moraszk/pixie2Pixie2 is an open-source printed circuit board by moraszk, from the moraszk/pixie2 repository on GitHub. It is a 2-layer board of 69.8 × 46 mm with 46 parts on 22 nets, routed with 133 tracks and 0 vias.
It is built around the LM386, BC547 and SB160. Its parts include 17 capacitors, 7 resistors, 4 diodes, 4 inductors and 2 transistors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 470p | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C4, C5, C6, C9, C15 |
| 4 | 47u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C14, C16, C17 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 100n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C2, C3, C11 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R6 |
| 2 | 10n | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C7, C8 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R3 |
| 1 | 100k | Potentiometer_THT:Potentiometer_Piher_PT-6-V_Vertical | RV1 |
| 1 | 100p | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C13 |
| 1 | 100u | Inductor_THT:L_Axial_L7.0mm_D3.3mm_P5.08mm_Vertical_Fastron_MICC | L1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P5.08mm_Vertical_KathodeUp | D2 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P2.54mm_Vertical_KathodeUp | D3 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D4 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R7 |
| 1 | 1n | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C12 |
| 1 | 220p | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C10 |
| 1 | 22u | Inductor_THT:L_Axial_L7.0mm_D3.3mm_P10.16mm_Horizontal_Fastron_MICC | L2 |
| 1 | 2N2219 | Package_TO_SOT_THT:TO-39-3 | Q2 |
| 1 | 2k2 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4 |
| 1 | 2u2 | Inductor_THT:L_Axial_L7.0mm_D3.3mm_P5.08mm_Vertical_Fastron_MICC | L4 |
| 1 | 2u2 | Inductor_THT:L_Axial_L7.0mm_D3.3mm_P10.16mm_Horizontal_Fastron_MICC | L3 |
| 1 | 3579kHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R5 |
| 1 | AudioJack2 | Connector_Audio:Jack_3.5mm_Ledino_KB3SPRS_Horizontal | J2 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | Battery | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | BT1 |
| 1 | Conn_Coaxial | MountingHole:MountingHole_4.3mm_M4_Pad | J1 |
| 1 | LM386 | Package_DIP:DIP-8_W7.62mm_LongPads | U1 |
| 1 | SB160 | Diode_THT:D_DO-41_SOD81_P5.08mm_Vertical_KathodeUp | D1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H9.5mm | SW1 |
The 45 most common of 46 parts.
It measures 69.8 × 46 mm and has 2 copper layers, 1.6 mm thick.
46 parts, built around the LM386, BC547 and SB160. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the moraszk/pixie2 repository on GitHub, at the commit this page was made from: the board is pixie2.kicad_pcb and its schematic pixie2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask moraszk before reusing the design.
VictorRavani/Irrigation_IoT
This project covers the complete development of Hardware and Firmware for IoT-based supervisory control. It offers all the necessary information and resources so that anyone can set up the system independently.
Teille98/HVGene-OpenHardware
Open-source, digitally controlled high-voltage AC power supply for cold atmospheric plasma (CAP) research, developed with a specific focus on flexible-endoscope decontamination applications.
RobertPHeller/CommandStationsAndBoosters
Command Stations and Boosters
