
Tiny solar supply
Mo-Kara/kicad-learning-projects
KiCad practice boards recreated from public tutorials while learning PCB design

KiCad practice boards recreated from public tutorials while learning PCB design
Bridge rectifier is an open-source printed circuit board by Mo-Kara, from the Mo-Kara/kicad-learning-projects repository on GitHub. It is a 2-layer board of 50 × 33.5 mm with 10 parts on 5 nets, routed with 29 tracks and 0 vias.
Its parts include 5 diodes, 2 resistors, 2 connectors and 1 capacitor. It belongs with the interfaces and adapters boards of this library.
Practice boards I recreated in KiCad while learning schematic capture, footprints, PCB layout and fabrication output. These are learning projects: the designs were reproduced from public tutorials and open designs, not original work. The goal was to practise the workflow and to understand each circuit, not to claim the designs.
tiny-solar-supply)Solar-powered 3.3 V boost converter built around the AP3015 (output set by the 1 MΩ / 604 kΩ feedback divider), with a 2N7002 switch, SS14 Schottky diodes and SMD parts. I reviewed the layout and noted improvements for a Rev B (switching loop, feedback routing, ground plane, output switch-off).

breadboard-power-supply)LM317 adjustable supply with 3.3 V / 5 V header outputs, power LED, slide switch and screw terminals. Includes Gerber files.

bridge-rectifier)Four 1N4007 diodes, a 1000 µF smoothing capacitor and a 10 kΩ bleeder resistor and an LED indicator (2.2 kΩ) on a through-hole board with screw terminals.

led-torch)CR2032 coin-cell LED light with push button and series resistor. Includes Gerber files.

arduino-nano-board: custom Arduino Nano footprint practice (no complete board yet).mcu-datalogger: early project files for an MCU data logger (not finished)..kicad_pro file in each folder.Mohanad Al-Karajeh, Systems Engineering student, Graz.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1, J2 |
| 1 | 1000u | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | LED | LED_THT:LED_D5.0mm | D5 |

Mo-Kara/kicad-learning-projects
KiCad practice boards recreated from public tutorials while learning PCB design

Mo-Kara/kicad-learning-projects
KiCad practice boards recreated from public tutorials while learning PCB design

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 50 × 33.5 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Mo-Kara/kicad-learning-projects repository on GitHub, at the commit this page was made from: the board is bridge-rectifier/1.kicad_pcb and its schematic arduino-nano-board/arduino_nano.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Mo-Kara before reusing the design.