

Stlink v1
Схемы и прошивка к прибору ST Link
- Size
- 56.2 × 27.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 54
- Pads
- 153
- Tracks, vias
- 402, 10
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 20 Sep 2017
- Updated
- 16 Dec 2019
Overview
Stlink v1 is an open-source printed circuit board by myowndevice, from the myowndevice/stlink repository on GitHub. It is a 2-layer board of 56.2 × 27.7 mm with 44 parts on 54 nets, routed with 402 tracks and 10 vias.
Its parts include 25 resistors, 11 capacitors, 2 ICs, 2 diodes and 2 connectors. It belongs with the STM32 boards of this library.
README
README.mdДанный репозитарий содержит информацию по прибору ST Link
Если вы будете скачивать файлы через web не забудьте скачать общую папку Kicadlib.
Подробная инструкция как самостоятельно сделать ST-link.
Если вы здесь в прервые посетите сайт myowndevice.ru, там вы найдете более подробную информацию!
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 22 | Resistors_SMD:R_0603_HandSoldering | R11, R12, R17, R18, R19, R20, R21, R22, R23, R24, R25 |
| 6 | 100n | Capacitors_SMD:C_0603_HandSoldering | C3, C7, C8, C9, C10, C11 |
| 4 | 100k | Resistors_SMD:R_0603_HandSoldering | R2, R6, R8, R9 |
| 3 | 10uf | Capacitors_SMD:C_0805_HandSoldering | C4, C5, C6 |
| 2 | 10k | Resistors_SMD:R_0603_HandSoldering | R3, R7 |
| 2 | 220 | Resistors_SMD:R_0603_HandSoldering | R4, R5 |
| 2 | 22pf | Capacitors_SMD:C_0603_HandSoldering | C1, C2 |
| 2 | 4k7 | Resistors_SMD:R_0603_HandSoldering | R13, R14 |
| 2 | 500 | Resistors_SMD:R_0603_HandSoldering | R15, R16 |
| 2 | LED | LEDs:LED_0603_HandSoldering | D1, D2 |
| 1 | 1k5 | Resistors_SMD:R_0603_HandSoldering | R10 |
| 1 | 680 | Resistors_SMD:R_0603_HandSoldering | R1 |
| 1 | 8mgh | Crystals:Crystal_HC49-4H_Vertical | Y1 |
| 1 | Jumper_NC_Small | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP1 |
| 1 | NCP603 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U1 |
| 1 | STM32F103C8Tx | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U2 |
| 1 | USB_A | Connect:USB_A | J1 |
| 1 | swim | Pin_Headers:Pin_Header_Angled_2x07_Pitch2.54mm | J2 |
More from myowndevice/stlink
1- 2 layers47.3 × 23.4 mm

Similar boards
- 2 layers78 × 60 mm

- 2 layers115 × 14.5 mm

- 2 layers37.7 × 20 mm

- 2 layers88.9 × 88.4 mm

- 2 layers125 × 98 mm

3-in-1
mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos
44 parts258 - 2 layers65 × 56.5 mm

RPiG3iMac
qbancoffee/imac_g3_ivad_board_init
iMac G3 IVAD board initialization with an arduino
44 parts240LGPL-3.0 - 2 layers54.4 × 49.3 mm

Fx3 tn20k adapter
Stefan-Olt/MISRC
MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.
44 parts236CC-BY-4.0 - 2 layers250 × 32 mm

Questions
How big is the Stlink v1 PCB?
It measures 56.2 × 27.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Stlink v1 use?
44 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stlink v1 KiCad files?
From the myowndevice/stlink repository on GitHub, at the commit this page was made from: the board is kicad/stlink_v1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stlink v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask myowndevice before reusing the design.