Skip to the content
2 layers53.3 × 44.5 mmAtx breakout, the printed circuit board in 3D

This board is for an NES controller that would use Cherry MX keyboard buttons. I will probably get this made and design an enclosure for it some day.

Size
53.3 × 44.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
13
Pads
49
Tracks, vias
47, 0
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20210228)
Created
13 Apr 2021
Updated
24 Apr 2021

Overview

Atx breakout is an open-source printed circuit board by mothdotmonster, from the mothdotmonster/random-pcbs repository on GitHub. It is a 2-layer board of 53.3 × 44.5 mm with 15 parts on 13 nets, routed with 47 tracks and 0 vias.

Its parts include 5 connectors, 4 resistors, 4 diodes and 1 switch. It belongs with the interfaces and adapters boards of this library.

README

nes mx/README.md

This board is for an NES controller that would use Cherry MX keyboard buttons. I will probably get this made and design an enclosure for it some day.

image

Parts

15
QtyValueFootprintReferences
4LEDLED_THT:LED_D5.0mmD1, D2, D3, D4
2220Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R3
112VTerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ3
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
13.3VTerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ5
147Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR4
15VTerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ4
1ATX-20Connector_Molex:Molex_Mini-Fit_Jr_5566-20A2_2x10_P4.20mm_VerticalJ1
1ON/OFFTerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ2
1SW_SPSTConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalSW1
1Val**random stuff:mothfacefixedRef**

More from mothdotmonster/random-pcbs

5
  • 2 layers167.6 × 53.3 mmBreadboard, the printed circuit board in 3D

    Breadboard

    mothdotmonster/random-pcbs

    This board is for an NES controller that would use Cherry MX keyboard buttons. I will probably get this made and design an enclosure for it some day.

    171 parts
  • 2 layers91.4 × 53.3 mmMini breadboard, the printed circuit board in 3D

    Mini breadboard

    mothdotmonster/random-pcbs

    This board is for an NES controller that would use Cherry MX keyboard buttons. I will probably get this made and design an enclosure for it some day.

    91 parts
  • 2 layers45.7 × 40.6 mmOpamp, the printed circuit board in 3D

    Opamp

    mothdotmonster/random-pcbs

    This board is for an NES controller that would use Cherry MX keyboard buttons. I will probably get this made and design an enclosure for it some day.

    36 parts
  • 2 layers42.3 × 42 mmPAWPAD, the printed circuit board in 3D

    PAWPAD

    mothdotmonster/random-pcbs

    This board is for an NES controller that would use Cherry MX keyboard buttons. I will probably get this made and design an enclosure for it some day.

    31 parts
  • 2 layers110.5 × 39.4 mmNes mx, the printed circuit board in 3D

    Nes mx

    mothdotmonster/random-pcbs

    This board is for an NES controller that would use Cherry MX keyboard buttons. I will probably get this made and design an enclosure for it some day.

    22 parts

Similar boards

  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT
  • 2 layers68 × 50 mmEleLab v2 PowerFeed, the printed circuit board in 3D

    EleLab v2 PowerFeed

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    15 parts531GPL-3.0
  • 2 layers50.8 × 35.6 mmInterface, the printed circuit board in 3D

    Interface

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    15 parts454

Questions

How big is the Atx breakout PCB?

It measures 53.3 × 44.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Atx breakout use?

15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Atx breakout KiCad files?

From the mothdotmonster/random-pcbs repository on GitHub, at the commit this page was made from: the board is atx breakout/atx breakout.kicad_pcb and its schematic atx breakout/atx breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Atx breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask mothdotmonster before reusing the design.