
Prismo reader
hacklabkyiv/prismo-reader
RFID readers of Prismo access management system

Zvonecek is an open-source printed circuit board by mordae, from the mordae/zvonecek repository on GitHub. It is a 2-layer board of 200 × 80.3 mm with 44 parts on 49 nets, routed with 434 tracks and 96 vias.
It is built around the ESP32-WROOM-32D and WS2812B. Its parts include 19 switches, 8 diodes, 7 connectors, 4 ICs and 3 capacitors. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | SW_SPST | Library:BUTTON | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW10, SW11, SW12, SW13, SW15, SW16, SW17, SW18, SW19 +2 |
| 8 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J5, J8 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9, J10 |
| 2 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1, J3 |
| 1 | 01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | ESP32-WROOM-32D | Library:ESP32-WROOM-32 | U1 |
| 1 | MAX98357-BRK | Library:MAX98357-BRK | U4 |
| 1 | MICROSD-BRK | Library:MICROSD-BRK | U3 |
| 1 | SW_DP3T | Library:SWITCH | SW14 |
| 1 | TPS63030-BRK | Library:TPS63030-BRK | U2 |

hacklabkyiv/prismo-reader
RFID readers of Prismo access management system


CommanderRedYT/ws2812-clock
A simple pcb clock using ws2812 in 7-segment form


pasachan/ESP-32-RELAY-CONTROLLER
An 8-channel relay controller with Wi-Fi, an RS-485 field bus, and a 12 V power rail for downstream nodes. Designed as the master board for a small home-automation network: this board switches loads directly, talks to…


C3MA/MrReflow
To achieve that, readings from a thermocouple are used for closed loop temperature control of the target board. The controller does it's best to follow a preconfigured temperature profile for a particular SMT soldering.

It measures 200 × 80.3 mm and has 2 copper layers, 1.6 mm thick.
44 parts, built around the ESP32-WROOM-32D and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mordae/zvonecek repository on GitHub, at the commit this page was made from: the board is hw/zvonecek/zvonecek.kicad_pcb and its schematic hw/zvonecek/primary.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mordae before reusing the design.