2 layers93 × 191.5 mm
2 layers100.6 × 207.3 mm
SmartMeter
MNasser-iono/SmartMeter- Size
- 100.6 × 207.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 73
- Pads
- 181
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Jun 2025
- Updated
- 2 Jun 2025
Overview
SmartMeter is an open-source printed circuit board by MNasser-iono, from the MNasser-iono/SmartMeter repository on GitHub. It is a 2-layer board of 100.6 × 207.3 mm with 56 parts on 73 nets.
It is built around the BTA41-600B, HLK-5M12 and MOC3063M, with the 10D561K among its other parts. Its parts include 21 resistors, 9 capacitors, 9 ICs, 7 transistors and 6 connectors.
Main components
4
BTA41-600B
TO-3P-40℃~+125℃ 1 TRIAC 1.3V 1.4V 1W 40A 420A@20ms 50mA 600V 80mA TO-3P Thyristors (SCR)/Modules ROHSKTPThyristors (SCR)/Modules
HLK-5M12
DIP,38x23mm0.1W 12V 18mm 23mm 38mm 3kV 450mA 5W 70% 70V~350V 70mVp-p 85VAC~264VAC AC/DC-DC Short Circuit Protection、Over Current Protection DIP,38x23mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
MOC3063M
DIP-6-40℃~+85℃ 1 1.5V 250mW 30mA 6 600V 600V/us 7.5kV TRIAC Yes DIP-6 Triac, SCR Output Optoisolators ROHSonsemiTriac, SCR Output Optoisolators
10D561K
插件,P=7.5mm180pF@1kHz 2.5kA 350V 460V 504V~616V 70J 925V 插件,P=7.5mm Varistors ROHSSURGINGVaristors
README
README.mdSmartMeter
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R4, R5, R7, R8, R10, R11, R13, R14, R16, R17, R19, R20 |
| 7 | 0.01µF | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P10.00mm | C3, C4, C5, C6, C7, C8, C9 |
| 7 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R6, R9, R12, R15, R18, R21 |
| 7 | BTA41-600 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 7 | MOC3063M | Package_DIP:DIP-6_W7.62mm | U2, U3, U4, U5, U6, U7, U8 |
| 1 | 0.1uF/275V | Capacitor_THT:C_Rect_L18.0mm_W5.0mm_P15.00mm_FKS3_FKP3 | C1 |
| 1 | 10D561 | Varistor:RV_Disc_D15.5mm_W7.5mm_P7.5mm | RV1 |
| 1 | 220uF | Capacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mm | C2 |
| 1 | AC_Input | smart_meter:RPC2 | J5 |
| 1 | Control_Terminal | smart_meter:RC8 | J2 |
| 1 | DC_out | smart_meter:RC2 | J6 |
| 1 | Energy_Meter_Conn | smart_meter:RC4 | J1 |
| 1 | Fuse | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | HLK-5M12 | Converter_ACDC:Converter_ACDC_Hi-Link_HLK-5Mxx | PS1 |
| 1 | L_Coupled_1324 | Inductor_THT:L_CommonMode_Wuerth_WE-CMB-M | L1 |
| 1 | Loads | smart_meter:RPC10 | J3 |
| 1 | PV | smart_meter:RPC2 | J4 |
| 1 | ~ | smart_meter:Energy_meter | U1 |
| 1 | ~ | smart_meter:AC_filter | U9 |
Questions
How big is the SmartMeter PCB?
It measures 100.6 × 207.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SmartMeter use?
56 parts, built around the BTA41-600B, HLK-5M12, MOC3063M and 10D561K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SmartMeter KiCad files?
From the MNasser-iono/SmartMeter repository on GitHub, at the commit this page was made from: the board is smart meter.kicad_pcb and its schematic Control board/Control_board/485_SERIAL.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SmartMeter design in my own project?
Its repository states no licence, so its author keeps all rights: ask MNasser-iono before reusing the design.
Similar boards
- 4 layers102 × 104.8 mm
- 2 layers60 × 75 mm
- 2 layers99.1 × 58.4 mm
HEAT
milar111/HEAT
An open-source STM32 SMD assembly station for precision soldering. Uses a custom Smart Pulse & Coast algorithm to drive 400W mains heaters via SSR. Features OLED UI, NTC feedback, and safety cooling.
57 parts9 - 2 layers56.6 × 85.1 mm
- 2 layers153.9 × 99.6 mm
- 4 layers142 × 90 mm
- 2 layers98.1 × 99.7 mm
