2 layers231.1 × 106.7 mm
4 layers
Z80-computer
msfoley/z80-computer2Single board computer based on the Zilog Z80 processor
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 87
- Pads
- 213
- Tracks, vias
- 17, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Oct 2018
- Updated
- 10 Oct 2018
Overview
Z80-computer is an open-source printed circuit board by msfoley, from the msfoley/z80-computer repository on GitHub, published under the MIT licence. It is a 4-layer board with 25 parts on 87 nets, routed with 17 tracks and 0 vias.
It is built around the 74LS32SC and 74LS14PC. Its parts include 9 resistors, 8 ICs, 5 capacitors, 2 connectors and 1 crystal. It belongs with the retro computing and games and computers and single-board computers boards of this library.
Main components
2README
README.mdz80-computer
Single board computer based on the Zilog Z80 processor
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R5, R6, R7, R8 |
| 2 | 10u | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C4, C5 |
| 2 | 22p | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C3 |
| 2 | 74LS32 | Package_DIP:DIP-14_W7.62mm | U4, U6 |
| 1 | 100n | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R9 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R2 |
| 1 | 240 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R4 |
| 1 | 720 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R3 |
| 1 | 74138 | Package_DIP:DIP-16_W7.62mm | U8 |
| 1 | 74LS14 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | 74LS73 | Package_DIP:DIP-14_W7.62mm | U7 |
| 1 | Bus_ISA_8bit | Connector_PinHeader_2.54mm:PinHeader_2x31_P2.54mm_Vertical | J2 |
| 1 | Crystal | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | LM117_TO3 | Package_TO_SOT_THT:TO-3 | U3 |
| 1 | MCP130 | Package_TO_SOT_THT:TO-92 | U2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_RND:TerminalBlock_RND_205-00001_1x02_P5.00mm_Horizontal | J1 |
| 1 | Z80CPU | Package_DIP:DIP-40_W15.24mm | U5 |
Questions
What parts does the Z80-computer use?
25 parts, built around the 74LS32SC and 74LS14PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Z80-computer KiCad files?
From the msfoley/z80-computer repository on GitHub, at the commit this page was made from: the board is z80_computer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Z80-computer design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers170.2 × 100 mm
Z80-SBC
skiselev/zeta_sbc
Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware
75 parts53GPL-3.0 - 2 layers162.2 × 134.6 mm
- 2 layers279.4 × 203.2 mm
Z180GDC
lynchaj/rhyophyre
Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller
249 parts12 - 2 layers220 × 173.3 mm
SF-7017
fabiodl/sf7000
Most of the work was done by Andrea Ottaviani https://github.com/aotta
68 parts10GPL-3.0 - 2 layers190.5 × 77 mm
- 2 layers478 × 183 mm
- 2 layers99.7 × 149.9 mm
