

R12-AW
MF40 is my-fi's mini 40% custom keyboard PCB family. The variants share the same general design direction, but differ by horizontal width, column configuration, and bottom-row style.
- Size
- 226.7 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 126
- Nets
- 92
- Pads
- 496
- Tracks, vias
- 726, 77
- Pours
- 247
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 15 Apr 2026
- Updated
- 18 Jun 2026
Overview
R12-AW is an open-source printed circuit board by my-fi-25073, from the my-fi-25073/MF40 repository on GitHub, published under the MIT licence. It is a 2-layer board of 226.7 × 75 mm with 126 parts on 92 nets, routed with 726 tracks and 77 vias.
It is built around the STM32F072CBT6, TPD4E05U06DQAR and XC6206P332MR, with the 1N4148WS, TS-1187A-B-A-B and SMF6.0A among its other parts. Its parts include 49 diodes, 9 capacitors, 6 resistors, 4 switches and 3 ICs. It belongs with the STM32 boards of this library.
Main components
6STM32F072CBT6
LQFP-48(7x7)-40℃~+85℃ 1.65V~3.6V 128KB 12bit 12bit 16KB 32 Bit 37 48MHz ARM Cortex-M0 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)TPD4E05U06DQAR
USON-10-40℃~+125℃ 0.5pF 10nA 14V 2.5A@8/20us 40W@8/20us 5.5V 6.5V ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional USON-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD Protection DevicesXC6206P332MR
SOT-23-3L-40℃~+85℃@(Ta) 1 240mV@(50mA) 3.3V 300mA 3uA 40dB@(1kHz) 8V Fixed Over Current Protection、Short Circuit Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHXY MOSFETVoltage Regulators - Linear, Low Drop Out (LDO) Regulators1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesTS-1187A-B-A-B
SMD-4P,5.1x5.1mm-30℃~+85℃ 1.5mm 1.6N 100,000 cycles 12V 5.1mm 5.1mm 50mA Gold No Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,5.1x5.1mm Tactile Switches ROHSXKB ConnectionTactile SwitchesSMF6.0A
SOD-123FLESD And Surge Protection (TVS/ESD)hongjiacheng
README
README.mdMF40 PCB Project
MF40 is my-fi's mini 40% custom keyboard PCB family. The variants share the same general design direction, but differ by horizontal width, column configuration, and bottom-row style.
This repository contains the hardware design files, QMK/VIA firmware source files, and sample plate drawing files for the MF40 PCBs.
Type
The type indicates the PCB width and layout configuration.
12/13: Indicates the horizontal PCB length in Cherry MX unit increments.A: Indicates a configuration where the horizontal width is fully filled with 1u columns.B: Indicates a configuration with one fewer column than theAconfiguration at the same horizontal width.W: Indicates support for a full WK-style bottom row.H: Indicates support for a 1.125u HHKB-style bottom row.
Variants
| Variant | Layout Configuration | Main Layout Options |
|---|---|---|
MF40-R12AW | 12u, 12-column, WK-style layout | 3-split spacebar, 4.5u, 5u, or 7u spacebar |
MF40-R13AH | 13u, 13-column, HHKB-style layout | Split or 2u Backspace, 6.25u or split spacebar |
MF40-R13AW | 13u, 13-column, WK-style layout | Split or 2u Backspace, 6u or split spacebar |
MF40-R13BW | 13u, 12-column, WK-style layout | ANSI/ISO/split/BAE Enter, left/right Shift options, 6u or split spacebar |
Repository Structure
KicadFiles/ KiCad schematic and PCB files
FirmwareFiles/ QMK/VIA firmware source folders
PlateFiles/ DXF plate drawing files
OtherFiles/ Other project filesFirmware
Each firmware folder under FirmwareFiles/ corresponds to one PCB variant. To compile the firmware, copy the relevant folder into QMK's keyboards/ directory.
The firmware supports VIA and custom LED control.
Hardware
Each PCB variant is managed as an independent KiCad project under KicadFiles/. If production outputs are available, they are placed in the production/ directory of each variant.
License
See LICENSE.
Parts
126| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | 1N4148WS | My-Fi Footprints:D_SOD-323_HandSoldering | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +28 |
| 37 | MX_SW_solder | My-Fi Footprints:SW_MX_1u | MX1, MX2, MX10, MX11, MX12, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX25, MX26 +21 |
| 11 | MX_SW_solder | My-Fi Footprints:SW_MX_1.25u | MX13, MX34, MX36, MX38, MX40, MX41, MX42, MX46, MX47, MX48, MX50 |
| 5 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C6 |
| 4 | 220 | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R5 |
| 4 | LED | My-Fi Footprints:DIP_LED_MX_3mm | LED1, LED2, LED3, LED4 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C8, C9 |
| 2 | MX_SW_solder | My-Fi Footprints:SW_MX_1.75u | MX23, MX24 |
| 2 | SW_DPST_x2 | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1, SW2 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 4.7nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | Conn_01x01_Pin | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | J1 |
| 1 | Conn_01x04_MountingPin | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | Conn_01x04_MountingPin | PCM_marbastlib-various:Molex_Pico-EZmate_78171-0004_1x04-1MP_P1.20mm_Vertical | J3 |
| 1 | MX_stab | My-Fi Footprints:STAB_MX_2.25u | S35 |
| 1 | MX_stab | My-Fi Footprints:STAB_MX_4.5u+5u+7u_tri | S44 |
| 1 | SMF6.0A | My-Fi Footprints:D_SOD-123 | D201 |
| 1 | STM32F072CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | TPD4E05U06DQAR | My-Fi Footprints:USON-10_2.5x1.0mm_P0.5mm | U1 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23-3 | U3 |
The 125 most common of 126 parts.
Similar boards
- 2 layers494.6 × 193.6 mm

- 2 layers293.8 × 104.8 mm

- 2 layers284.7 × 94.2 mm

Frogondola
my-fi-25073/frogondola
frog mini gondola layout keyboard pcb & firmware & plate.
151 parts2GPL-2.0 - 2 layers301.8 × 93.5 mm

- 2 layers294 × 84.3 mm

- 2 layers40 × 70 mm

KinetiCoreDC
axpaul/KinetiCoreDC
Compact STM32G0-based DC motor controller board featuring TI DRV8874 H-bridge drivers, RS485 communication, optoisolated I/O, and hardware power protection.
183 parts1CERN-OHL-S-2.0 - 4 layers100 × 100 mm

Av board cb
bryfur/tang-av-scaler
PS2-class component video -> deinterlace, SMAA, scale -> 1080p60 HDMI on a Sipeed Tang Console 138K, with its AV board
318 parts - 4 layers18 × 16.5 mm

UDB
Unified-Daughterboard/UDB-C-EZM
For more details on the Unified Daughterboard project, see the main website.
13 parts45MIT
Questions
How big is the R12-AW PCB?
It measures 226.7 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the R12-AW use?
126 parts, built around the STM32F072CBT6, TPD4E05U06DQAR, XC6206P332MR and 1N4148WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the R12-AW KiCad files?
From the my-fi-25073/MF40 repository on GitHub, at the commit this page was made from: the board is KicadFiles/R12-AW/R12-AW.kicad_pcb and its schematic KicadFiles/R12-AW/R12-AW.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the R12-AW design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).