

Music gadget encoder
A hardware project for a music gadget based on a bunch of LEDs and encoders
- Size
- 96.5 × 49.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 249
- Nets
- 88
- Pads
- 627
- Tracks, vias
- 2,624, 534
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Apr 2019
- Updated
- 24 May 2019
Overview
Music gadget encoder is an open-source printed circuit board by mmagyar, from the mmagyar/music-gadget-encoder repository on GitHub, published under the MIT licence. It is a 2-layer board of 96.5 × 49.9 mm with 249 parts on 88 nets, routed with 2,624 tracks and 534 vias.
It is built around the PEC12R-4225F-S0024. Its parts include 166 diodes, 32 resistors, 20 capacitors, 7 switches and 6 ICs. It belongs with the STM32 boards of this library.
Main components
1README
README.mdMusic gadget base on STM32G070 MCU
Modes of operation
- Step sequencer
- Midi controller
Software
This project is built on a basic STM32Cube generated base, with using LL drivers. TrueSTUDIO for STM32 is used for building and debugging.
Hardware
The schematics and the pcb is designed with KiCad. This is not a pcb that can be easily done at home, but most cheap chinease pcb manufaturers will be able to make them for you. It uses 0805 SMD components, soldering this together is not for beginner.
Picture of the prototype
In step sequencer mode:

Parts
249| Qty | Value | Footprint | References |
|---|---|---|---|
| 160 | LED | footprints:LED_0805_2012Metric_NO_SILKSCREEN | D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112, D113 +144 |
| 20 | 10K | Resistor_SMD:R_0805_2012Metric | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25 +4 |
| 8 | 100n | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4, C16, C17, C18, C19, C20 |
| 8 | 10n | Capacitor_SMD:C_0805_2012Metric | C8, C9, C10, C11, C12, C13, C14, C15 |
| 8 | 1k | Resistor_SMD:R_0805_2012Metric | R4, R5, R6, R28, R29, R30, R31, R32 |
| 7 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1, SW2, SW3, SW4, SW5, SW6, SW7 |
| 6 | DIODE | Diode_SMD:D_0805_2012Metric | D1, D2, D3, D4, D5, D6 |
| 5 | DMG9933USD-13 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q2, Q3, Q4, Q5 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 4 | PEC12R-4225F-S0024 | footprints:ENCODER_PEC12R-4XXXF-SXXXX_1 | U2, U3, U4, U5 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R7 |
| 2 | 18pf | Capacitor_SMD:C_0805_2012Metric | C5, C7 |
| 2 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J_BOTTOM1, J_RIGHT1 |
| 2 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Horizontal | J_LEFT1, J_TOP1 |
| 1 | 100nf | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 390 | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Conn_01x02_Male | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | J6 |
| 1 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J_PROG1 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | R | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | STM32G070CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | TLC5926IPWPR | SamacSys_Parts:SOP65P640X120-25N | IC1 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
The 248 most common of 249 parts.
Similar boards
- 4 layers133.4 × 44.3 mm

- 2 layers100.1 × 121.4 mm

Panel
da-penguin-guy/Proteus
The Proteus is a modular collection of PCBs that will be used to develop the Virgil sound Protocol
137 parts3 - 2 layers65 × 65 mm

Esp butt
jsmnbom/esp-butt
A physical controller for intimate devices. No phone. No app. Just knobs, sliders, and hundreds of compatible toys.
18 parts1 - 2 layers77.5 × 50.8 mm

- 2 layers76.2 × 34.3 mm

BrentsController
ahkneipp/LightDriver
Control system for a strip of WS2811 LEDs; Quick and dirty
27 parts - 2 layers127.2 × 117 mm

- 2 layers260.4 × 118.7 mm

- 2 layers59.4 × 71.6 mm

Macro devboard quarq
YingK8/ESP32-BLE-Macro-Pad
A compact, programmable macropad with Bluetooth connectivity, featuring 6 mechanical keys and a rotary encoder for media control.
58 parts
Questions
How big is the Music gadget encoder PCB?
It measures 96.5 × 49.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Music gadget encoder use?
249 parts, built around the PEC12R-4225F-S0024. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Music gadget encoder KiCad files?
From the mmagyar/music-gadget-encoder repository on GitHub, at the commit this page was made from: the board is schematics/music_gadget_encoder.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Music gadget encoder design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).