2 layers49 × 49 mm
2 layers127 × 55.9 mm
Barbecue
mordae/barbecue- Size
- 127 × 55.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 60
- Pads
- 191
- Tracks, vias
- 252, 37
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Dec 2022
- Updated
- 8 Feb 2023
Overview
Barbecue is an open-source printed circuit board by mordae, from the mordae/barbecue repository on GitHub, published under the MIT licence. It is a 2-layer board of 127 × 55.9 mm with 47 parts on 60 nets, routed with 252 tracks and 37 vias.
It is built around the RP2040, HLK-PM01 and W25Q128JVSIQ, with the AMS1117-3.3, AO3400A and EN11-HSM1AF15 among its other parts. Its parts include 12 capacitors, 9 resistors, 8 connectors, 4 ICs and 3 transistors. It belongs with the RP2040 boards of this library.
Main components
7
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
EN11-HSM1AF15
Through holeThrough hole Rotary Encoders ROHSTT ElectronicsRotary Encoders
X322512MSB4SI
SMD3225-4P-40℃~+85℃ 12MHz 20pF 80Ω Crystal Oscillator ±10ppm ±20ppm SMD3225-4P Crystals ROHSYXCCrystals
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 22u | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6, C7, C8, C9, C10, C11, C12 |
| 4 | 47k | Resistor_SMD:R_0402_1005Metric | R2, R3, R8, R9 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | Tooling | Barbecue:ToolingHole | H5, H6, H7, H8 |
| 3 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 30p | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 1 | 47590-0001 | Barbecue:USB_Micro-AB_Molex_47590-0001 | J1 |
| 1 | +FAN1- | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J7 |
| 1 | +FAN2- | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J8 |
| 1 | +HEAT- | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J5 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | EN11-HSM1AF15 | Barbecue:EN11-HSM1AF15 | SW1 |
| 1 | HLK-PM01 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 1 | ILI9225-MOD | Barbecue:ILI9225-MOD | U4 |
| 1 | NTC | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J6 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J2 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U1 |
| 1 | X322512MSB4SI | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | bootsel | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | gnd clk swd | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
Similar boards
- 4 layers60 × 56.1 mm
AvionicsPower
esb8/AvionicsPower
PCB of a Power Management and supply board for an Avionics stack.
82 parts2 - 4 layers72.6 × 170 mm
OpenJBOD RP2040
OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.
129 parts87CERN-OHL-P-2.0 - 2 layers149.9 × 167.6 mm
Collins FMS-3000
neilenns/Collins-FMS-3000
PCB for a replica Collins FMS-3000 to use with MobiFlight
126 parts6MIT - 2 layers42 × 98.1 mm
- 2 layers99.1 × 99 mm
XDuinoRail Debug
chatelao/xDuinoRail-Decoder
The friendly decoder development plattform for model railroad tinkers.
170 partsAGPL-3.0 - 2 layers
- 2 layers249.7 × 99.4 mm
Kicadproj
steven-na/saria
An rp2040 based, wired, split-ergo, mechanical keyboard. Running on QMK firmware
148 parts
Questions
How big is the Barbecue PCB?
It measures 127 × 55.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Barbecue use?
47 parts, built around the RP2040, HLK-PM01, W25Q128JVSIQ and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Barbecue KiCad files?
From the mordae/barbecue repository on GitHub, at the commit this page was made from: the board is hw/barbecue/barbecue.kicad_pcb and its schematic hw/barbecue/barbecue.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Barbecue design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).