

Carrier
A portable ADS-B / FLARM receiver
- Size
- 105 × 95 mm
- Copper layers
- 4
- Thickness
- 1.59 mm
- Parts
- 143
- Nets
- 113
- Pads
- 458
- Tracks, vias
- 810, 176
- Pours
- 34
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 Sep 2026
- Updated
- 31 Oct 2026
Overview
Carrier is an open-source printed circuit board by mp911de, from the mp911de/airgrep repository on GitHub. It is a 4-layer board of 105 × 95 mm with 143 parts on 113 nets, routed with 810 tracks and 176 vias.
It is built around the BMP581, TPS61088RHLR and MAX17048G+T10, with the MAX77757JEFG420+T, SN74LVC1G17DBVR and AO3401A among its other parts. Its parts include 39 resistors, 36 capacitors, 12 connectors, 10 ICs and 7 diodes.
Main components
11BMP581
LGA-10(2x2)-40℃~+85℃ 0.5pa/K 1.71V~3.6V 1uA 30Kpa~1.25bar 6pa I2C、SPI、I3C LGA-10(2x2) Pressure Sensors ROHSBosch SensortecPressure SensorsTPS61088RHLR
VQFN-20-EP(3.6x4.6)-40℃~+85℃@(TA) 1 10A 1uA 2.2MHz 2.7V~12V 4.5V~12.6V Adjustable Boost Boost Built-in Yes VQFN-20-EP(3.6x4.6) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersMAX17048G+T10
DFN-8-EP(2x2)-40℃~+85℃ 1 2.5V~4.5V 3uA I2C Lithium Battery Not supported Not supported DFN-8-EP(2x2) Battery Management ROHSMaxim Integrated (Analog Devices)Battery ManagementMAX77757JEFG420+T
FC2QFN-24(3x3)-40℃~+85℃ 1 3.15A 30uA 4.2V 4.5V~13.7V Charging IC Constant current charging、Constant voltage charging、Trickle charging、Automatic recharge、Charge termination、Programmable charging current、Soft-start、Overcurrent Protection、Short-Circuit Protection、Overvoltage protection Lithium Battery、LiFePO4 Battery Support FC2QFN-24(3x3) Battery Management ROHSMaxim Integrated (Analog Devices)Battery ManagementSN74LVC1G17DBVR
SOT-23-5-40℃~+125℃ 1 1 1.2V、1.9V、2.3V、2.4V 1.65V~5.5V 100mV、300mV、400mV、550mV 10uA 32mA 32mA 74LVC 8.3ns@5V,50pF SOT-23-5 Logic Gates ROHSTECH PUBLICLogic GatesAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsH5VLD3B
SOD-323-55℃~+125℃ 12V 15pF 50nA 5V 6V 8A@8/20us 95W@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 Single-channel SOD-323 ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)K3-1280S-F1
SMD-25℃~+80℃ 10000 times 3.5mm 3.7mm 300mA 6V 9.1mm Black Gull Wing Rectangular Columnar SPDT Surface Mount, Right Angle SMD,9.1x3.7mm Slide Switches ROHSHRO ElectronicsSlide SwitchesMC-107DMS
SMDUSB ConnectorsHanbo ElectronicPKMCS0909E4000-R1
SMD,9x9mm-40℃~+85℃ 1.9mm 12.5V 4kHz 65dB 9mm 9mm Passive (Externally Driven) Piezoelectric SMD,9x9mm Buzzers ROHSMurataBuzzersSMAJ12A
DO-214AC(SMA)-55℃~+150℃ 12V 13.3V 19.9V 20.1A 400W 5uA TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHSGOODWORKESD And Surge Protection (TVS/ESD)
README
README.mdairgrep
A portable ADS-B / FLARM receiver. Started as carrier board for a removable ESP32-S3 touch display and ADSBee 1090U receiver, with a soldered MAX-M10S GNSS receiver. It adds a single-cell Li-ion charger, a 5 V boost rail, a fuel gauge, a barometer and a buzzer.
Current state
- Schematic (7 sheets) and board (105 x 95 mm, 4 layers, all SMD parts on top) are implemented. The active TI PCB and schematics define the hardware;
tools/check.shreports the ERC, DRC and parity state. - Order status and open work are in docs/open-issues.md.
Where things are
| Path | Content |
|---|---|
| docs/requirements.md | What the device must do. Read first. |
| docs/checklist-draft.md | Draft hardware review checks, investigation guidance and trial evaluation |
| docs/specs.md | Technical data: radio, charging, battery, power budget, runtimes and validation limits |
| docs/decisions.md | Reasons behind the design decisions |
| docs/mechanical.md | Board outline, mounting holes, module placement, battery, antennas, enclosure |
| docs/interfaces.md | Pin maps of the modules and the carrier connectors |
| docs/i2c-bus-requirements.md | I2C speed, bandwidth, capacitance and pull-up limits |
| docs/firmware.md | What the display firmware must do: operating modes, charger host control, charger-mode display, sleep |
| docs/bom-hand-sourced.md | Parts to buy and fit by hand, with order links and order status |
| docs/open-issues.md | Open work only |
| issues/ | Local issue tracker, one markdown file per issue |
specs/power_params.json, tools/power_budget.py | Power model inputs and the script that generates the power, runtime and charging tables in docs/specs.md |
hardware/carrier-ti-charger/ | Active KiCad 10 project carrier.kicad_pro, BQ25798 charger. lib/ holds symbols, footprints and 3D models, carrier-schematic.pdf is the schematic print, jlcpcb/ holds the production exports. |
hardware/carrier-max-charger/ | Frozen MAX77757 reference, no further development. Legacy tools and results remain available with --project NAME. |
hardware/insulator/ | KiCad project of the insulator board between carrier and battery, generated by tools/make_insulator.py |
hardware/sim/ | Verification by simulation, see hardware/sim/README.md: charge cut-off (run_thermal.py), converters and undervoltage latch (run_power.py), board heat (run_heat.py), emissions and receiver desense (run_emi.py), enclosure vents (vent_model.py). Active results use the ti suffix or heat/ti/; MAX results are historical. |
mechanical/ | Placement drawing (placement.png, placement.svg, generator draw_placement.py) and extracted module geometry (JSON) |
datasheets/ | Data sheets of the parts in use, see datasheets/README.md |
sources/ | Manufacturer CAD: display KiCad project (display.zip), GNSS and gauge Eagle files, ADSBee reference image and schematic text |
tools/ | Scripts: design check (check.sh), board queries (board.py), net-coloured copper maps (netmap.py), power budget, CPL correction for JLCPCB (fix_cpl.py), insulator generator |
Tools
- KiCad 10.0.6, including
kicad-cliand its bundled Python for the scripts that usepcbnew.tools/kpyruns that Python. - Python 3.14; the simulation packages are listed in
hardware/sim/requirements.txt - ngspice 47 (Homebrew) for
hardware/sim/ python3 tools/report-holes-vias.py path/to/board.kicad_pcbreports via copper/drill sizes, minimum nominal annular rings, plated and non-plated footprint drills, slots, counts and nets in mil. Edge.Cuts cutouts are excluded.python3 tools/report-traces.py path/to/board.kicad_pcbreports straight and arc track widths by layer, with counts and nets in mil. Both reports are read-only, sorted by size, and automatically usetools/kpywhen needed.
Parts
143| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100k | Resistor_SMD:R_0603_1608Metric | R12, R13, R27, R36, R41, R48, R49, R50, R51, R52, R53, R54, R55 |
| 12 | 100n | Capacitor_SMD:C_0603_1608Metric | C8, C12, C16, C27, C28, C29, C30, C31, C37, C38, C39, C40 |
| 9 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MH1, MH2, MH3, MH4, MH10, MH11, MH12, MH13, MH14 |
| 7 | 22u 10V X7R | Capacitor_SMD:C_0805_2012Metric | C9, C10, C13, C14, C18, C19, C20 |
| 6 | 1M | Resistor_SMD:R_0603_1608Metric | R10, R42, R44, R45, R46, R47 |
| 5 | 10u 25V X7R | Capacitor_SMD:C_0805_2012Metric | C6, C11, C24, C25, C26 |
| 4 | 2.2u 25V X7R | Capacitor_SMD:C_0603_1608Metric | C5, C7, C15, C34 |
| 4 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4, Q7 |
| 4 | H5VLD3B ESD 5V | Diode_SMD:D_SOD-323 | D6, D7, D8, D9 |
| 3 | 10n | Capacitor_SMD:C_0603_1608Metric | C21, C23, C35 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R29, R30, R43 |
| 3 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q6, Q8, Q9 |
| 3 | Fiducial | carrier:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 3 | K3-1280S-F1 | carrier:SW-SMD_K3-1280S-F1 | SW1, SW2, SW3 |
| 3 | MountingHole_6.5mm | MountingHole:MountingHole_6.5mm | MH6, MH7, MH8 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R19, R20 |
| 2 | 560R | Resistor_SMD:R_0603_1608Metric | R23, R31 |
| 2 | 6.2k 1% | Resistor_SMD:R_0603_1608Metric | R6, R37 |
| 2 | LM73100RPWR | carrier:VQFN-10_L2.0-W2.0-P0.45-HR_LM73100 | U11, U12 |
| 1 | 100p | Capacitor_SMD:C_0603_1608Metric | C22 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R40 |
| 1 | 150R | Resistor_SMD:R_0603_1608Metric | R28 |
| 1 | 154k 1% | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 160k | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 1n DNP snubber | Capacitor_SMD:C_0603_1608Metric | C36 |
| 1 | 1uH FXL0630-1R0-M | carrier:IND-SMD_L7.0-W6.6_FXL0630 | L1 |
| 1 | 2.2R DNP snubber | Resistor_SMD:R_0603_1608Metric | R39 |
| 1 | 2.2uH CKST0603 | carrier:IND-SMD_L7.4-W6.6 | L2 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 22u 16V X7R | Capacitor_SMD:C_1206_3216Metric | C33 |
| 1 | 240k 1% | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 4.7u 50V X7R | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R33 |
| 1 | 47n | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 5A 0466005.NRHF | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 6.8k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 75k 1% | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | BLM31KN471SZ1L | Inductor_SMD:L_1206_3216Metric | FB1 |
| 1 | BMP581 | carrier:LGA-10_L2.0-W2.0-P0.50-TL_BMP581 | U10 |
| 1 | CONTROLS | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J12 |
| 1 | GND | carrier:TestPoint_Pad_D1.5mm | TP6 |
| 1 | JP_PWR_ADS | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | JP_PWR_ESP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | J_ADS_GNSS ADSBee J4 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J11 |
| 1 | J_ADS_MAIN ADSBee J5 | Connector_PinSocket_2.54mm:PinSocket_1x13_P2.54mm_Vertical | J10 |
| 1 | J_BAT JST-PH 2mm | carrier:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical_R10 | J3 |
| 1 | J_ESP_A support | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J6 |
| 1 | J_ESP_B power/UART | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J7 |
| 1 | J_ESP_C I2C | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J8 |
| 1 | J_ESP_D support | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J9 |
| 1 | J_GNSS GPS-18037 J5 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | J_NTC 100k ENTC-EB-100K4262-02 | carrier:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical_R10 | J2 |
| 1 | J_THERM 60C NC | carrier:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical_R10 | J4 |
| 1 | L-115WEGW red/green CC | LED_THT:LED_D3.0mm-3 | D4 |
| 1 | LED 3mm green | carrier:LED_D3.0mm | D5 |
| 1 | MAX17048G+T10 | carrier:TDFN-8_L2.0-W2.0-P0.50-EP0.8x1.38_T822 | U8 |
| 1 | MAX77757JEFG420+T | carrier:FC2QFN-24_L3.0-W3.0-P0.40_MAX77757 | U4 |
| 1 | MC-107DMS | carrier:USB_C_Receptacle_Hanbo_MC-107DMS | J1 |
| 1 | PKMCS0909E4000-R1 | carrier:BUZ-SMD_L9.0-W9.0_PKMCS0909E4000-R1 | BZ1 |
| 1 | PWR_EN | carrier:TestPoint_Pad_D1.5mm | TP3 |
| 1 | RAIL_5V | carrier:TestPoint_Pad_D1.5mm | TP7 |
| 1 | SMAJ12A | Diode_SMD:D_SMA | D3 |
| 1 | SN74LVC1G17DBVR | Package_TO_SOT_SMD:SOT-23-5 | U9 |
| 1 | TCA9534PWR | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U13 |
| 1 | THERM_OK | carrier:TestPoint_Pad_D1.5mm | TP4 |
| 1 | TLV840CADL29DBVR 2.9V | carrier:SOT-23-5_L2.9-W1.6-P0.95-LS2.8-BR | U5 |
| 1 | TPS22975DSGR | carrier:Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U7 |
| 1 | TPS61088RHLR | carrier:VQFN-20_L4.6-W3.6-P0.50-BL | U6 |
| 1 | USB_VBUS | carrier:TestPoint_Pad_D1.5mm | TP5 |
| 1 | VBAT | carrier:TestPoint_Pad_D1.5mm | TP1 |
| 1 | VSYS | carrier:TestPoint_Pad_D1.5mm | TP2 |
More from mp911de/airgrep
1- 4 layers105 × 95 mm

Similar boards
- 2 layers96 × 74.4 mm

Monolith
luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.
138 parts45 - 4 layers45.5 × 66.7 mm

Sunshine pcb rounded
Nv7-GitHub/sunshine
The source code and PCB design for my melty brain combat robot, Sunshine!
54 parts1 - 2 layers42.5 × 21.8 mm

AirDAP
guolic1/AirDAP
基于 ESP32-S3 的无线调试器,支持 CMSIS-DAP 调试烧录和串口通信。 通过 USB 直连,或使用 Windows / Linux 主机服务将网络设备映射为 USB 调试器和串口。
79 partsMIT - 4 layers120.9 × 75.2 mm

Arctiq Mainboard
JHPate1/Arctiq-GPS
A Mainboard PCB design for my custom handheld navigation device.
91 parts1 - 4 layers65 × 32 mm

OrangePi Zero3W UPS RevA before routing
ripaaf/ups-orangepizero3w
trying making a pcb ups for orangepi (its bad)
74 partsMIT - 4 layers36 × 39 mm

- 4 layers66 × 142 mm

- 2 layers80 × 50 mm

Thermal Camera
Circuit-Digest/MLX90640-Thermal-Camera
An Open Source Thermal Imaging IR camera that you can build yourserlf
66 parts94
Questions
How big is the Carrier PCB?
It measures 105 × 95 mm and has 4 copper layers, 1.59 mm thick.
What parts does the Carrier use?
143 parts, built around the BMP581, TPS61088RHLR, MAX17048G+T10 and MAX77757JEFG420+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Carrier KiCad files?
From the mp911de/airgrep repository on GitHub, at the commit this page was made from: the board is hardware/carrier-max-charger/carrier.kicad_pcb and its schematic hardware/carrier-max-charger/battery_control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Carrier design in my own project?
Its repository states no licence, so its author keeps all rights: ask mp911de before reusing the design.