2 layers100 × 100 mm
Hydromisc
hydromisc/hydromisc
Open hardware to measure EC and pH, drive pumps, and otherwise manage a mid-size hydroponic grow over Wi-Fi.
179 parts526
2 layers
Fan controller
MTalon63/fan_controller- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 39
- Pads
- 77
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Feb 2025
- Updated
- 14 Feb 2025
Overview
Fan controller is an open-source printed circuit board by MTalon63, from the MTalon63/fan_controller repository on GitHub, published under the MIT licence. It is a 2-layer board with 7 parts on 39 nets.
It is built around the ESP32-WROOM-32E. Its parts include 4 capacitors, 1 resistor and 1 IC. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdfan_controller
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 1u | Capacitor_SMD:C_0201_0603Metric | C1 |
| 1 | 47u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32D | U1 |
| 1 | Fan_Tacho_PWM | Connector:FanPinHeader_1x04_P2.54mm_Vertical | M1 |
Questions
What parts does the Fan controller use?
7 parts, built around the ESP32-WROOM-32E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fan controller KiCad files?
From the MTalon63/fan_controller repository on GitHub, at the commit this page was made from: the board is fan_controller/fan_controller.kicad_pcb and its schematic fan_controller/fan_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fan controller design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers82.1 × 82.1 mm
Uncut Gem
QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer
207 parts210AGPL-3.0 - 4 layers51 × 48 mm
- 2 layers90.2 × 90 mm
Sra dev board 2026
SRA-VJTI/sra-board-hardware-design
ESP32-based Development Board for Robotics and Embedded Applications
219 parts81MIT - 4 layers62.5 × 60 mm
Unijoysticle2 c64
ricardoquesada/unijoysticle2
Bluetooth gamepad support for the Commodore 64 / Atari / Amiga, etc.
58 parts62 - 2 layers54.2 × 75.2 mm
KiCAD Design
Brobiwann/ESP-spider
The ESP-Spider is a quadruped robot inspired by the miniKame (https://github.com/JavierIH/miniKame) . Like the miniKame, it uses sinusoidal functions to control servo positions, but the design and code were developed…
70 parts44 - 4 layers65.9 × 52.9 mm
- 2 layers73 × 38.1 mm
KbxLEDController-16ch
kbx81/kbxLEDController-16ch
kbx's 16-channel ESP-32 Powered LED Strip Controller
79 parts10