. Featuring built-in Wi-Fi and Bluetooth connectivity, it supports multiplayer gaming, wireless ROM transfers, and retro emulation for a wide range of classic systems.
Why Iam making This?
I'm making this Device so i can play soo many games on a handheld device that i can take anywhere. And also as a teen from Gen z, i want to try the games my family was playing before my Gen. Like, Super mario, etc.. (dk any other games' names 👀)
Highlight:
The Device is fully snake-themed and it has a snake had on the top of the device that looks so cool, I just like snakes so much.
How it works:
- Charge the battery if it is not charged.
- Add all the games on the SD card and plug it from the inside.
- Switch on the device and wait for it to boot.
- Open your games and have fun yay.
Some photos of the project:
PCB:
3D PCB:
Schematic:
3D Case & Assembly:
[!NOTE] Here you are the Onshape Docs
The Project's Zine-Page:
.png)
Bill of Materials (BOM)
| Item Name | Purchase Link | Quantity | Price per Unit | Total |
|---|---|---|---|---|
| TFT LCD Display Module SPI Interface 1.8 Inch 128*160?(the biggest available and cheap) | Here | 1 | $5 | $5 |
| 12*12mm buttons would be great for the (X Y B A) | Here | 4 | $0.07 | $0.28 |
| 6*6 mm buttons would be enough for the (Start & Select) | Here | 2 | $0.02 | $0.04 |
| 2-Axis joystick for the motion would be super greaat!! (Will recycle it from an old Joystick) | Here | 2 (one pack) | $5 | $5 |
| MAX98357 I2S Sound module | Here | 1 | $2.42 | $2.42 |
| Speaker 8? 0.25W ( 29mm) | Here | 2 | $0.20 | $0.40 |
| 4000mAh 3.7V Lipo Battery | Here | 1 | $7.57 | $7.57 |
| BMS 1S TP4056 (5V -1A) ( Type C ) With Protection | Here | 1 | $0.30 | $0.30 |
| Slide Switch Right-Angle SPDT 3 Pin SK12D02VG7 | Here | 1 | $0.08 | $0.08 |
| PCB (From JLCPCB) | Here | 5 | $2.00 | $10 |
| PCB (From JLCPCB) SHIPPING | Here | 1 | $20 | $20 |
| 3D printing (Local Printing Service) | Here | 3 | ~~ | $60 |
| M3 screws (Lengths are in the Onshape Docs) | Here | 2 | $0.10 | $0.10 |
| S2B-XH-A-1 JST XH Data Terminal Angle Male 2 Pin Connector Header 2.5mm | Here | 3 | $0.02 | $0.06 |
| Female Pin-headers | Here | 10(one pack) | $4.70 | $4.70 |
| ESP32-S3-N16R8 Development Board WIFI and Bluetooth | Here | 1 | $13.13 | $13.13 |
| Resistor 10k ohm 1/4W | Here | 7 | $0.03 | $0.03 |
| Total | ~~ | ~~ | ~~ | $129.11 |
How to Build:
[!NOTE] You can find build guide for the Code here
- 3D print and get all the parts.
- Solder all the components in the PCB.
- Use the Female Pin-Headers for easy installation for the screen & ESP32 S3.
- Put the PCB into the case.
- Plug the speakers and the battery.
- Double face for the speakers would be enough.
- close the front Case with the screw.
- Plug the ESP32 S3 to your laptop and Upload the firmware.
- Close the back-cover.
- Switch on the device and ENJOYYY ❤️.
Made With ❤️, By Nadooor
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10Kohm | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R2, R3, R4, R5, R6, R7 |
| 1 | A | Button_Switch_THT:SW_PUSH-12mm | SW2 |
| 1 | B | Button_Switch_THT:SW_PUSH-12mm | SW4 |
| 1 | Battery | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | BT1 |
| 1 | ESP32-S3-DEVKITC-1-N16R8 | ESP32-S3-DEVKITC-1-N8R8:ESP32-S3-DEVKITC-1-N8R8 | U1 |
| 1 | Joystick | Joystick:XDCR_COM-09032 | U2 |
| 1 | Power_SW | Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW7 |
| 1 | Select | Button_Switch_THT:SW_PUSH_6mm | SW6 |
| 1 | Speaker_L | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | LS2 |
| 1 | Speaker_R | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | LS1 |
| 1 | Start | Button_Switch_THT:SW_PUSH_6mm | SW5 |
| 1 | TFT_320x240 | Display-extra:TFT-320x240 | U3 |
| 1 | TP4056 Module | TP4056 module:TP4056-18650 | U4 |
| 1 | X | Button_Switch_THT:SW_PUSH-12mm | SW1 |
| 1 | Y | Button_Switch_THT:SW_PUSH-12mm | SW3 |
| 1 | max98357 | Module-extra:max98357 | A2 |
Similar boards
- 2 layers57 × 65 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
22 parts1kGPL-3.0 - 2 layers81 × 57.2 mm
RP2040-Macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
22 parts915 - 2 layers54.6 × 70.9 mm
BeagleLogic Cape
abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.
22 parts479GPL-3.0 - 2 layers66.4 × 24.5 mm
Connecting piece
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
22 parts456 - 2 layers51 × 70 mm
- 2 layers19.7 × 19.7 mm
- 2 layers27.8 × 16 mm
Spi 1v8 level shifter
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
22 parts253GPL-3.0
Questions
How big is the SnakeBoy PCB?
It measures 180 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SnakeBoy use?
22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SnakeBoy KiCad files?
From the Nadoooor/SnakeBoy repository on GitHub, at the commit this page was made from: the board is PCB/SnakeBoy.kicad_pcb and its schematic PCB/SnakeBoy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SnakeBoy design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).