

T20 pmod
Custom board designs for MiSTle projects
- Size
- 53.6 × 71.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 71
- Pads
- 172
- Tracks, vias
- 133, 7
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 Aug 2025
- Updated
- 21 Oct 2026
Overview
T20 pmod is an open-source printed circuit board by MiSTle-Dev, from the MiSTle-Dev/Boards repository on GitHub. It is a 2-layer board of 53.6 × 71.4 mm with 16 parts on 71 nets, routed with 133 tracks and 7 vias.
Its parts include 6 resistors, 6 connectors, 2 capacitors and 1 IC. It belongs with the RP2040 boards of this library.
README
misteryshield20k/README.mdMiSTeryNano MIDI shield for Tang Nano 20k

This is a base board for the Tang Nano 20K and optionally the M0S Dock. It features:
- Headers to plug the Tang Nano 20K
- A seperate USB power supply (old variant only)
- Used if the Tang Nano 20K is being used as a USB host itself
- Can be broken off to make room for a M0S Dock
- M0S Dock connector
- Atari style joystick
- Supports two buttons
- Including 5V supply and 5V level shifters
- Works with DB9 joystcks and mice
- MIDI
- MIDI OUT with driver chip to protect Tang Nano 20K
- MIDI IN with optocoupler to protect Tang Nano 20K
PCBA production files for JLCPCB are availble here.
Variants
There are now two variants of the board:
-
The original variant including a small PCB breakout with a USB-C connector. This variant could theoretically be used without M0S Dock. But in fact the M0S Dock is currently needed by many cores and the USB-C part needs to be cut off to make space for the M0S Dock. However, it turned out that some people damage the PCB in the process of cutting this part off. That's why the second M0S variant now exists.
-
The M0S variant does not include the USB-C part and can only be used in conjunction with a M0S Dock. This is the preferred version as nothing has to be cut to use it. However, this variant has not been tested, yet. No problems are expected, but please report back if you successfully order and use one of these.

The part carrying the USB connector can be cut away making room for a M0S Dock which will then also be used to provide power to the Tang Nano 20K.

Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 22 | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 10µF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | BANK 1B_1C | Connector_PinSocket_2.54mm:PinSocket_2x18_P2.54mm_Vertical | J1 |
| 1 | MountingHole | MountingHole:MountingHole_3mm | H1 |
| 1 | PMOD HDMI | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Horizontal | J2 |
| 1 | PWR | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | SD card | Connector_PinHeader_2.00mm:PinHeader_1x09_P2.00mm_Vertical | J3 |
| 1 | USB Breakout | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | serial | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
More from MiSTle-Dev/Boards
12- 2 layers90 × 67 mm

- 2 layers110 × 67 mm

- 2 layers222.3 × 63 mm

- 2 layers42.8 × 81.8 mm

- 2 layers100 × 57 mm

Misteryshield20k rpipico dual db9-rounded
MiSTle-Dev/Boards
Custom board designs for MiSTle projects
78 parts23 - 2 layers100 × 57 mm

- 2 layers22.6 × 54 mm

- 2 layers57 × 57 mm

- 2 layers57 × 57 mm

- 2 layers37.9 × 35.2 mm

- 2 layers61.4 × 23 mm

- 2 layers17.4 × 55.1 mm

Similar boards
- 2 layers140.5 × 30 mm

Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
16 parts3kApache-2.0 - 2 layers41.4 × 14.5 mm

U2f zero
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
16 parts2.4k - 2 layers77.5 × 33.7 mm

Breakout 72pin 1123038-2-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
16 parts1.2k - 2 layers122 × 37 mm

V0-UmbilicalBoard
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
16 parts1.1kGPL-3.0 - 2 layers152 × 57.6 mm

Videoslotadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
16 parts1kGPL-3.0 - 2 layers36 × 63.4 mm

Smart ringfinal layout
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
16 parts915 - 2 layers60 × 40 mm

- 2 layers21.1 × 26.9 mm

Questions
How big is the T20 pmod PCB?
It measures 53.6 × 71.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the T20 pmod use?
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the T20 pmod KiCad files?
From the MiSTle-Dev/Boards repository on GitHub, at the commit this page was made from: the board is t20_pmod/t20_pmod.kicad_pcb and its schematic atarist_keyboard/pcb/keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the T20 pmod design in my own project?
Its repository states no licence, so its author keeps all rights: ask MiSTle-Dev before reusing the design.