

Esp32s3wroom devboard
Misc. PCB designs
- Size
- 29 × 46.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 49
- Pads
- 178
- Tracks, vias
- 276, 106
- Pours
- 106
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 13 Apr 2023
- Updated
- 11 Sep 2026
Overview
Esp32s3wroom devboard is an open-source printed circuit board by MTalon63, from the MTalon63/PCBs repository on GitHub. It is a 2-layer board of 29 × 46.7 mm with 27 parts on 49 nets, routed with 276 tracks and 106 vias.
It is built around the ESP32-S3-WROOM-1-N8, LDL1117S33R and USBLC6-2SC6, with the SS34 and WS2812B among its other parts. Its parts include 9 capacitors, 7 resistors, 3 ICs, 3 diodes and 3 connectors. It belongs with the microcontroller boards boards and the ESP32 boards of this library.
Main components
5ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLDL1117S33R
SOT-223-4-40℃~+125℃@(Tj) 1 1.2A 18V 3.3V 500uA 600mV@(1.2A) 60uVrms 87dB@(120Hz) Fixed Over Current Protection、Thermal Shutdown Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdPCBs
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4, C5, C6, C8 |
| 6 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R6 |
| 2 | GPIO | Connector_PinHeader_2.54mm:PinHeader_1x18_P2.54mm_Vertical | J2, J3 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 33 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 470n | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | BOOT | Buttons:KLS7TS6611 | SW1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | LDL1117S33R | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | RST | Buttons:KLS7TS6611 | SW2 |
| 1 | SS34 | Diode_SMD:D_SMA | D3 |
| 1 | USB C | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
More from MTalon63/PCBs
12- 2 layers86.4 × 92 mm

- 2 layers90.8 × 98 mm

- 2 layers86.4 × 58 mm

- 4 layers100 × 100 mm

- 2 layers50 × 50 mm

- 2 layers66.5 × 42 mm

- 6 layers50 × 50 mm

- 2 layers30 × 51 mm

- 2 layers

- 2 layers40.8 × 25 mm

- 2 layers

- 2 layers

Similar boards
- 4 layers100 × 129.8 mm

- 4 layers144 × 127 mm

Frothfet
hoeken/frothfet
Yarrboard load controller board with current sense, volt sense, fuses, and sender support.
394 parts14GPL-3.0 - 4 layers123.5 × 67.3 mm

Weather Station V2
TheMiz1os/WeatherStationV2
Second version of my DIY weather station project
68 parts - 2 layers208.6 × 278.7 mm

Diffprobe espnow
dudeku/esp-now-differential-probe
OR in Ethernet.h in line 261: virtual void begin(); -> virtual void begin(uint16t port=0);
501 parts - 2 layers68.2 × 52.2 mm

Forward Ignition PCB
aditgoyal5/Forward_Ignition_PCB
This repository is about a printed circuit board I built for Team Sammard.
135 parts - 4 layers93.6 × 51.7 mm

ESP32-S3-TBone
M7md0010/ESP32-S3-TBone
Custom T-bone form-factor ESP32-S3 development board for breadboard-friendly prototyping
59 parts - 4 layers92 × 56 mm

REIN R1
rein-baremetal/REIN_R1_KiCad
Dual-MCU baremetal embedded development board featuring high-speed QSPI storage, hardware USB hub, and flexible power management. Open for PCB trace routing collaboration
177 parts2 - 4 layers95 × 58 mm

Questions
How big is the Esp32s3wroom devboard PCB?
It measures 29 × 46.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32s3wroom devboard use?
27 parts, built around the ESP32-S3-WROOM-1-N8, LDL1117S33R, USBLC6-2SC6 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32s3wroom devboard KiCad files?
From the MTalon63/PCBs repository on GitHub, at the commit this page was made from: the board is esp32s3wroom-devboard/esp32s3wroom-devboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32s3wroom devboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask MTalon63 before reusing the design.