
Amulet encoder
EPFLXplore/XRE_LeggedRobot_HW
PCB designs for Xplore Research's robot dog project

Multi-channel 4-wire RTD readout for a LabJack T7 Pro.
Rtd readout is an open-source printed circuit board by Moore-Lab, from the Moore-Lab/excitation-current-source-v2 repository on GitHub. It is a 4-layer board of 159.5 × 100 mm with 47 parts on 31 nets, routed with 241 tracks and 53 vias.
Its parts include 14 resistors, 8 capacitors, 7 connectors, 4 diodes and 2 ICs.
Multi-channel 4-wire RTD readout for a LabJack T7 Pro.
Each RTD gets its own constant-current loop: a current-regulator diode (CRD, ~220 µA)
drives a precision reference resistor R_ref in series with the RTD. The RTD voltage
V_RTD is read on the T7's existing differential pairs; the current-sense voltage
V_ref is digitized on-board by I²C ADS1115 ADCs on the T7's digital lines. Each RTD
is then computed ratiometrically as R_RTD = C · (V_RTD / V_ref), where the per-channel
constant C is found by one-time cross-calibration against a known resistor. This makes
the result independent of the CRD's accuracy and R_ref's absolute value, and fits within the
T7's already-committed 7 analog pairs by moving V_ref onto the I²C bus.
This build (locked, docs/board_spec.md §Resolved inputs): Pt100 RTDs, T7 range ±0.1 V;
3 channels → 3 CRD/R_ref unit cells, 2 ADS1115 (ADDR 0x48/0x49; 4 differential V_ref
reads, 1 spare), 3 RTD 4-wire connectors. The result is ratiometric across two ADCs
(T7 + ADS1115), so the dominant design concern is protecting the precision-analog path
(sense + V_ref) and keeping the I²C/digital side off it.
docs/USER_MANUAL.md — one place to understand the board, see what was
built, and check the verification evidence (ERC/DRC/SPICE) before fab.docs/board_spec.md (electrical source of truth).CLAUDE.md → docs/SESSION_KICKOFF.md.docs/PARALLEL_PLAN.md + docs/tasks/.docs/DIRECTORY_MANAGEMENT.md, docs/BOARD_DEV_CHECKLIST.md,
docs/TESTING_PLAN.md.kicad-cli on PATH, else at
the standard Windows install (C:\Program Files\KiCad\<ver>\bin\kicad-cli.exe); override
with KICAD_CLI=/path/to/kicad-cli. A KiCad major bump can rewrite the .kicad_*
formats — bump the pin in scripts/lib.sh deliberately and note it in the log.sim/).host/ (Track C). Not used by the gate
scripts, which are POSIX sh (run under Git Bash on Windows or natively on Linux/macOS).The cheap, machine-checkable gates run from one entry point. It degrades gracefully: with no KiCad design files yet (before the schematic/PCB land) it reports "nothing to check" and exits 0, so every track and the integration step run it identically.
sh scripts/run_gates # ERC + DRC -> reports/{erc,drc}/, nonzero on any error
sh scripts/run_gates --tag s007 # stamp reports as erc_s007.json / drc_s007.json| Script | Does | Output |
|---|---|---|
scripts/run_gates | ERC + DRC; the gate every session runs | reports/{erc,drc}/*.json |
scripts/erc | ERC only (canonical command) | reports/erc/erc_<tag>.json |
scripts/drc | DRC only (refills zones; never saves the board) | reports/drc/drc_<tag>.json |
scripts/export_bom | BOM incl. Tempco field (R_ref stability) | reports/bom/bom_<tag>.csv |
scripts/export_netlist | Schematic netlist for the SPICE harness | sim/netlists/rtd-readout.net |
scripts/fab_drop | Gerbers + drill + pos + STEP + BOM | fab/** (gitignored) |
scripts/lib.sh | Shared helpers (sourced, not run) | — |
reports/** is generated but committed (cheap, diffs well, gives the log something to
cite); regenerate it from these scripts, never hand-edit. Default tag is latest (overwrites
for clean diffs); pass --tag sNNN to keep a session-stamped copy.
sh scripts/install_hooks # installs a pre-commit hook that runs scripts/run_gatesOpt-in (not installed automatically, so it never surprises a parallel-track worktree). It's a
no-op until the schematic/PCB exist. Remove it with rm "$(git rev-parse --git-path hooks)/pre-commit".
Only at a reviewed, DRC-clean, tagged rev — fab/ is gitignored; capture the drop with a
git tag, never leave it in-tree (docs/DIRECTORY_MANAGEMENT.md).
sh scripts/run_gates && git tag rev-A # gate, then tag the reviewed state
sh scripts/fab_drop # gerbers/drill/pos/step/bom -> fab/
git tag fab-rev-A # capture the manufacturing drop| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | TestPoint | rtd-readout:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10 |
| 8 | 1k | R_0805_2012Metric | R7, R8, R9, R10, R11, R12, R13, R14 |
| 4 | 0.1uF | rtd-readout:C_1206_3216Metric | C5, C6, C7, C8 |
| 4 | CRD ~100uA | rtd-readout:D_SEMITEC_S-101T | D1, D2, D3, D4 |
| 4 | Conn_RTD_4W | rtd-readout:TerminalBlock_Phoenix_PT-1,5-5-3.5-H_1x05_P3.50mm_Horizontal | J1, J2, J3, J7 |
| 3 | 1k | rtd-readout:R_1206_3216Metric | R1, R2, R3 |
| 2 | 0.1uF | rtd-readout:C_0805_2012Metric | C1, C2 |
| 2 | 10uF | rtd-readout:C_0805_2012Metric | C3, C4 |
| 2 | 4.7k | rtd-readout:R_0805_2012Metric | R4, R5 |
| 2 | TestPoint | TestPoint_Pad_D1.5mm | TP11, TP12 |
| 1 | 1k | R_1206_3216Metric | R6 |
| 1 | ADS1115IDGS (0x48) | rtd-readout:MSOP-10_3x3mm_P0.5mm | U1 |
| 1 | ADS1115IDGS (0x49) | rtd-readout:MSOP-10_3x3mm_P0.5mm | U2 |
| 1 | Conn_Power | rtd-readout:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J6 |
| 1 | Conn_T7_I2C | rtd-readout:Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J5 |
| 1 | Conn_T7_RJ45 | rtd-readout:RJ45_Amphenol_RJHSE5380 | J4 |

EPFLXplore/XRE_LeggedRobot_HW
PCB designs for Xplore Research's robot dog project


loudifier/OpenRefMic
open hardware design for a high-performance low-cost measurement microphone




rjwalters/kicad-tools
Standalone Python tools for parsing and manipulating KiCad schematic and PCB files

It measures 159.5 × 100 mm and has 4 copper layers, 1.6 mm thick.
47 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Moore-Lab/excitation-current-source-v2 repository on GitHub, at the commit this page was made from: the board is hardware/rtd-readout.kicad_pcb and its schematic hardware/rtd-readout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Moore-Lab before reusing the design.