Skip to the content
2 layers40.6 × 18 mmESP32 Wroom Programmer, the printed circuit board in 3D

ESP32 Wroom Programmer

n1-c00/ESP32_Wroom_Programmer

CH340-based Programmer for ESP32 based Designs

Size
40.6 × 18 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
28
Pads
79
Tracks, vias
134, 13
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
3 Jul 2025
Updated
4 Jul 2025

Overview

ESP32 Wroom Programmer is an open-source printed circuit board by n1-c00, from the n1-c00/ESP32_Wroom_Programmer repository on GitHub. It is a 2-layer board of 40.6 × 18 mm with 20 parts on 28 nets, routed with 134 tracks and 13 vias.

It is built around the CH340C and SS8050. Its parts include 8 resistors, 3 capacitors, 2 ICs, 2 diodes and 2 transistors. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.

Main components

2

README

README.md

ESP32_Wroom_Programmer

This neat little board solves the issue always having a USB-UART Converter on your board when building a design with an ESP32. Some of you now may say "But this is just a simple USB-UART Converter I can get that on Aliexpress for a few €". But the thing that makes this sweet little board special, is that it has the auto-programming circuit from the ESP-Devboards. so by only exposing 5-6 Pins you can programm your custom PCB the same way you would do it on a Devkit (Plus it has USB-C but thats kinda the standard by now).

I hope you find it as usefull as me, happy Building :)

Parts

20
QtyValueFootprintReferences
210kResistor_SMD:R_0805_2012MetricR1, R3
21kResistor_SMD:R_0805_2012MetricR2, R8
21uCapacitor_SMD:C_0805_2012MetricC1, C2
25k1Resistor_SMD:R_0603_1608MetricR4, R6
2LEDLED_SMD:LED_0805_2012MetricD1, D2
2RResistor_SMD:R_0805_2012MetricR5, R7
2SS8050Package_TO_SOT_SMD:SOT-23Q1, Q2
1100nCapacitor_SMD:C_0805_2012MetricC3
1CH340CPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU2
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_HorizontalJ2
1LOGOLOGOG***
1Torex Semicon XC6206P332MR-GPackage_TO_SOT_SMD:SOT-23U1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ1

Similar boards

  • 2 layers90.2 × 90 mmSra dev board 2026, the printed circuit board in 3D

    Sra dev board 2026

    SRA-VJTI/sra-board-hardware-design

    ESP32-based Development Board for Robotics and Embedded Applications

    219 parts81MIT
  • 2 layers76.6 × 141.1 mmOniondao badge, the printed circuit board in 3D

    Oniondao badge

    OnionDAO-git/oniondao-badge

    An open-source, hacker-conference-style electronic badge built around the ESP32-S3-WROOM-1-N8R8 (8 MB flash + 8 MB Octal PSRAM), with swappable RF / audio / storage modules, an e-paper (or TFT) display socket, a secure…

    190 parts17
  • 2 layers47.5 × 71.5 mmESP32 Wifi2CAN Rev0.1, the printed circuit board in 3D

    ESP32 Wifi2CAN Rev0.1

    ampnics/CAN-to-WiFi-Converter-Dongle-

    CAN to WiFi Converter PCB using ESP32! This step-by-step tutorial covers schematic creation, PCB layout, and best practices for signal integrity. Perfect for automotive and IoT applications!

    72 parts9
  • 2 layers52 × 29 mmEsp32 wroom mudule, the printed circuit board in 3D

    Esp32 wroom mudule

    moksh-pcb-design/ESP32-WROOM-Development-Board

    Custom ESP32-WROOM-32 Development Board designed in KiCad 10 featuring USB Type-C, CH340C USB-UART interface, AMS1117 power regulation and auto-programming circuitry.

    26 parts2
  • 2 layers66 × 99.7 mmAirMon, the printed circuit board in 3D

    AirMon

    SG-O/airMon

    ESP32 based air quality monitor PCB

    130 parts2CC-BY-4.0
  • 2 layers77.6 × 116.3 mmSolana badge, the printed circuit board in 3D

    Solana badge

    spacemandev-git/solana-defcon-badge-26

    2026 Solana Defcon Badge

    113 parts2
  • 2 layers52 × 29 mmEsp32 wroom, the printed circuit board in 3D

    Esp32 wroom

    7205jmj/Custom-ESP32-WROOM-32-Development-Board

    Most ESP32 development boards available in the market include additional features that may not be required for every project.

    26 parts1
  • 2 layers52.1 × 29 mmESP32, the printed circuit board in 3D

    ESP32

    darshudarshans1122/PCB-Design-Portfolio

    PCB design projects created using KiCad

    27 parts1

Questions

How big is the ESP32 Wroom Programmer PCB?

It measures 40.6 × 18 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP32 Wroom Programmer use?

20 parts, built around the CH340C and SS8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32 Wroom Programmer KiCad files?

From the n1-c00/ESP32_Wroom_Programmer repository on GitHub, at the commit this page was made from: the board is ESP32_Wroom_Programmer.kicad_pcb and its schematic ESP32_Wroom_Programmer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32 Wroom Programmer design in my own project?

Its repository states no licence, so its author keeps all rights: ask n1-c00 before reusing the design.