Skip to the content
2 layers34 × 105 mmVC Switch Doepfer A-150, the printed circuit board in 3D

VC Switch Doepfer A-150

mkfarrow/Eurorack_Dual-VCS3

CAD files for the PCB and panel for a Eurorack synth module based on the Doepfer A-150

Size
34 × 105 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
31
Pads
114
Tracks, vias
102, 0
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
10 Jun 2022
Updated
24 Feb 2023

Overview

VC Switch Doepfer A-150 is an open-source printed circuit board by mkfarrow, from the mkfarrow/Eurorack_Dual-VCS repository on GitHub. It is a 2-layer board of 34 × 105 mm with 31 parts on 31 nets, routed with 102 tracks and 0 vias.

It is built around the DG409DJZ. Its parts include 10 resistors, 9 connectors, 6 diodes, 4 capacitors and 2 ICs. It belongs with the audio and music boards of this library.

Main components

1

README

README.md

Eurorack_Dual-VCS

schematic

Parts

31
QtyValueFootprintReferences
81kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R3, R4, R5, R6, R8, R9, R10
4LEDLED_THT:LED_D3.0mmD2, D3, D5, D6
2100kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R7
2100nCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC3, C4
210uCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC1, C2
2CV inMouser_Components:CL1384J1, J6
2DDiode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D4
2DG409DJMouser_Components:DIP794W56P254L1917H533Q16NIC1, IC2
2I/O1Mouser_Components:CL1384J2, J7
2I/O2Mouser_Components:CL1384J3, J8
2O/IMouser_Components:CL1384J4, J9
1EURO_PWR_2x5Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ5

Similar boards

  • 2 layers44.5 × 46.9 mmOSO SWAT B1-jig, the printed circuit board in 3D

    OSO SWAT B1-jig

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    31 parts2.1k
  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    31 parts1kGPL-3.0
  • 2 layers191 × 98.5 mmMacroKeypad, the printed circuit board in 3D

    MacroKeypad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    31 parts915
  • 2 layers39 × 45.2 mmCH32V003F4P6-R0-1v1, the printed circuit board in 3D

    CH32V003F4P6-R0-1v1

    openwch/ch32v003

    CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

    31 parts599
  • 2 layers26.7 × 27.9 mmBreakout board, the printed circuit board in 3D

    Breakout board

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    31 parts546MIT
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    31 parts447MIT
  • 2 layers77.2 × 69.8 mmCubesatsim solar, the printed circuit board in 3D

    Cubesatsim solar

    alanbjohnston/CubeSatSim

    CubeSatSim, the AMSAT CubeSat Simulator

    31 parts419GPL-3.0
  • 2 layers103 × 55 mmTd neck-294, the printed circuit board in 3D

    Td neck-294

    tdaede/td-crt

    tubes

    31 parts373

Questions

How big is the VC Switch Doepfer A-150 PCB?

It measures 34 × 105 mm and has 2 copper layers, 1.6 mm thick.

What parts does the VC Switch Doepfer A-150 use?

31 parts, built around the DG409DJZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the VC Switch Doepfer A-150 KiCad files?

From the mkfarrow/Eurorack_Dual-VCS repository on GitHub, at the commit this page was made from: the board is pcb_kicad/VC-Switch-Doepfer-A-150.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the VC Switch Doepfer A-150 design in my own project?

Its repository states no licence, so its author keeps all rights: ask mkfarrow before reusing the design.