

TRIA MotorDrive
Triple-wheel Robot for Intelligent Autonomous
- Size
- 90 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 35
- Pads
- 129
- Tracks, vias
- 175, 0
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Aug 2026
- Updated
- 5 Nov 2026
Overview
TRIA MotorDrive is an open-source printed circuit board by motii8128, from the motii8128/TRIA repository on GitHub, published under the MIT licence. It is a 2-layer board of 90 × 70 mm with 43 parts on 35 nets, routed with 175 tracks and 0 vias.
It is built around the LP2950L-33-T92-B. Its parts include 13 resistors, 12 capacitors, 7 ICs, 5 connectors and 2 switches. It belongs with the SAM D and SAM boards of this library.
Main components
1README
README.mdTRIA
Triple-wheel Robot for Intelligent Autonomous

install
sudo apt install nlohmann-json3-dev
sudo apt install protobuf-compilerParts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C4, C5, C8, C10, C14, C15 |
| 6 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R11, R12, R18, R19 |
| 4 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13, R15, R20, R21 |
| 2 | 0.33u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C6, C16 |
| 2 | 4.7k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14, R16 |
| 2 | LED | LED_THT:LED_D3.0mm | PWM1, PWM2 |
| 2 | PC817 | Package_DIP:DIP-4_W7.62mm | U6, U8 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | 100uF50V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C3 |
| 1 | 10uF16V | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1 |
| 1 | 120 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R17 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D5 |
| 1 | 470uF35V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C7 |
| 1 | 47uF16V | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C9 |
| 1 | CAN | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | LP2950L-33-T92 | Package_TO_SOT_THT:TO-92L_Inline | U7 |
| 1 | LogicBatt | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J2 |
| 1 | M78AR12-0.5 | M78AR:m78ar033-1 | U4 |
| 1 | MCP2562-E-P | Package_DIP:DIP-8_W7.62mm | U9 |
| 1 | Motor_DC | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | M2 |
| 1 | PowerBatt | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J1 |
| 1 | SeeeduinoXIAO | Seeeduino XIAO KICAD:Seeeduino XIAO-MOUDLE14P-2.54-21X17.8MM | U5 |
| 1 | TB67H450FNG_EL | footprints:P-HSOP8-0405-1p27-002_TOS | U10 |
| 1 | encoder | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | resistor_enable | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
More from motii8128/TRIA
4- 2 layers90 × 70 mm

- 2 layers90 × 70 mm

- 2 layers90 × 70 mm

- 2 layers90 × 70 mm

Similar boards
- 2 layers52.2 × 52.2 mm

Base
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
43 parts3kApache-2.0 - 2 layers146.1 × 49.5 mm

Breakout 121pin 368255-2-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
43 parts1.2k - 2 layers33 × 34 mm

- 2 layers96.1 × 78.6 mm

EYEBROW WARNING INDICATOR RIGHT
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
43 parts431 - 2 layers42.9 × 19 mm

- 2 layers99.1 × 99.7 mm

RC6502 Prototyping
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
43 parts193GPL-3.0 - 2 layers26.6 × 38.7 mm

Mdb slave esp32s3-mini
nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT
43 parts190MIT - 2 layers97.3 × 71 mm

ZynScreen v1
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
43 parts156
Questions
How big is the TRIA MotorDrive PCB?
It measures 90 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TRIA MotorDrive use?
43 parts, built around the LP2950L-33-T92-B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TRIA MotorDrive KiCad files?
From the motii8128/TRIA repository on GitHub, at the commit this page was made from: the board is tria_hardware/TRIA_MotorDrive/TRIA_MotorDrive.kicad_pcb and its schematic tria_hardware/TRIA_CentralControlBoard/TRIA_CentralControlBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TRIA MotorDrive design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).