Skip to the content
2 layers37.3 × 45.6 mmFloppyAdapter, the printed circuit board in 3D

FloppyAdapter

Myrcurial/o1next1

Next generation hardware for the classic Osborne 1 computer. Virtual peripherals via interposer, helpful shim devices, and hopefully a faithful to history but modern recreation of the machine itself.

Size
37.3 × 45.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
38
Nets
31
Pads
73
Tracks, vias
25, 29
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
9 Oct 2026
Updated
27 Oct 2026

Overview

FloppyAdapter is an open-source printed circuit board by Myrcurial, from the Myrcurial/o1next repository on GitHub, published under the MIT licence. It is a 2-layer board of 37.3 × 45.6 mm with 38 parts on 31 nets, routed with 25 tracks and 29 vias.

README

research/osborne1/floppy-adapter/README.md

Floppy Adapter for the Osborne 1

  1. The Osborne 1 uses a non-standard Shugart-like floppy interface where +12V and +5V for the drive are fed through the floppy cable. This KiCAD project accounts for that and creates a nice tidy interface to a GoTek floppy disk emulator. There is no need to modify the Osborne's floppy cable as is the case when using a generic floppy adapter.

  2. +5V power for the GoTek is taken from the floppy cable.

  3. Jumper only S1 on the GoTek.

  4. GoTek part number is: SFR1M44-U100K

  5. Connector on adapter to mate with GoTek is a Sullins PPPC172LJBN-RC

  6. Program the GoTek with FlashFloppy firmware: https://github.com/keirf/FlashFloppy

Adapter Pic1

Adapter Pic2

Adapter Pic3

References

Electrical Details:

3D printed 3.5" to 5.25" Floppy Case Adapter:

Richard Loxley has done a lot of good work on the Osborne 1. His site is a great resource for how to get CP/M-formatted floppy disk images working on the GoTek.

Just want the board?

Some people report that OSHPark may or may not cut the edge connector slot. So be prepared to dremmel out the slot yourself if they don't! Alternatively, it may be easier to remove the key from the floppy cable - just make sure you plug the cable into the adapter correctly or there will be smoke!

Parts

38
QtyValueFootprintReferences
13GNDwayne_footprints:EdgeFingerJ1, J2, J3, J4, J5, J6, J7, J9, J19, J27, J29, J31, J33
4+12Vwayne_footprints:EdgeFingerJ11, J13, J15, J17
3+5Vwayne_footprints:EdgeFingerJ21, J23, J25
14MHzwayne_footprints:EdgeFingerJ16
1Conn_01x03Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mmDRV_SEL
1Conn_02x01Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmPWR1
1DIRwayne_footprints:EdgeFingerJ18
1DS1wayne_footprints:EdgeFingerJ10
1DS2wayne_footprints:EdgeFingerJ12
1IDC 34 Pinwayne_footprints:PPPC172LJBN-RCFLOPPY
1INDEXwayne_footprints:EdgeFingerJ8
1LATEwayne_footprints:EdgeFingerJ34
1NCwayne_footprints:EdgeFingerJ14
1RDwayne_footprints:EdgeFingerJ30
1SSwayne_footprints:EdgeFingerJ32
1STEPwayne_footprints:EdgeFingerJ20
1TRK00wayne_footprints:EdgeFingerJ26
1WDwayne_footprints:EdgeFingerJ22
1WGwayne_footprints:EdgeFingerJ24
1WPwayne_footprints:EdgeFingerJ28

The 37 most common of 38 parts.

Similar boards

  • 2 layers85 × 115 mmOSO BOOK C1, the printed circuit board in 3D

    OSO BOOK C1

    joeycastillo/The-Open-Book

    For details on how to build, test and use Open Book, I've made documentation available here.

    38 parts8.1kCC-BY-SA-4.0
  • 2 layers38.1 × 12.7 mmVrs io 1, the printed circuit board in 3D

    Vrs io 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    38 parts1.2k
  • 2 layers136 × 84 mmMacropad, the printed circuit board in 3D

    Macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    38 parts915
  • 2 layers126.4 × 15.2 mmV5ProbeTop, the printed circuit board in 3D

    V5ProbeTop

    Architeuthis-Flux/JumperlessV5

    The next generation jumperless breadboard

    38 parts332
  • 2 layers66 × 25.4 mmArdmover Empfangsspule Yann, the printed circuit board in 3D

    Ardmover Empfangsspule Yann

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    38 parts282
  • 2 layers17.8 × 17.8 mmAltmode friend, the printed circuit board in 3D

    Altmode friend

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    38 parts253GPL-3.0
  • 2 layers51.4 × 61 mmWifi gb cart, the printed circuit board in 3D

    Wifi gb cart

    Staacks/wifi-game-boy-cartridge

    A WiFi cartridge for the original Game Boy.

    38 parts242
  • 2 layers125 × 97.2 mmBattoota, the printed circuit board in 3D

    Battoota

    AlaaSaadAbdo/battoota

    Keyboards

    38 parts188

Questions

How big is the FloppyAdapter PCB?

It measures 37.3 × 45.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the FloppyAdapter use?

38 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the FloppyAdapter KiCad files?

From the Myrcurial/o1next repository on GitHub, at the commit this page was made from: the board is research/osborne1/floppy-adapter/FloppyAdapter.kicad_pcb and its schematic hardware/floppy-adapter/floppy-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the FloppyAdapter design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).