mlab-modules/CLKGEN02The module comprises a plurality of housings for mounting a variety of crystal oscillators.
CLKGEN02 is an open-source printed circuit board by mlab-modules, from the mlab-modules/CLKGEN02 repository on GitHub. It is a 2-layer board of 19.8 × 40.1 mm with 21 parts on 4 nets, routed with 71 tracks and 5 vias.
It is built around the BZV55C12. Its parts include 8 crystals, 3 capacitors, 3 connectors, 2 resistors and 1 diode. It belongs with the radio and wireless and lEDs and displays boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | HOLE | Mlab_Mechanical:MountingHole_3mm | M1, M2, M3, M4 |
| 2 | JUMP_3X2 | Mlab_Pin_Headers:Straight_2x03 | J1, J3 |
| 2 | R | Mlab_R:SMD-0805 | R1, R2 |
| 1 | 100nF | Mlab_R:SMD-0805 | C2 |
| 1 | 10nF | Mlab_R:SMD-0805 | C1 |
| 1 | 10uF | Mlab_R:SMD-0805 | C3 |
| 1 | ASFL1, ASFLK | Mlab_XTAL:ASFL1 | X1 |
| 1 | BZV55C | Mlab_D:Diode-MiniMELF_Standard | D1 |
| 1 | CFPS-72,CFPS-73 | Mlab_XTAL:CFPS-72,73 | X2 |
| 1 | I533_I534_I733_I734_Series | Mlab_XTAL:I533_1534_1733_1734 | X6 |
| 1 | ISM81 | Mlab_XTAL:ISM81 | X7 |
| 1 | ISM92 | Mlab_XTAL:ISM92 | X3 |
| 1 | ISM95 | Mlab_XTAL:ISM95 | X8 |
| 1 | ISM97 | Mlab_XTAL:ISM97 | X4 |
| 1 | JUMP_2x1 | Mlab_Pin_Headers:Straight_1x02 | J2 |
| 1 | OSC-F | Mlab_XTAL:OSC-F | X9 |
It measures 19.8 × 40.1 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the BZV55C12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mlab-modules/CLKGEN02 repository on GitHub, at the commit this page was made from: the board is hw/sch_pcb/CLKGEN02.kicad_pcb and its schematic hw/sch_pcb/CLKGEN02.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mlab-modules before reusing the design.
haarishkumarsundarapandian18-sketch/Battery_management-_system
Developed a complete CubeSat BMS from battery selection to hardware validation. Designed the battery model and SoC estimation in MATLAB/Simulink, then implemented cell voltage, current, temperature monitoring and fault…
Queens-Rocket-Engineering-Team/av-power
QRET Avionics PCBs and firmware for delivering power to SRAD PCBs
nikolajevs/PCB_EU
Сохраняются функции PCBV1: два LED-канала с общей яркостью, два независимых PWM/тахоканала вентиляторов, PTC, помпа, SHT4x, поплавок, RTC с CR2032, microSD, Wi-Fi и существующие функции интерфейса/расписаний.
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
