Skip to the content
2 layers60 × 50 mmHackClubHackPad, the printed circuit board in 3D
Size
60 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
14
Pads
47
Tracks, vias
92, 0
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
3 Oct 2024
Updated
13 Oct 2024

Overview

HackClubHackPad is an open-source printed circuit board by mouseylicense, from the mouseylicense/HackClubMouseyPad repository on GitHub. It is a 2-layer board of 60 × 50 mm with 7 parts on 14 nets, routed with 92 tracks and 0 vias.

Its parts include 5 switches, 1 IC and 1 connector. It belongs with the SAM D and SAM boards of this library.

README

readme.md

BOM:

  • 3x Gateron Milky Yellows
  • 2x EC11 Encoder
  • 1x PCB
  • 1x I2C SSD1306 0.91" 128x32 OLED
  • 4x 18mm M3 Screws

Colors:

  • Bottom Part in acrylic
  • Middle Part in white
  • Top in Lime

Parts

7
QtyValueFootprintReferences
3SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3
2RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW4, SW5
1Conn_01x04test:SSD1306-0.91-OLED-4pin-128x32J1
1Seeed Studio XIAO SAMD21Seeed Studio XIAO Series Library:XIAO-Generic-Thruhole-14P-2.54-21X17.8MMU1

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the HackClubHackPad PCB?

It measures 60 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the HackClubHackPad use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the HackClubHackPad KiCad files?

From the mouseylicense/HackClubMouseyPad repository on GitHub, at the commit this page was made from: the board is PCB/HackClubHackPad.kicad_pcb and its schematic PCB/HackClubHackPad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the HackClubHackPad design in my own project?

Its repository states no licence, so its author keeps all rights: ask mouseylicense before reusing the design.