Skip to the content
2 layers88 × 84.5 mmKevin PCB, the printed circuit board in 3D

Kevin is an AI-powered animatronic fish built by modifying a Big Mouth Billy Bass. GillGPT brings together conversational AI, speech recognition, synthesized speech, a Raspberry Pi, FPGA motor control, and a custom…

Size
88 × 84.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
90
Pads
135
Tracks, vias
205, 3
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
2 Aug 2026
Updated
21 Sep 2026

Overview

Kevin PCB is an open-source printed circuit board by MrCosmic413, from the MrCosmic413/GillGPT repository on GitHub. It is a 2-layer board of 88 × 84.5 mm with 17 parts on 90 nets, routed with 205 tracks and 3 vias.

Its parts include 9 connectors, 4 capacitors and 1 fuse.

README

README.md

GillGPT — Meet Kevin 🐟

Kevin is an AI-powered animatronic fish built by modifying a Big Mouth Billy Bass. GillGPT brings together conversational AI, speech recognition, synthesized speech, a Raspberry Pi, FPGA motor control, and a custom KiCad PCB.

The project has grown from reverse-engineering two motors into an integrated hardware/software build: Kevin speaks, moves his mouth with the audio, and shows activity on an LCD.

How it works

text
Microphone → Raspberry Pi / KevinOS → PC speech recognition
                        ↓
                   Ollama response
                        ↓
                  Kokoro speech → Speaker
                        ↓
              Mouth animation + LCD feedback
                        ↓
       UART → Tang Nano 9K FPGA → TB6612FNG → Motors

The Raspberry Pi coordinates the interaction. The PC provides AI and speech services. The Tang Nano 9K handles timed motor sequences in Verilog, with the TB6612FNG driving the mouth and shared head/tail mechanism.

Build status — September 20, 2026

  • Original mechanism reverse engineered; motor direction and wiring documented.
  • Custom KiCad schematic, PCB layout, and module footprints added.
  • FPGA UART, PWM, mouth animation, head return, tail movement, and stop command implemented in source.
  • Voice, LCD feedback, and mouth movement reported working in the latest integration session.
  • Head/tail motor interference remains under investigation: disconnecting J3 restored clean audio in the latest test. The precise electrical cause and final fix still need verification.
  • Full completion video will be added after the remaining fixes and final demonstration.

Source coverage: the FPGA and hardware files are recovered from the local project. PC service source is included. The available Pi backup is dated August 19, 2026 and is preserved as an explicitly dated snapshot; it does not contain all September changes or the latest LCD integration. See source provenance and outstanding work.

Explore the project

AreaFiles
Editable schematic and PCBKiCad project, schematic, PCB
Custom module footprintsKevin.pretty
Manufacturing exportsSaved Gerber sets
Main FPGA controllerVerilog, pin constraints, Gowin project
Earlier FPGA bring-upMouth test, UART, LED blink
PC voice and integration servicesPC software
Historical Pi codeKevinOS — August 19 snapshot
Original motor investigationReverse-engineering notes

Hardware and firmware

Open hardware/kicad/Kevin_PCB.kicad_pro in KiCad. Keep Kevin.pretty and fp-lib-table alongside the project so its custom footprints resolve. Saved fabrication exports are historical sets; their correspondence to the current board has not been verified. Regenerate fabrication files from a checked board before ordering.

Open the main controller .gprj in Gowin for the Tang Nano 9K. Source defaults assume a 27 MHz clock, approximately 115200-baud UART, and 1 kHz PWM. Motor timing and duty-cycle constants are specific to this mechanism.

UART byteAction
q, n, N, e, EQuiet, normal short/long, and emphasis short/long mouth sequences
HHead out
hHead home
TTail sequence
SStop

Acknowledgements identify recognized commands; they do not prove physical movement completed. The early reverse-engineering notes use motor labels from the original investigation; the main FPGA source calls the mouth channel A and head/tail channel B.

Software

See PC service setup. The services cover Kokoro speech synthesis, faster-whisper transcription, and an optional Spotify/file-access bridge. Ollama supplies the language-model endpoint used by KevinOS.

The dated Pi snapshot is useful for understanding the earlier audio, AI, and motor architecture. It is not a complete reproduction of the present build. The current Pi source, dependency versions, and final demonstration remain to be synchronized.

Validation

For this repository update, Python sources were checked for syntax and the main Verilog controller was compiled with Icarus Verilog. These checks do not establish hardware operation, timing closure, electrical correctness, or completion of the remaining integration fixes.

Parts

17
QtyValueFootprintReferences
3MountingHole_2.7mm_M2.5MountingHole:MountingHole_2.7mm_M2.521, 22, 23
20.1uFCapacitor_SMD:C_0805_2012MetricC1, C2
1100uFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC3
1470uFCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC4
15AFuse:Fuse_Bourns_MF-RG300F1
1HEAD_TAIL_MOTORTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ3
1LCD InterfaceConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ17
1MOTOR_DRIVER_TB6612Kevin:TB6612_Module_2x8_15mmJ6
1MOUTH_MOTORTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ2
1Main BatteryTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ14
1Pi Power OutputTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ15
1RASBERRY_PIConnector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalJ1
1Tang Power OutputTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ16
1Tang_Nano_9kKevin:Tang_Nano_9K_ModuleJ5

Similar boards

  • 2 layers50 × 35 mmServo power, the printed circuit board in 3D

    Servo power

    earthtojake/text-to-cad

    Design physical products with AI

    17 parts26kMIT
  • 2 layers139.7 × 62.2 mmBreakout 60pin EEC IV, the printed circuit board in 3D

    Breakout 60pin EEC IV

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    17 parts1.2k
  • 2 layers29.2 × 55.9 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    17 parts1kGPL-3.0
  • 2 layers24.5 × 36.5 mmCluster, the printed circuit board in 3D

    Cluster

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    17 parts993
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 2 layers38.9 × 16.1 mmAmoeba spc, the printed circuit board in 3D

    Amoeba spc

    mtl/keyboard-pcbs

    Keyboard PCBs

    17 parts485
  • 2 layers36 × 51 mmABSIS ALE, the printed circuit board in 3D

    ABSIS ALE

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    17 parts431

Questions

How big is the Kevin PCB PCB?

It measures 88 × 84.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Kevin PCB use?

17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Kevin PCB KiCad files?

From the MrCosmic413/GillGPT repository on GitHub, at the commit this page was made from: the board is hardware/kicad/Kevin_PCB.kicad_pcb and its schematic hardware/kicad/Kevin_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Kevin PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask MrCosmic413 before reusing the design.