
Omega DC DC adaptor 1.5
msx-solis/Omega_DC-DC_adaptor_1.5
adaptador de corriente para el OMEGA HOME COMPUTER

adaptador de corriente para el OMEGA HOME COMPUTER
Omega DC DC adaptor 1.6 is an open-source printed circuit board by msx-solis, from the msx-solis/Omega_DC-DC_adaptor_1.5 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 26.7 × 48.5 mm with 20 parts on 13 nets, routed with 161 tracks and 4 vias.
Its parts include 9 connectors, 6 fuses, 2 diodes, 1 resistor and 1 switch. It belongs with the power boards of this library.
Actualización de la entrada de corriente para el OMEGA HOME COMPUTER
Mejorada la distribución de fusibles para independizar el fusible de cada canal 5v, anteriormente el fusible de la placa base y la unidad de discos era común, ahora hay un fusible independiente para ambas vias.
También se ha añadido una doble hilera de pines (J7 y J10) para permitir la conexión a la placa base con más de un tipo de conector (uno que conecta recto y otro que desplaza la conexión 2.54mm).
Este circuito mejora la seguridad y comodidad para la interconexión del circuito mini fuente DC-DC +12v -12v a la placa base del OMEGA HOME COMPUTER. Permite la conexión de un interruptor de apagado, con una resistencia de descarga rapida, y también utilizar varios fusibles, uno por cada línea de tensión independiente.
Además incorpora varios enchufes independientes de alimnetación para conectar diversas ampliaciones internas en la carcasa, cada una unida a una conexión de fusible asociada.
La función que tienen el 1N4007 y el diodo zener es de protección, evitando daños en caso de una alimentación de polaridad inversa o de un voltaje algo superior.
Los valores de los fusibles rearmables son una sugerencia obtenida de las mediciones en mi equipo y con mis accesorios.
Hay varias versiones anteriores que no tenían fusibles ni conexión para interruptor.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1,5A | Capacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mm | F1, F2, F3, F6 |
| 2 | 100mA | Capacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mm | F4, F5 |
| 1 | 150 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 5.6V | Diode_THT:D_A-405_P7.62mm_Horizontal | D2 |
| 1 | 5V | My_Components:Conn_Power_Jack_Circular_Pads | J1 |
| 1 | 5v audio | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | 5v video | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | FMPAC PSU | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | LOGO | 100pin-QFP_DIP:Logo_MSXmakers_fsilk_29x14 | G*** |
| 1 | OMEGA POWER SUPPLY | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J7 |
| 1 | OMEGA PSU | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J10 |
| 1 | POWER | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J6 |
| 1 | POWER SWITCH | MSXMakers:SWITCH_SPDT | SW1 |
| 1 | V. Amp-Meter | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J8 |
| 1 | floppy | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J4 |

msx-solis/Omega_DC-DC_adaptor_1.5
adaptador de corriente para el OMEGA HOME COMPUTER



atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
It measures 26.7 × 48.5 mm and has 2 copper layers, 1.6 mm thick.
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the msx-solis/Omega_DC-DC_adaptor_1.5 repository on GitHub, at the commit this page was made from: the board is Omega_DC-DC_adaptor_1.6/Omega_DC-DC_adaptor_1.6.kicad_pcb and its schematic Omega_DC-DC_adaptor_1.6/Omega_DC-DC_adaptor_1.6.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).