
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

Saras ckt is an open-source printed circuit board by nEXOSkyline, from the nEXOSkyline/FiberAnnealing repository on GitHub. It is a 2-layer board of 94 × 55 mm with 7 parts on 6 nets, routed with 24 tracks and 0 vias.
It is built around the BSR19A and XZM2MRTNI55W-8. Its parts include 3 resistors, 2 connectors, 1 IC and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R | Resistor_SMD:R_01005_0402Metric_Pad0.57x0.30mm_HandSolder | R1, R2, R3 |
| 2 | 796681-2 | special_TB:796681-2 | J1, J2 |
| 1 | BSR19A | special_transistor:BSR19A | U1 |
| 1 | XZM2MRTNI55W-8 | special_LED:XZM2MRTNI55W-8 | LED1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 94 × 55 mm and has 2 copper layers, 1.6 mm thick.
7 parts, built around the BSR19A and XZM2MRTNI55W-8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nEXOSkyline/FiberAnnealing repository on GitHub, at the commit this page was made from: the board is saras_ckt.kicad_pcb and its schematic OFA1schem.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nEXOSkyline before reusing the design.