mlab-modules/TEMPSEN01Temperature sensor MAX31725 (16bit, I2C) intended for the use in connection with PX4 autopilot.
TEMPSEN01 is an open-source printed circuit board by mlab-modules, from the mlab-modules/TEMPSEN01 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 30 × 19.8 mm with 20 parts on 11 nets, routed with 113 tracks and 26 vias.
It is built around the MAX31725MTA+T, SM04B-GHS-TB and BZV55C5V6. Its parts include 3 resistors, 2 capacitors, 2 ICs, 2 connectors and 1 diode.
MLAB's module template repository. Please use the "Use this template" button to create a new MLAB module from this repository.
The new module repository name must be identical to the proposed new module name. Please look in MLAB design rules for an acceptable naming convention. After creating the new repository, rename the default git branch to be named corresponding to the revision of the module. It is generally adding the "A" suffix to the module name. Therefore, a new repository named MODULENAME01 should have the branch name MODULENAME01A.
Then clone the new MLAB's module repository to your workstation. After that perform the following steps in the cloned repository.
git submodule update --init --remoteAt that point, you should start to design the new MLAB module project by using the design tools.
The following command copies up-to-date KiCAD automation workflow to the new MLAB module repository.
cd doc/assets/workflows/
./copy_workflow_to_repo.shThis readme should be replaced by a description of your new module project! :) Please look to the README.md in the root of other modules to get inspiration.
Thanks for contributing!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | HOLE | Mlab_Mechanical:MountingHole_3mm | M1, M2, M3, M4 |
| 4 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2 |
| 2 | SM04B-GHS-TB | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J1, J2 |
| 1 | BZV55C5V6 | Diode_SMD:D_SOD-123F | D1 |
| 1 | MAX31725MTA+T | KiCad:SON65P300X300X80-9N | IC1 |
| 1 | NCP715SQ33T2G | ncp:SOT65P210X110-5N | IC2 |
It measures 30 × 19.8 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the MAX31725MTA+T, SM04B-GHS-TB and BZV55C5V6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mlab-modules/TEMPSEN01 repository on GitHub, at the commit this page was made from: the board is hw/sch_pcb/TEMPSEN01.kicad_pcb and its schematic hw/sch_pcb/TEMPSEN01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
mawson-rovers/hestia
Hestia is a space-ready heater & temperature measurement system developed by Mawson Rovers in Sydney. Its first mission will demonstrate a novel UTS heatsink design, aboard the Waratah Seed cubesat mission.
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
ThunderFly-aerospace/TFHT01
Airborne Humidity and Temperature sensor for UAVs.
ThunderFly-aerospace/TFI2CADT01
I2C address translator module, allows connection of multiple I2C devices with the same address to one bus.
ThunderFly-aerospace/TFRPM01
Revolutions per minute (RPM) meter for UAV, rotors, wheels and engines.
ThunderFly-aerospace/TFI2CEXT01
I2C bus wire length extension module. Enabling the use of more extensive bus interconnection.