
Flipdot
mitxela/flipdots
KiCad designs and software for driving Hanover flipdot displays with a resolution of 13 by 28, as used in the FLIP fluid on Flipdots project

KiCad designs and software for driving Hanover flipdot displays with a resolution of 13 by 28, as used in the FLIP fluid on Flipdots project
Flipdot is an open-source printed circuit board by mitxela, from the mitxela/flipdots repository on GitHub. It is a 2-layer board of 60.4 × 197.5 mm with 262 parts on 332 nets, routed with 3,063 tracks and 686 vias.
It is built around the 74HC595 and FDN338P. Its parts include 121 capacitors, 66 ICs, 52 inductors, 8 connectors and 1 resistor.
KiCad designs and software for driving Hanover flipdot displays with a resolution of 13 by 28, as used in the FLIP fluid on Flipdots project
drivers-full are the main driver panels doing 13x8drivers-half are truncated to 13x4 for the enddecode are boards with a ch32v003 to drive the shift registersdecode-sw is firmware for the ch32, plus python scripts to show test patterns and video via a USB-RS485 adapter| Qty | Value | Footprint | References |
|---|---|---|---|
| 65 | 10u | Capacitor_SMD:C_0805_2012Metric | C12, C13, C14, C15, C107, C112, C113, C114, C115, C132, C137, C138, C139, C140, C157, C162 +49 |
| 56 | 47u | Flipdot:CP_Elec_5x5.4_slim | C1, C10, C11, C100, C101, C110, C111, C125, C126, C135, C136, C150, C151, C160, C161, C175 +40 |
| 52 | ~ | Flipdot:Flipdot_single | L1, L2, L3, L10, L11, L12, L17, L18, L19, L20, L25, L26, L27, L28, L33, L100 +36 |
| 52 | ~ | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U1, U2, U10, U11, U12, U13, U19, U20, U100, U101, U102, U103, U109, U110, U111, U112 +36 |
| 13 | 74HC595 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U5, U14, U23, U32, U41, U50, U59, U68, U77, U86, U95, U104, U113 |
| 9 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H5, H7, H9, H13, H17, H19, H21, H25 |
| 8 | Conn_01x02_Pin | Connector_JST:JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J10, J14, J18, J25, J34, J38, J41, J50 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | CLK | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | FDN338P | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | IN | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | Megain MG6208T3-33 | Package_TO_SOT_SMD:SOT-23 | U118 |
| 1 | OE* | TestPoint:TestPoint_Pad_D1.5mm | TP5 |
| 1 | VCC | TestPoint:TestPoint_Pad_D1.5mm | TP7 |

mitxela/flipdots
KiCad designs and software for driving Hanover flipdot displays with a resolution of 13 by 28, as used in the FLIP fluid on Flipdots project

mitxela/flipdots
KiCad designs and software for driving Hanover flipdot displays with a resolution of 13 by 28, as used in the FLIP fluid on Flipdots project

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

d-diot/Mini-BT-Pcb-328P
MySensors ATMega328P + RFM69 and NRF24 battery (AAA and CR2032) powered pcb

d-diot/ESP8266-LolinV3-Lamp
A pcb for the NodeMCU Lolin V3 board with power management for a WS2812 LED strip


Many3Stars/Another-IoT-network-for-monitoring-forests
Author: Manuel Álvarez Herrera Supervisor: José Antonio García Souto Year: 2024

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
It measures 60.4 × 197.5 mm and has 2 copper layers, 0.8 mm thick.
262 parts, built around the 74HC595 and FDN338P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mitxela/flipdots repository on GitHub, at the commit this page was made from: the board is drivers-half/flipdot.kicad_pcb and its schematic decode/flipdot-decode.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mitxela before reusing the design.