Moosdijk/MOD-Remote1This repository contains the source code and design files for the MOD Remote, a device which came out of my final thesis at Industrial Design at the Technical University in Eindhoven.
MODremote TX is an open-source printed circuit board by Moosdijk, from the Moosdijk/MOD-Remote repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 94.5 × 48 mm with 5 parts on 12 nets, routed with 106 tracks and 4 vias.
Its parts include 3 connectors, 1 IC and 1 switch.
This repository contains the source code and design files for the MOD Remote, a device which came out of my final thesis at Industrial Design at the Technical University in Eindhoven.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | LolinD32 | LoLinD32_Board:LolinD32 | U1 |
| 1 | SW_Push_SPDT | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW1 |
| 1 | To MPU9250 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1 |
It measures 94.5 × 48 mm and has 2 copper layers, 1.6 mm thick.
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Moosdijk/MOD-Remote repository on GitHub, at the commit this page was made from: the board is PCB design files/MODRemote/MODremote_TX.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Moosdijk/MOD-Remote
This repository contains the source code and design files for the MOD Remote, a device which came out of my final thesis at Industrial Design at the Technical University in Eindhoven.
Moosdijk/MOD-Remote
This repository contains the source code and design files for the MOD Remote, a device which came out of my final thesis at Industrial Design at the Technical University in Eindhoven.
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.