Skip to the content
2 layers36 × 22 mmRc filter, the printed circuit board in 3D

A side-by-side tscircuit and KiCad viewer

Size
36 × 22 mm
Copper layers
2
Thickness
1.6 mm
Parts
2
Nets
3
Pads
4
Tracks, vias
3, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
4 Sep 2026
Updated
6 Sep 2026

Overview

Rc filter is an open-source printed circuit board by mohan-bee, from the mohan-bee/tscircuit-gpt-benchmark repository on GitHub. It is a 2-layer board of 36 × 22 mm with 2 parts on 3 nets, routed with 3 tracks and 0 vias.

Its parts include 1 capacitor and 1 resistor.

README

public/benchmarks/bench-002/kicad/README.md

ESP32 LoRa sensor board

Original native KiCad design from the GPT-6 (Codex) board-creation task. No tscircuit output was created; its comparison entry is pending.

Active board-creation time is estimated at 35–40 minutes, excluding the interruption. This was inferred from saved file timestamps, not measured with an active-time timer. It excludes the subsequent viewer/PR work. No reliable token count was recorded.

The board is 54 × 50 mm, 1.0 mm thick, with two copper layers, 44 components and 31 nets. validation.json records 157 verified pin connections, 346 track segments and 48 vias. The included DRC/ERC reports have no violations and the PCB has no unconnected items. The design has not been fabricated or bench-tested; these are CAD results, not physical performance measurements.

It uses an ESP32-C3-WROOM-02U, RFM95W-868S2, TMP102 and LIS3DH. Battery input is for an externally charged, protected 1S LiPo; no charger is included. The native PCB and schematic are displayed with the repository's existing KiCanvas viewer. The generated 3D snapshot lacks USB-C and RFM95 module bodies because their library footprints have no 3D models; their native footprint geometry is present.

Snapshots were regenerated from the sources in this directory with KiCad CLI 10.0.1:

sh
kicad-cli sch upgrade sensor-node.kicad_sch --force
kicad-cli pcb upgrade sensor-node.kicad_pcb --force
kicad-cli sch export svg --black-and-white --exclude-drawing-sheet -o ./ sensor-node.kicad_sch
kicad-cli pcb render --side top --quality high --width 1500 --height 1500 -o pcb.png sensor-node.kicad_pcb

The project-local symbols and footprints derive from KiCad libraries, under CC BY-SA 4.0 with the KiCad library exception. Routing used Freerouting 2.4.1. The LIS3DH symbol is configured for I²C mode and connector silk overhangs are moved to the fabrication layer.

Parts

2
QtyValueFootprintReferences
1100nFCapacitor_SMD:C_0805_2012MetricC1
11kResistor_SMD:R_0805_2012MetricR1

Similar boards

  • 2 layers37 × 19 mmPassive rpi hub75-adapter, the printed circuit board in 3D

    Passive rpi hub75-adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    2 parts4.4kGPL-2.0
  • 2 layersDiode template, the printed circuit board in 3D

    Diode template

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    2 parts547GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 button, the printed circuit board in 3D

    L0 button

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    2 parts546MIT
  • 2 layers35.1 × 46.8 mmSDEX2M2 Breakout Board, the printed circuit board in 3D

    SDEX2M2 Breakout Board

    NVNTLabs/switch2-SDEX2M2

    Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

    2 parts542GPL-3.0
  • 2 layers59.3 × 36.6 mmExpansionBoardTemplate, the printed circuit board in 3D

    ExpansionBoardTemplate

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    2 parts459GPL-3.0
  • 2 layersAlpha.9mm.wire, the printed circuit board in 3D

    Alpha.9mm.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    2 parts410
  • 2 layers26.7 × 64 mmGpu power, the printed circuit board in 3D

    Gpu power

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    2 parts397Apache-2.0

Questions

How big is the Rc filter PCB?

It measures 36 × 22 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rc filter use?

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rc filter KiCad files?

From the mohan-bee/tscircuit-gpt-benchmark repository on GitHub, at the commit this page was made from: the board is public/examples/kicad/rc-filter.kicad_pcb and its schematic public/benchmarks/bench-001/kicad/robot-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rc filter design in my own project?

Its repository states no licence, so its author keeps all rights: ask mohan-bee before reusing the design.