

Rio icebreaker3x
3Axis LinuxCNC-RIO adapter-board - for the icebreaker v1.0e FPGA-Devboard - kicad project
- Size
- 78.7 × 51.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 67
- Pads
- 237
- Tracks, vias
- 365, 7
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Jul 2024
- Updated
- 16 Jul 2024
Overview
Rio icebreaker3x is an open-source printed circuit board by multigcs, from the multigcs/rio-icebreaker3x repository on GitHub. It is a 2-layer board of 78.7 × 51.9 mm with 60 parts on 67 nets, routed with 365 tracks and 7 vias.
It is built around the ULN2803A and BC817. Its parts include 18 resistors, 13 connectors, 6 ICs, 3 capacitors and 1 transistor. It belongs with the microcontroller boards boards of this library.
Main components
2README
README.mdrio-icebreaker3x
3 Axis LinuxCNC-RIO adapter-board - for the icebreaker v1.0e FPGA-Devboard - kicad project

works also on Colorlite_i5 (extboard v1.2)

software / gateware
https://github.com/multigcs/riocore
BOM
https://github.com/icebreaker-fpga/icebreaker
Forum
German: https://www.cnc-aus-holz.at/index.php?thread/3130-experimente-mit-linux-cnc-auf-raspi-und-ice40-fpga-als-mesa-alternative/&postID=40335#post40335 English: https://forum.linuxcnc.org/18-computer/49142-linuxcnc-rio-realtimeio-for-linuxcnc-based-on-fpga-ice40-ecp5
Videos
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11 |
| 9 | R | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4, R10, R11, R12, R13, R14 |
| 7 | 3k3 | Resistor_SMD:R_1206_3216Metric | R7, R8, R9, R15, R16, R17, R18 |
| 7 | Conn_01x03 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | input1, input2, input3, input4, input5, out1, out2 |
| 5 | PC817 | Package_DIP:DIP-4_W7.62mm | U2, U3, U4, U5, U6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | C_Polarized | Capacitor_SMD:CP_Elec_5x5.9 | C1, C2, C3 |
| 3 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | stepper1, stepper2, stepper4 |
| 3 | Pololu_Breakout_A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | A1, A2, A3 |
| 2 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Horizontal | J15, J16 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric | R5 |
| 1 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | +5v-1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | +24V-1 |
| 1 | ULN2803A | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U1 |
Similar boards
- 2 layers100 × 100 mm

- 2 layers87 × 47 mm

- 2 layers100 × 100 mm

Rio octobot
multigcs/rio-octobot
8Axis LinuxCNC-RIO main-board - for the iceWerx iCE40-HX8K FPGA-Devboard - kicad project
123 parts6 - 4 layers144.2 × 82.8 mm

SmartFuseBox
k3ldar/PowerControlHub
PowerControlHub is a flexible automation controller for 12V systems. It combines relay switching, sensor monitoring, and smart‑home connectivity (MQTT, Home Assistant, REST, BLE) into one device.
93 parts5GPL-3.0 - 2 layers100 × 100 mm

- 2 layers144.1 × 108.1 mm

- 2 layers100 × 100 mm

DC line module+Meter probe
kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.
100 parts3MIT - 2 layers

LM80C R6
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO
153 parts123GPL-3.0
Questions
How big is the Rio icebreaker3x PCB?
It measures 78.7 × 51.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rio icebreaker3x use?
60 parts, built around the ULN2803A and BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rio icebreaker3x KiCad files?
From the multigcs/rio-icebreaker3x repository on GitHub, at the commit this page was made from: the board is rio-icebreaker3x.kicad_pcb and its schematic driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rio icebreaker3x design in my own project?
Its repository states no licence, so its author keeps all rights: ask multigcs before reusing the design.
