2 layers55 × 97.5 mm
2 layers79.3 × 88.7 mm
564 rev 1
morzack/seniordes-pcbsPCB CAD files for senior design project
- Size
- 79.3 × 88.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 112
- Nets
- 66
- Pads
- 307
- Tracks, vias
- 435, 43
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Aug 2025
- Updated
- 12 Aug 2025
Overview
564 rev 1 is an open-source printed circuit board by morzack, from the morzack/seniordes-pcbs repository on GitHub. It is a 2-layer board of 79.3 × 88.7 mm with 112 parts on 66 nets, routed with 435 tracks and 43 vias.
It is built around the S1711-46R. Its parts include 30 capacitors, 24 resistors, 11 connectors, 6 ICs and 4 transistors.
Main components
1Parts
112| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | TestPoint | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP8, TP9, TP10, TP11, TP12, TP14, TP15, TP16, TP17, TP18 |
| 8 | 0.1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8, C9, C10, C11, C12, C13, C17, C20 |
| 7 | 4.7 uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C25, C26, C27, C28, C29, C30, C31 |
| 5 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R13, R14, R21, R22 |
| 4 | S1711-46R | S1711-46R:HARWIN_S1711-46R | J7, J8, J9, J10 |
| 3 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C3, C7 |
| 3 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6, R12 |
| 3 | 3.3u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C18, C19 |
| 3 | 500mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1, F2, F3 |
| 3 | Conn_01x02_Socket | Connector_AMASS:AMASS_XT60IPW-M_1x03_P7.20mm_Horizontal | J1, J4, J5 |
| 3 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_132289_EdgeMount | J2, J3, J6 |
| 3 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2, JP3, JP4 |
| 3 | LED | LED_SMD:LED_1206_3216Metric | D1, D2, D3 |
| 3 | Opamp_Dual | opa2210:GW8-VSSOP-DGK_TEX | U1, U2, U4 |
| 2 | 1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C14, C21 |
| 2 | 2N3904 | Package_TO_SOT_THT:TO-92 | Q1, Q2 |
| 2 | 4.7u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C23 |
| 2 | 649 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | 7u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C6 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | Q_NJFET_DGS | jfe150:SC70-5_DCK_TEX | Q3, Q4 |
| 1 | +3.3 | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1 |
| 1 | -3.3 | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP2 |
| 1 | 0 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R24 |
| 1 | 1.0u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C16 |
| 1 | 1.27k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R23 |
| 1 | 180 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 2.2u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C24 |
| 1 | 220 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 2k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 3.32k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R18 |
| 1 | 300k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | 30k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R17 |
| 1 | 3M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R16 |
| 1 | 4.02k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9 |
| 1 | 4.99k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R19 |
| 1 | 40db | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP4 |
| 1 | 500k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15 |
| 1 | 560n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15 |
| 1 | 6.8 uH | custom_footprints:DO1606T | L1 |
| 1 | 825 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R20 |
| 1 | 90db | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP5 |
| 1 | Jumper_3_Bridged12 | Connector_PinHeader_1.00mm:PinHeader_1x03_P1.00mm_Vertical | JP1 |
| 1 | Opamp_Dual | opa2182:SOP8_DGK_TEX | U3 |
| 1 | PDME-S5-D3-S | custom_footprints:PDMES5D3S | J13 |
| 1 | R_Trim | Potentiometer_SMD:Potentiometer_Vishay_TS53YJ_Vertical | R7 |
| 1 | fl_out | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP3 |
| 1 | gnd | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP7 |
| 1 | lpf | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP6 |
| 1 | signal | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP19 |
| 1 | ~ | custom_footprints:sd_card_socket_module | U5 |
| 1 | ~ | custom_footprints:LoRa E5 Mini | U6 |
The 106 most common of 112 parts.
More from morzack/seniordes-pcbs
2- 2 layers80.3 × 77.9 mm
Similar boards
- 2 layers58.5 × 43.5 mm
- 2 layers58 × 65 mm
- 2 layers44 × 86 mm
Steiner parker vcf
shmoergh/hog
Fully analog two-voice monophonic synth for live performances
77 parts124 - 2 layers98 × 71 mm
Mozc dial
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
112 parts3kApache-2.0 - 2 layers100 × 100 mm
- 2 layers237.5 × 102.9 mm
Instruction
jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.
112 parts301Unlicense - 2 layers224.6 × 73.2 mm
Keyboard ch552-48-lpr
rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware
112 parts236 - 2 layers277.2 × 107.5 mm
Corne V4 Pro Micro Edition
klouderone/CorneV4ProMicroEdition
The Corne V4 with Pro Micro Micocontrollers, made specifically for beginners and support for wireless microcontrollers
112 parts208CC-BY-4.0
Questions
How big is the 564 rev 1 PCB?
It measures 79.3 × 88.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 564 rev 1 use?
112 parts, built around the S1711-46R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 564 rev 1 KiCad files?
From the morzack/seniordes-pcbs repository on GitHub, at the commit this page was made from: the board is kicad_files/564_rev_1_fixed_footprints/564_rev_1.kicad_pcb and its schematic kicad_8.0_files_rev3/rev_3/ADS1262_impl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 564 rev 1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask morzack before reusing the design.