Skip to the content
2 layers35 × 35 mmXiaoSensePcb, the printed circuit board in 3D

A github repo to hold code related to my exploration into creating an open source disc

Size
35 × 35 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
22
Pads
28
Tracks, vias
17, 2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
18 May 2024
Updated
8 Dec 2024

Overview

XiaoSensePcb is an open-source printed circuit board by morgankenyon, from the morgankenyon/OpenDataDisc repository on GitHub. It is a 2-layer board of 35 × 35 mm with 4 parts on 22 nets, routed with 17 tracks and 2 vias.

Its parts include 1 IC and 1 connector. It belongs with the nRF52 and nRF5x boards of this library.

README

README.md

OpenDataDisc

An open platform that allows disc golfers to collect their throw statistics.

Your throw, your data, your platform.

Pics

Putter Dev Board OpenDataDisc Housing

Putter Board Mounted On Disc OpenDataDisc On Disc

I'm documentating my process over on my youtube channel.

Disc Golf + Analytics

I'd love the ablity to track and measure my disc golf throws without spending tons of money.

  • Would it be easier to buy one of the currently available products? Probably.
  • What's the likelihood this project never completes its goal? Higher than 0.

So why I am doing it? I'm a sucker for starting something new, I'm a software developer, have started playing disc golf and wanted a project to combine those 2.

Will that mix actually produce something usable? No idea.

Current Project Phase

Phase: Putter version

As shown in the pics above, I have a putter dev board that I'm just starting to use to measure statistics of putts.

Putts are easier to measure due to low speeds and rpms.

Project Phases (Somewhat flexible now)

  • Getting to know hardware
    • Buying the hardware I think I need.
    • Hooking everything up.
    • Getting data flowing between microcontroller and computer.
    • Getting some basic calculations working
  • Putter version (current phase)
    • Putts have slow RPMs and low Gs
      • These values are much easier to measure and test.
      • Hardware is also cheaper.
      • Will probably be using as many off the shelf parts as possible. (Nothing really custom designed)
    • Create a developer kit that can be used for putters.
      • Not something that would probably be widely available, but might create some dev kits for technical people wanting to help.
    • Need some hardware to confirm the sensor values.
      • Speed gun, high speed camera, etc
    • Most R&D on this project will be based on this platform.
  • Alpha Driver Disc
    • To develop something to track high speed throws, will probably need:
      • Custom hardware
      • Beefed up software
      • More expensive testing equipment
  • Beta Driver Disc
    • Create a more refined alpha setup
    • Any problems I encountered in the Alpha disc can be changed here
  • Driver Disc
    • First proper product release
    • Should be easy for non technical people to setup and use
    • Lots of polish will need to happen before this is ready

Repo Layout

This repo holds both hardware and software for the OpenDataDisc project. As this project is still in it's early phase, there's no instructions on how to build your own and run on your own computers.

That information will come as the project progresses.

Parts

4
QtyValueFootprintReferences
2~Connector_Wire:SolderWirePad_1x01_SMD_1x2mmBat-, Bat+
1Conn_01x02Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_HorizontalJ1
1Seeed Studio XIAO nRF52840Seeed-XIAO:XIAO-nRF52840-Sense-14P-2.54-21X17.8MMU1

Similar boards

  • 2 layers18.5 × 26 mm24g2usb rp2350zero, the printed circuit board in 3D

    24g2usb rp2350zero

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    4 parts1.7kApache-2.0
  • 2 layers116 × 33 mm966595-1 and 963356-1, the printed circuit board in 3D

    966595-1 and 963356-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    4 parts1.2k
  • 2 layers19 × 18 mmDaughter board, the printed circuit board in 3D

    Daughter board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    4 parts915
  • 2 layers24.8 × 24.8 mmNrf24 breakout, the printed circuit board in 3D

    Nrf24 breakout

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    4 parts803MIT
  • 2 layers26 × 20 mmCap chain, the printed circuit board in 3D

    Cap chain

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    4 parts744MIT
  • 2 layers34.7 × 20 mmXG Station Power MSI, the printed circuit board in 3D

    XG Station Power MSI

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    4 parts712CC-BY-4.0
  • 2 layers20.3 × 24.5 mmJack power input, the printed circuit board in 3D

    Jack power input

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    4 parts546MIT

Questions

How big is the XiaoSensePcb PCB?

It measures 35 × 35 mm and has 2 copper layers, 1.6 mm thick.

What parts does the XiaoSensePcb use?

4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the XiaoSensePcb KiCad files?

From the morgankenyon/OpenDataDisc repository on GitHub, at the commit this page was made from: the board is hardware/examples/01_nrf52Sense_Pcb/pcbProject/XiaoSensePcb/XiaoSensePcb.kicad_pcb and its schematic hardware/examples/01_nrf52Sense_Pcb/pcbProject/XiaoSensePcb/XiaoSensePcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the XiaoSensePcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask morgankenyon before reusing the design.