

Various hardware projects
- Size
- 78.2 × 68.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 102
- Nets
- 129
- Pads
- 470
- Tracks, vias
- 1,803, 106
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 28 Feb 2021
- Updated
- 9 Jun 2017
Overview
Lyre is an open-source printed circuit board by mmiscool, from the mmiscool/bobc_hardware repository on GitHub. It is a 2-layer board of 78.2 × 68.8 mm with 102 parts on 129 nets, routed with 1,803 tracks and 106 vias.
It is built around the BSS84. Its parts include 36 resistors, 34 capacitors, 9 connectors, 7 diodes and 6 ICs. It belongs with the STM32 boards of this library.
Main components
1README
README.mdHardware projects
RAMPS-FD
RAMPS-FD v2.1 design is frozen and will be updated for minor changes only.
RAMPS-FD is licensed with GPL v3.
Thanks go to Cefiar for help with this project.
History:
V2.1 - Fix problem with unconnected analog reference.
Known issues:
- third party add-on boards designed for 5V operation (e.g. LCD control panels) may not work reliably due to level conversion problems. It is recommended to only use add-on boards that are designed for 3.3V operation with RAMPS-FD.
V2.A - Rework design to remove any possibility of heaters and fans turning on when not wanted.
Several other improvements, e.g. addition of EEPROM.
Known issues:
- AREF is unconnected, so thermistor inputs do not work. This can be fixed by connecting AREF to 3.3V.
- incorrect thermistor readings. The ADC protection cicuit interferes with readings. This can be fixed by removing ADC proteection components.
Some people are selling boards at this version, but it is not recommended for use.
V1.A - Withdrawn. It is not recommended to continue using this version
Known issues:
- V1 has serious problem of heaters turning on if power to Due is lost while 12V power is applied.
Control Panel
A Control Panel for RepRap printers, based on Makerbot Control Panel.
MicropendousX-1343
A Mini CPU Module for NXP LPC1343 based on MicropendousX-1343.
Parts
102| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | SM0603_Capa | C5, C6, C7, C8, C9, C10, C12, C14, C23, C24, C25, C26, C29 |
| 9 | 0 | SM0603_Resistor | R1, R2, R3, R4, R5, R6, R10, R34, R35 |
| 5 | 10u | SM0603_Capa | C19, C21, C22, C30, C34 |
| 5 | 1u | SM0603_Capa | C13, C15, C16, C20, C33 |
| 4 | 100k | SM0603_Resistor | R8, R22, R24, R25 |
| 4 | 10k | SM0603_Resistor | R23, R28, R38, VR1 |
| 3 | 2u2 | SM0603_Capa | C1, C2, C37 |
| 3 | DIODE | do219ab | D3, D6, D7 |
| 2 | 0R | SM0603_Resistor | R36, R37 |
| 2 | 20pF | SM0603_Capa | C3, C4 |
| 2 | 22 | SM0603_Resistor | R11, R12 |
| 2 | 220u | c_tant_B | C27, C28 |
| 2 | 470 | SM0603_Resistor | R14, R19 |
| 2 | 470p | SM0603_Capa | C31, C32 |
| 2 | 47k | SM0603_Resistor | R26, R27 |
| 2 | 4k7 | SM0603_Resistor | R20, R21 |
| 2 | 4u7 | SM0603_Capa | C11, C36 |
| 2 | 510 | SM0603_Resistor | R9, R17 |
| 2 | INDUCTOR_SMALL | SM0805 | L2, L3 |
| 1 | 1.87k | SM0603_Resistor | R29 |
| 1 | 12V_IN | JACK_PWR | P14 |
| 1 | 2.05M | SM0603_Resistor | R30 |
| 1 | 220 | SM0603_Resistor | R7 |
| 1 | 220k | SM0603_Resistor | R15 |
| 1 | 330 | SM0603_Resistor | R13 |
| 1 | 649k | SM0603_Resistor | R31 |
| 1 | 680 | SM0603_Resistor | R18 |
| 1 | 8MHz | XTAL-3.2x2.5mm | X1 |
| 1 | ARDUINO_HEADER | arduino_header_bare | J1 |
| 1 | BSS84 | SOT23GDS | Q1 |
| 1 | Battery | BATTery_Molex_53047-0310 | P7 |
| 1 | CHRG | Led_0603 | D8 |
| 1 | CONN_CORTEX_DEBUG | Pin_Array_5x2_1.27mm_RMC | P8 |
| 1 | CONN_SD | Memory_Card_SD_3M | P13 |
| 1 | FRAM 2KB | so-8 | U8 |
| 1 | Hammond_PCB | pcb_hammond_1553bbat | M2 |
| 1 | LCD_2.4_INCH | pin_socket_20x2 | P10 |
| 1 | LED1 | Led_0603 | D1 |
| 1 | LED2 | Led_0603 | D2 |
| 1 | LOGO_OSHW | OSHW_logo_2 | M1 |
| 1 | LTC3553 | qfn-20-LTC3553 | U7 |
| 1 | L_MINI | SM0805 | L1 |
| 1 | MCP1703_SOT23 | SOT23 | U4 |
| 1 | PWR | Led_0603 | D5 |
| 1 | RESET | SW_C&K_KMR4 | SW2 |
| 1 | STEREO-AUDIO-JACK_SJ1-3524-SMT | SJ-3524-SMT_Stereo_Jack | P11 |
| 1 | STM32F407_LQFP100 | LQFP100_0.5mm_SOT407-1_LPC1768 | U1 |
| 1 | SWD | pin_header_2.54mm_1x4 | P1 |
| 1 | SW_ON | sw_panasonic_evqp7 | SW3 |
| 1 | Traco TSR 1-2450 | Traco_TSR-1 | U2 |
| 1 | USBCONN-HOSTCAPABLE | USB_MICRO_RMC | P9 |
| 1 | USER | SW_C&K_KMR4 | SW1 |
| 1 | WM8731 | soic-28 | U5 |
More from mmiscool/bobc_hardware
3- 2 layers150 × 110 mm

- 2 layers100 × 50 mm

- 2 layers50.8 × 50.8 mm

Similar boards
- 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers44.2 × 29.3 mm

- 2 layers45 × 58.2 mm

- 2 layers98.5 × 59.8 mm

Neuron
giant-axon/lu.i-neuron-pcb
Lu.i is an electronic neuron circuit mimicking and illustrating the basic dynamics of real, biological neurons. The printed circuit board (PCB) features a configurable, fully analog implementation of the leaky…
90 parts73CERN-OHL-S-2.0 - 6 layers100 × 70 mm

Sa800u baseboard hw
antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/
616 parts70Apache-2.0 - 2 layers75 × 40 mm

PicoTop Board Rev2
7west/PicoTop
A very basic computer & OS based on the RP2350 microcontroller
86 parts66 - 4 layers50 × 59 mm

- 6 layers150 × 100 mm

Questions
How big is the Lyre PCB?
It measures 78.2 × 68.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lyre use?
102 parts, built around the BSS84. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lyre KiCad files?
From the mmiscool/bobc_hardware repository on GitHub, at the commit this page was made from: the board is Lyre_reboot/lyre.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lyre design in my own project?
Its repository states no licence, so its author keeps all rights: ask mmiscool before reusing the design.