

LC RFE Mini RevA1
LibreCellular Mini RF Front-End Hardware Design
- Size
- 120 × 136 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 107
- Nets
- 96
- Pads
- 532
- Tracks, vias
- 442, 910
- Pours
- 102
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 May 2025
- Updated
- 3 Jun 2025
Overview
LC RFE Mini RevA1 is an open-source printed circuit board by myriadrf, from the myriadrf/lc-rfe-mini repository on GitHub. It is a 4-layer board of 120 × 136 mm with 107 parts on 96 nets, routed with 442 tracks and 910 vias.
It is built around the SN74LVC1G04DCK, SN74LVC1G32DCK and HC-RF-IPEX0303-01. Its parts include 36 capacitors, 23 connectors, 13 ICs, 12 resistors and 7 inductors.
Main components
3SN74LVC1G04DCK
SC-70-5-40℃~+125℃ 1 1 1.65V~5.5V 1.7V~2V 10uA 3.7ns@5V,50pF 32mA 32mA 700mV~800mV 74LVC 电源关断保护 SC-70-5 Inverters ROHSTexas InstrumentsInvertersSN74LVC1G32DCK
SC-70-5-40℃~+125℃ 1 1.65V~5.5V 1.7V~2V 10uA 2 3.8V 32mA 32mA 4ns@5V,50pF 550mV~650mV 700mV、800mV 74LVC Series OR Gate Overvoltage-tolerant input、Rear drive protection、Level shifting、Local shutdown mode、Live insertion protection SC-70-5 Logic Gates ROHSTexas InstrumentsLogic GatesHC-RF-IPEX0303-01
SMD1 1.25mm 2mm Board Side IPEX Inner pin SMD Coaxial Connectors (RF) ROHSHCTLCoaxial Connectors (RF)
README
README.rstLibreCellular RF Front-End Mini
.. image:: https://raw.githubusercontent.com/myriadrf/lc-rfe-mini/main/images/RFE_Mini_RevA1_PCB_1_1280w.jpg :alt: LibreCellular RFE Mini PCBA.
This repository contains the PCB (KiCAD) design for the single channel RF Front-End (RFE Mini).
For further details see the LibreCellular Documentation_.
Licence
LibreCelluar RF Front-End Mini is copyright 2025 Ordinatra Minima Ltd & AB Open Ltd, and provided under the Solderpad Hardware License v2.1.
.. _LibreCellular Documentation: https://librecellular.org/developer/hardware/rf/rfemini.html
Parts
107| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C3, C5, C6, C7, C702, C903, C904, C1102, C1105, C1302, C1305, C1501, C1502, C1503, C1504 +4 |
| 8 | 0 | LC_RFE:0201-SQUARE | R501, R502, R503, R504, R509, R510, R511, R512 |
| 6 | 4u7 | Capacitor_SMD:C_0402_1005Metric | C4, C9, C701, C902, C1101, C1301 |
| 6 | FB | Inductor_SMD:L_0402_1005Metric | L1, L2, L701, L901, L1101, L1301 |
| 6 | SMA | LC_RFE:Samtec_SMA-J-P-H-RA-TH1_W_CLEARANCE | CON1, CON2, CON501, CON502, CON505, CON506 |
| 5 | uFL | LC_RFE:Molex_734120110 | CON509, CON510, CON513, CON514, CON901 |
| 4 | MT | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 4 | SMA | LC_RFE:Samtec_SMA-J-P-H-RA-TH1 | CON3, CON4, CON5, CON6 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP901 |
| 3 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J5, J6, J7 |
| 2 | 100p | Capacitor_SMD:C_0402_1005Metric | C1103, C1303 |
| 2 | 1n | Capacitor_SMD:C_0402_1005Metric | C906, C907 |
| 2 | 22u | Capacitor_SMD:C_1206_3216Metric | C1, C8 |
| 2 | 27p | Capacitor_SMD:C_0402_1005Metric | C1104, C1304 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2, J3 |
| 2 | RF-LNA_TQL9063 | LC_RFE:SON50P200X200X90-9N | IC1101, IC1301 |
| 2 | RF-Switch-SPDT_SKY13286-359LF | LC_RFE:QFN65P400X400X100-17N-D | IC903, IC905 |
| 2 | RF-Switch_SKY13286-359LF | LC_RFE:QFN65P400X400X100-17N-D | IC1501, IC1502 |
| 2 | ~ | LC_RFE:Harwin_S03-15100300R+S0941-46R | MECH1101, MECH1301 |
| 1 | 1.5nH | Inductor_SMD:L_0402_1005Metric | L902 |
| 1 | 1.8p | Capacitor_SMD:C_0402_1005Metric | C908 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C909 |
| 1 | 30K9 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 390 | Resistor_SMD:R_0402_1005Metric | R901 |
| 1 | 68 0.1% | Resistor_SMD:R_0402_1005Metric | R902 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1501 |
| 1 | Power-LDO_NCP59800BMNADJTBG | LC_RFE:DFN-8(3x3) | IC1 |
| 1 | Power-VRef_ADR5040BKSZ-REEL7 | LC_RFE:SOT65P210X110-3N | IC902 |
| 1 | RF-Attenuator_F1956NBGI8 | LC_RFE:QFN50P500X500X80-33N-D | IC701 |
| 1 | RF-PwrDet_LTC5587IDD#TRPBF | LC_RFE:SON45P300X300X80-13N-D | IC901 |
| 1 | RF-Switch-SP3T_SKY13588-460LF | LC_RFE:QFN50P200X200X65-13N-D | IC904 |
| 1 | SN74LVC1G04DCK | Package_TO_SOT_SMD:SOT-353_SC-70-5 | IC1503 |
| 1 | SN74LVC1G32DCK | Package_TO_SOT_SMD:SOT-353_SC-70-5 | IC1504 |
| 1 | Val** | LC_RFE:LibreCellular_Logo | Ref** |
| 1 | ~ | rpi_pico:RPI_PICO_SHORTHEADERS | MOD1 |
The 103 most common of 107 parts.
More from myriadrf/lc-rfe-mini
1- 4 layers65 × 120 mm

Similar boards
- 4 layers99.8 × 119.8 mm

- 6 layers68.9 × 47.5 mm

Mowi
septentrio-gnss/mowi
Mowi is an Open Source hardware project that combines a compact Septentrio's GNSS receiver mosaic with a wireless ESP32 Wrover module
283 parts35 - 2 layers

T41-Main+RF board V012
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
255 parts66 - 4 layers100 × 100 mm

- 4 layers100 × 100 mm

- 2 layers100 × 100 mm

T41-exciter filter board
K0RGI/T41-K9HZ
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
263 parts1GPL-3.0 - 4 layers22.5 × 30 mm

- 4 layers72.7 × 50.2 mm

Adc32xx syzygy
loxodes/vna
Under development open hardware microwave vector network analyzer
107 parts205
Questions
How big is the LC RFE Mini RevA1 PCB?
It measures 120 × 136 mm and has 4 copper layers, 1.6 mm thick.
What parts does the LC RFE Mini RevA1 use?
107 parts, built around the SN74LVC1G04DCK, SN74LVC1G32DCK and HC-RF-IPEX0303-01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LC RFE Mini RevA1 KiCad files?
From the myriadrf/lc-rfe-mini repository on GitHub, at the commit this page was made from: the board is revisions/LC-RFE-Mini-RevA1/LC-RFE-Mini-RevA1.kicad_pcb and its schematic revisions/LC-RFE-Mini-RevA1/LC-RFE-Mini-RevA1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LC RFE Mini RevA1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask myriadrf before reusing the design.