
Evalboard1
mschuldt/ga144-breakout
Simple evaluation boards for the GA144 multi-computer chip

Simple evaluation boards for the GA144 multi-computer chip
Lcd addon is an open-source printed circuit board by mschuldt, from the mschuldt/ga144-breakout repository on GitHub. It is a 2-layer board of 45.5 × 27 mm with 8 parts on 12 nets, routed with 68 tracks and 3 vias.
Its parts include 6 connectors and 2 capacitors. It belongs with the lEDs and displays boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J6, J8 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J5 |
| 1 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | Conn_01x10 | Connector_FFC-FPC:Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J4 |

mschuldt/ga144-breakout
Simple evaluation boards for the GA144 multi-computer chip

mschuldt/ga144-breakout
Simple evaluation boards for the GA144 multi-computer chip


mschuldt/ga144-breakout
Simple evaluation boards for the GA144 multi-computer chip

mschuldt/ga144-breakout
Simple evaluation boards for the GA144 multi-computer chip

mschuldt/ga144-breakout
Simple evaluation boards for the GA144 multi-computer chip


joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
It measures 45.5 × 27 mm and has 2 copper layers, 1.6 mm thick.
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mschuldt/ga144-breakout repository on GitHub, at the commit this page was made from: the board is lcd-addon/lcd-addon.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mschuldt before reusing the design.