

MK UI
MuKOB (μKOB) - MorseKOB for a microcontroller-based platform.
- Size
- 99.1 × 61 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 25
- Pads
- 145
- Tracks, vias
- 364, 17
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 22 Jan 2023
- Updated
- 16 Jan 2026
Overview
MK UI is an open-source printed circuit board by MorseKOB, from the MorseKOB/MuKOB repository on GitHub, published under the MIT licence. It is a 2-layer board of 99.1 × 61 mm with 40 parts on 25 nets, routed with 364 tracks and 17 vias.
Its parts include 8 capacitors, 8 resistors, 8 switches, 3 connectors and 1 diode.
README
README.mdMuKOB (μKOB) - Micro-controller based MorseKOB Client Device
Raspberry Pi Pico W (RP2040 CPU) based device with a built-in display and a terminal interface. Uses built-in wifi to connect to the MorseKOB Server.
It interfaces to a KOB, Key + Sounder, Key + Tone, Paddle + Tone, etc. to provide Morse input and output. The device can operate completely stand-alone (using the display-touchscreen) or it can connect to a VT-220 terminal (or emulator like Putty) to provide a larger interface and allow keyboard input.
It supports both American (railroad) and International code with sounder or tone output, and allows use of Farnsworth word/character timing to promote improving copying speed.
This repo also includes the MuKOB Interface which can be used with MKOB and MorseKOB through a USB to a PC.
References
- MorseKOB Main Project
- PyKOB - The full/computer MKOB Client Application, utilities and Python libraries
- Raspberry Pi Pico W
- FatFs - Generic FAT Filesystem Module
- no-OS-FatFS-SD-SPI-RPi-Pico
Acknowledgements
The first, and probably most significant acknowledgement has to go to the architects, developers, technical writers, and other staff members responsible for the Raspberry Pi Pico and Pico W, the Raspberry Pi Pico C/C++ SDK, and the Raspberry Pi Pico C/C++ Samples.
This application implements a 'C' version of the American Morse encoding and decoding algorithms developed by Les Kerr.
The FAT file system and SD card libraries, with some small modifications (to configure for the MuKOB board and remove some printing), are from ChaN and Carl Kugler respectively.
As with every significant C project I've undertaken since the early '80s, my 'go-to' reference is The C Programming Language by Brian Kernighan and Dennis Ritchie (Prentice Hall, 1978 & 1988).
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_THT:C_Axial_L5.1mm_D3.1mm_P7.50mm_Horizontal | C1, C2, C3, C4, C5, C6, CF1, CF2 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R7 |
| 2 | LOGO | AES_Library:SILKY-DESIGN-logo-0_50-AES | G***, G*** |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 15k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 28k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 6.8k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | OPT1 |
| 1 | Conn_01x20-FFC | AES_Library:Amphenol_F51L_1x20_P1.00mm_Horizontal-FFC | J1 |
| 1 | DN | AES_Library:SW_PUSH_SMD_1P1T_NO_6x6mm | SW5 |
| 1 | Disp-2.8 | MountingHole:MountingHole_3.2mm_M3 | M_DISP1 |
| 1 | Disp-3.5 | MountingHole:MountingHole_3.2mm_M3 | M_DISP2 |
| 1 | Disp-4.0 | MountingHole:MountingHole_3.2mm_M3 | M_DISP3 |
| 1 | EN | AES_Library:SW_PUSH_SMD_1P1T_NO_6x6mm | SW3 |
| 1 | LF | AES_Library:SW_PUSH_SMD_1P1T_NO_6x6mm | SW2 |
| 1 | PWR | AES_Library:LED_SMD_SIDEVIEW_Harvatek | LED1 |
| 1 | RE-AO | AES_Library:SW_PUSH_SMD_1P1T_NO_45x45mm-CK | SW6 |
| 1 | RE-BO | AES_Library:SW_PUSH_SMD_1P1T_NO_45x45mm-CK | SW7 |
| 1 | RE-SO | AES_Library:SW_PUSH_SMD_1P1T_NO_45x45mm-CK | SW8 |
| 1 | RT | AES_Library:SW_PUSH_SMD_1P1T_NO_6x6mm | SW4 |
| 1 | RotEnc-SW | Rotary_Encoder:RotaryEncoder_Bourns_Vertical_PEC12R-3xxxF-Sxxxx | RE1 |
| 1 | SW_MATRIX-Conn | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | TFT-SPI w/Touch 9/5 | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | DISP-1 |
| 1 | UI 20-RBN | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J2 |
| 1 | UP | AES_Library:SW_PUSH_SMD_1P1T_NO_6x6mm | SW1 |
More from MorseKOB/MuKOB
8- 4 layers123.2 × 125.7 mm

- 2 layers104.1 × 78.7 mm

- 2 layers104.1 × 78.7 mm

- 2 layers103 × 59.6 mm

- 2 layers104.1 × 78.7 mm

- 2 layers104.1 × 78.7 mm

- 2 layers48.7 × 30.5 mm

- 2 layers25.4 × 38.1 mm

Similar boards
- 2 layers139.7 × 73.7 mm

- 2 layers149.4 × 177.4 mm

Lightsculpture
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
40 parts915 - 2 layers150 × 50 mm

EleLab v2 Bus150
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
40 parts531GPL-3.0 - 2 layers66.4 × 48.1 mm

Raspberry
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
40 parts456 - 2 layers44 × 44 mm

- 2 layers90.8 × 53.3 mm

- 2 layers59.6 × 109.5 mm

Drop
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
40 parts410 - 2 layers123.8 × 73.5 mm

Questions
How big is the MK UI PCB?
It measures 99.1 × 61 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MK UI use?
40 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MK UI KiCad files?
From the MorseKOB/MuKOB repository on GitHub, at the commit this page was made from: the board is hw/MK-UI.kicad_pcb and its schematic hw/MK-CommAdapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MK UI design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).