Skip to the content
2 layers39.9 × 42 mmNavspark rpi shield, the printed circuit board in 3D

NavSpark Shield for Raspberry Pi

Size
39.9 × 42 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
31
Pads
55
Tracks, vias
107, 11
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
20 Dec 2015
Updated
10 Nov 2021

Overview

Navspark rpi shield is an open-source printed circuit board by moonpunchorg, from the moonpunchorg/navspark-rpi-shield repository on GitHub. It is a 2-layer board of 39.9 × 42 mm with 7 parts on 31 nets, routed with 107 tracks and 11 vias.

Its parts include 3 connectors and 2 capacitors.

README

README.md

NavSpark Shield for Raspberry Pi

CERN OSHW licensed

NavSpark is Arduino compatible microcontroller board that has built in satellite navigation (GPS by default, and some models add GLONASS, BeiDou, etc...).

This adapter board provides means to connect the NavSpark board to a Raspberry Pi / Raspberry Pi 2.

For one example usecase, could create a local network NTP server with accurate statellite timing through GPS+1PPS

Files

This repository contains the design files using KiCad 4.0. The appropriate directories also contain the Gerber files, ready to be manufactured.

A note for those using Seeed's FusionPCB service: the edge cuts filename needs to be changed from *.gm1 to *.gml, and the drill file from *.drl to .txt.

PCB

Revision v1, the proof of concept looks like this:

PCB Front

PCB Back

License

Copyright 2015 Gergely Imreh imrehg@gmail.com

This documentation describes Open Hardware and is licensed under the CERN OHL v1.2.

You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions.

Parts

7
QtyValueFootprintReferences
110pCapacitors_SMD:C_0603_HandSolderingC2
110uCapacitors_SMD:C_0805_HandSolderingC1
1MOONPUNCH_LOGOnavspark:moonpunch_1cmG***
1NAV_01X12Socket_Strips:Socket_Strip_Straight_1x12P3
1NAV_01X13Socket_Strips:Socket_Strip_Straight_1x13P2
1OSHW_LOGOnavspark:oshw_logoG***
1RPI_02X13Socket_Strips:Socket_Strip_Straight_2x13P1

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the Navspark rpi shield PCB?

It measures 39.9 × 42 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Navspark rpi shield use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Navspark rpi shield KiCad files?

From the moonpunchorg/navspark-rpi-shield repository on GitHub, at the commit this page was made from: the board is navspark_rpi_shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Navspark rpi shield design in my own project?

Its repository states no licence, so its author keeps all rights: ask moonpunchorg before reusing the design.