Skip to the content
2 layers67.1 × 95.4 mmStarbie pet, the printed circuit board in 3D

A small digital pet that lives inside a cat-shaped case. It shows a pet on a screen and reacts when you move it, press it's buttons or touch it.

Size
67.1 × 95.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
37
Pads
80
Tracks, vias
155, 3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
5 Oct 2026
Updated
27 Oct 2026

Overview

Starbie pet is an open-source printed circuit board by miyakostarry, from the miyakostarry/petstarbie repository on GitHub. It is a 2-layer board of 67.1 × 95.4 mm with 21 parts on 37 nets, routed with 155 tracks and 3 vias.

Its parts include 2 resistors and 2 switches.

README

README.md

CATBIE (STARBIE)

A small digital pet that lives inside a cat-shaped case. It shows a pet on a screen and reacts when you move it, press it's buttons or touch it.

How it works╰(°▽°)╯

An ESP32 board is the brain, It runs the pet program. A screen shows the pet. A gyro sensor feels when you tilt or shake the cat. Two buttons and a touch pad let you interact with it. A temperature sensor lets the pet react to the room. A rechargeable battery powers it. A charger module charges it over USB, and a power switch turns it on and off.

All the parts plug into sockets on a cat-shaped PCB (designed in KiCad). The board sits inside a 3D-printed cat shell.

Parts (≧∀≦)ゞ

  • ESP32 DevKit V1 (30-pin)
  • 1.8" ST7735 SPI TFT display
  • MPU6050 (GY-521) gyro
  • DHT11 module
  • 2 tactile push buttons
  • 2 resistors, 100 kΩ
  • JST-PH battery connector
  • 3.7 V LiPo battery
  • TP4056 charger module
  • MT3608 boost converter

Bill of Materials (BOM) (。•̀ᴗ-)✧

Here's the list of components used for CATBIE, along with their estimated prices and suppliers. Prices may vary depending on availability and shipping.

ComponentQuantitySupplierCost per Item (USD)Total Cost (USD)Link
ESP32 DevKit V1 (30-pin)1Amazon India$5.60$5.60View product
MPU6050 (GY-521)1Amazon India$3.40$3.40View product
1.8" ST7735 SPI TFT Display1Robu.in$3.50$3.50View product
DHT11 Temperature and Humidity Sensor Module1Robu.in$0.56$0.56View product
Tactile Push Button1Robu.in$0.25$0.25View product
100 kΩ Resistor2Robu.in$0.20$0.40View product
3.7 V, 500 mAh LiPo Battery with JST-PH1Amazon India$3.00 (estimated)$3.00Search products
TP4056 USB-C Charger Module with Protection1Amazon India$1.00$1.00View product
MT3608 Boost Converter1Amazon India$1.40$1.40View product
Custom PCB1JLCPCB$5.20 (estimated)$5.20JLCPCB
Estimated Shipping1 shipmentJLCPCB—$9.83—

Estimated Project Cost

CategoryEstimated Cost (USD)
Electronic components$19.11
Custom PCB$5.20
Estimated shipping$9.83
Estimated Total$34.14

Note: These are estimated prices, not a confirmed final bill. Shipping, taxes, customs charges, and component prices may change. The battery price is approximate because different sellers offer different options.

AI help is taken to understand how connections and components work and also help taken from people in how to use kiCAD and one of my friend helped me picking up the components to use so yeah he helped alot another thing i want to add that my friend created the structure shell for my catbie/neckobie in blender but i'm having trouble opening the fbx file in blender so i couldn't post the image of it

image Screenshot 2026-10-11 183441 Screenshot 2026-10-11 181348

Parts

21
QtyValueFootprintReferences
2Conn_01x02_SocketConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalInput1, Out1
2Conn_01x08_SocketConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Verticaldisplay1, GyroMPU6050
2Conn_01x15_SocketConnector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Verticalespleft1, espright1
2LOGOLOGOG***, G***
2RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR1batlvl1, R2batlvl1
2SW_PushButton_Switch_THT:SW_PUSH_6mmSW1, SW2
1Conn_01x01TestPoint:TestPoint_Pad_D4.0mmtouchpad1
1Conn_01x02_SocketConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Verticalbattery2
1Conn_01x03_SocketConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalDHT11temp1
1Conn_01x04_SocketConnector:FanPinHeader_1x04_P2.54mm_Verticalcharging1
1SW_SPSTConnector:FanPinHeader_1x03_P2.54mm_VerticalPowerswitch1

The 17 most common of 21 parts.

More from miyakostarry/petstarbie

1
  • 2 layersStarbie pet, the printed circuit board in 3D

    Starbie pet

    miyakostarry/petstarbie

    A small digital pet that lives inside a cat-shaped case. It shows a pet on a screen and reacts when you move it, press it's buttons or touch it.

    11 parts

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the Starbie pet PCB?

It measures 67.1 × 95.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Starbie pet use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Starbie pet KiCad files?

From the miyakostarry/petstarbie repository on GitHub, at the commit this page was made from: the board is hardware/starbie_pet/starbie_pet.kicad_pcb and its schematic hardware/starbie_pet/_restore_backup_2026-10-09T16-45-34-137/starbie_pet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Starbie pet design in my own project?

Its repository states no licence, so its author keeps all rights: ask miyakostarry before reusing the design.