2 layers148 × 84.5 mm
Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
259 parts410
2 layers60.6 × 46 mm
Mixor Image v5
modular-maculata/mixor-image16Modular Maculata 'Mixor Image' Eurorack Module
- Size
- 60.6 × 46 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 83
- Nets
- 30
- Pads
- 164
- Tracks, vias
- 201, 0
- Pours
- 19
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Aug 2021
- Updated
- 31 Mar 2022
Overview
Mixor Image v5 is an open-source printed circuit board by modular-maculata, from the modular-maculata/mixor-image repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 60.6 × 46 mm with 83 parts on 30 nets, routed with 201 tracks and 0 vias.
It is built around the TL072. Its parts include 23 resistors, 9 capacitors, 4 connectors, 2 ICs and 2 diodes. It belongs with the audio and music boards of this library.
Main components
1README
README.mdMixor Image
Modular Maculata 'Mixor Image' Eurorack Module.
6 input, 2 output minimal panning mixer in 12hp. Designed for Intellijel 1U format. 100% through-hole parts for maximum DIY-Friendliness :)
Mixor Image is built upon the bones of Nearness designed by Jesper Särnesjö. Nearness is a product of the llllllll community.
Changes
- This module has been re-designed to suit the Intellijel 1U format behind a 12hp panel, and be made with entirely through-hole components
- Resistor values have been changed throughout to give a different stereo image (An automated method was used for this to select nearest common resistor values based on angle of placement in the stereo field for each input)
- An additional centre input with a high pass filter has been added so as not to muddy the middle of the stereo field
- Stereo in & out link connectors have been added allowing for chaining of multiple modules or linking to other manufacturers' stereo modules without patch cables
PCB & Panel
KiCad files are provided for the 2 PCB's and a plain panel without artwork.
Gerber files can be found in the Gerbers directory.
The BOM can be found in the Build Guide document.
License
In accordance with the wishes of the designer of the work that inspired this, and in the spirit of community development, this work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Parts
83| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R14, R15, R16, R17, R18, R19, R20, R21 |
| 8 | AudioJack2_SwitchT | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | CEN1, CEN2, L_IN2, L-IN1, L-O1, R-IN1, R-IN2, R-O1 |
| 4 | 100nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C6, C7, C8, C9 |
| 4 | 110K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6, R7, R8, R9 |
| 2 | 102K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R13 |
| 2 | 113K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4, R11 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R22, R23 |
| 2 | 1N5819 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2 |
| 2 | 220K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5, R10 |
| 2 | 22pF | Capacitor_THT:C_Disc_D4.0mm_W1.6mm_P3.0mm | C2, C3 |
| 2 | 22uF | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C4, C5 |
| 2 | 620K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R12 |
| 2 | Conn_01x03_Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J2, J4 |
| 2 | Conn_01x03_Male | Connector:FanPinHeader_1x03_P2.54mm_Vertical | ST-IN1, ST-OUT1 |
| 2 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J3 |
| 2 | LOGO | Nearness 1U:maculata_logo_copper | G***, G*** |
| 2 | LOGO | Nearness 1U:maculata_leaf_silk | G***, G*** |
| 2 | TL072 | Package_DIP:DIP-8_W7.62mm_Socket | U1, U2 |
| 1 | 180K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 5.6nF | Capacitor_THT:C_Rect_L4.0mm_W2.0mm_P4.00mm | C1 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | PWR1 |
The 55 most common of 83 parts.
Questions
How big is the Mixor Image v5 PCB?
It measures 60.6 × 46 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mixor Image v5 use?
83 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mixor Image v5 KiCad files?
From the modular-maculata/mixor-image repository on GitHub, at the commit this page was made from: the board is KiCad Files/Mixor-Image-v5.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mixor Image v5 design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers39.6 × 99.1 mm
ESP32-Eurorack Audio
ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module
128 parts260 - 4 layers121.9 × 109.2 mm
Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw
300 parts227 - 2 layers58 × 110 mm
- 2 layers37 × 113.9 mm
- 2 layers111.3 × 106.4 mm
Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171 - 2 layers27.9 × 101.6 mm
MFOS Eight Stage Phase Shifter - Main
mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules
105 parts166MIT - 2 layers85.1 × 62.2 mm
Mic extension board
StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms
75 parts146