

Ps card
power supply card
- Size
- 132.7 × 74.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 14
- Pads
- 120
- Tracks, vias
- 60, 217
- Pours
- 30
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Nov 2024
- Updated
- 27 Nov 2024
Overview
Ps card is an open-source printed circuit board by mohitsingh2806, from the mohitsingh2806/ps_card repository on GitHub. It is a 2-layer board of 132.7 × 74.8 mm with 34 parts on 14 nets, routed with 60 tracks and 217 vias.
It is built around the DE2E3SA472MA3BX02F, B32922C3474K289 and DE2E3SA332MA3BX02F, with the 2100LL-560-H-RC, 50ZLH220MEFC10X16 and EKXL421ELL121MM30S among its other parts. Its parts include 15 capacitors, 3 resistors, 2 connectors, 2 inductors and 1 IC.
Main components
9DE2E3SA472MA3BX02F
插件,P=7.5mm-40℃~+125℃ 300V 4.7nF X1、Y2 ±20% Plugin,P=7.5mm Safety Capacitors ROHSMurataSafety CapacitorsB32922C3474K289
插件,P=15mm-40℃~+110℃ 305V 470nF X2 ±10% Plugin,P=15mm Safety Capacitors ROHSTDKSafety CapacitorsDE2E3SA332MA3BX02F
插件,P=7.5mm-40℃~+125℃ 3.3nF 300V X1、Y2 ±20% Plugin,P=7.5mm Safety Capacitors ROHSMurataSafety Capacitors2100LL-560-H-RC
插件,D=21.8mm26mΩ 56uH 5A ±15% 插件,D=21.8mm Power Inductors ROHSBournsPower Inductors50ZLH220MEFC10X16
插件,D10xL16mm-40℃~+105℃ 10000hrs@105℃ 10mm 16mm 220uF 50V 5mm ±20% 插件,D10xL16mm Aluminum Electrolytic Capacitors - Leaded ROHSRubyconAluminum Electrolytic Capacitors - LeadedEKXL421ELL121MM30S
插件,D18xL30mm-40℃~+105℃ 1.8A@100kHz 12000hrs@105℃ 120uF 18mm 30mm 420V 7.5mm ±20% 插件,D18xL30mm Aluminum Electrolytic Capacitors - Leaded ROHSNippon Chemi-ConAluminum Electrolytic Capacitors - LeadedGRJ31CR72A105KE11L
1206100V 1uF X7R ±10% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMurataMultilayer Ceramic Capacitors MLCC - SMD/SMTMOV-10D621K
插件1.025kV 160pF@1kHz 2.5kA 385V 400mW 505V 620V 70J 插件 Varistors ROHSBournsVaristorsSM1206URC
1206140° 2.1V 20mA 55mcd 640nm 655nm Red Water Clear 1206 LED Indication - Discrete ROHSBIVARLED Indication - Discrete
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | DE2E3SA472MA3BX02F | mohit:CAP_DE2E3KY472MB3BM02F_MUR | C2, C3, C5, C7, C8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.5mm_Pad_Via | MH1, MH2, MH3, MH4 |
| 3 | B32922C3474K | mohit:CAP_B32922C3474K000_TDK | C1, C4, C6 |
| 3 | DE2E3SA332MA3BX02F | mohit:CAP_DE2E3KY472MB3BM02F_MUR | C11, C12, C13 |
| 2 | DNP | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | TestPoint | Connector_Pin:Pin_D1.0mm_L10.0mm_LooseFit | TP1, TP2 |
| 1 | 2.2K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 2100LL-560-H-RC | mohit:IND_2100LL_34_H | L2 |
| 1 | 39213150000 | mohit:FUS_LITTELFUSE_392_LTF | F1 |
| 1 | 430450402 | mohit:430450402_MOL | J1 |
| 1 | 430451602 | mohit:CON_430451602_MOL | J2 |
| 1 | 50ZLH220MEFC10X16 | mohit:CAP_YX_10X16_RUB | C14 |
| 1 | 744823220 | mohit:744823220 | L1 |
| 1 | B57236S0509M054 | mohit:THRMRB500W60L1150T500H1600 | RT1 |
| 1 | EKXL421ELL121MM30S | mohit:EKXL421ELL121MM30S | C10 |
| 1 | GRJ31CR72A105KE11L | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15 |
| 1 | LOGO | mohit:logo_Cu | G*** |
| 1 | MOV-10D621K | Varistor:RV_Disc_D9mm_W4.4mm_P5mm | RV1 |
| 1 | RDER72J104K8K1C11B | mohit:R-8K1_MUR | C9 |
| 1 | SM1206URC | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | ~ | mohit:ACQ100 | U1 |
Similar boards
- 2 layers264.8 × 118.6 mm

- 2 layers142.5 × 106.4 mm

- 2 layers26 × 30 mm

Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 2 layers171.2 × 72.9 mm

Amiga gfxcard old
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
34 parts1k - 2 layers53.5 × 62.5 mm

Led matrix
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
34 parts915 - 2 layers45 × 26 mm

- 2 layers41.7 × 25.7 mm

Headphones flex pcb rigid
strangeparts/niubi-headphones
Flexible circuit board design for adding a headphone jack to an iPhone 7
34 parts493MIT - 2 layers18.8 × 16.3 mm

Questions
How big is the Ps card PCB?
It measures 132.7 × 74.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ps card use?
34 parts, built around the DE2E3SA472MA3BX02F, B32922C3474K289, DE2E3SA332MA3BX02F and 2100LL-560-H-RC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ps card KiCad files?
From the mohitsingh2806/ps_card repository on GitHub, at the commit this page was made from: the board is PS_CARD.kicad_pcb and its schematic PS_CARD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ps card design in my own project?
Its repository states no licence, so its author keeps all rights: ask mohitsingh2806 before reusing the design.