2 layers129.5 × 59.5 mm
Vb controller pcb
misteraddons/Reflex-CTRL
Update Firmware: Select + Start + Up + Plug in USB | Mode | Button Combo | | --- | --- | | Nintendo Switch Mode | B + Plug in USB | | Xinput | A + Plug in USB |
58 parts19
2 layers126.8 × 54.7 mm
Snes controller pcb
misteraddons/Reflex-CTRL19Update Firmware: Select + Start + Up + Plug in USB | Mode | Button Combo | | --- | --- | | Nintendo Switch Mode | B + Plug in USB | | Xinput | A + Plug in USB |
- Size
- 126.8 × 54.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 57
- Pads
- 401
- Tracks, vias
- 501, 409
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 21 Jul 2023
- Updated
- 17 Oct 2026
Overview
Snes controller pcb is an open-source printed circuit board by misteraddons, from the misteraddons/Reflex-CTRL repository on GitHub. It is a 2-layer board of 126.8 × 54.7 mm with 67 parts on 57 nets, routed with 501 tracks and 409 vias.
It is built around the RP2040, 74AHC1G32GW and AMS1117-3.3. Its parts include 15 capacitors, 8 resistors, 8 switches, 7 ICs and 2 diodes. It belongs with the retro computing and games boards and the RP2040 boards of this library.
Main components
3
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
74AHC1G32GW
SOT-353-40℃~+125℃ 1 1.5V~3.85V 1.9V、2.9V、3.94V、4.4V 100mV、100mV、100mV、550mV 1uA 2 2V~5.5V 500mV~1.65V 7.5ns@5V,50pF 74AHC Series 8mA 8mA OR Gate Overvoltage-tolerant input SOT-353 Logic Gates ROHSNexperiaLogic Gates
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdGeneral
A series of drop in replacement circuit boards to convert console controllers directly to USB. Reflex CTRL uses GP2040-CE firmware, and boasts an incredibly low 0.8ms latency.
Controllers
Config
Web Config mode = Start + Plug in USB, then visit 192.168.7.1
CTRL NES
Update Firmware: Select + Start + Up + Plug in USB
| Mode | Button Combo |
|---|---|
| Nintendo Switch Mode | B + Plug in USB |
| Xinput | A + Plug in USB |
| Shortcut | Button Combo |
|---|---|
| D-pad mode | Select + Start + Down |
| Left analog stick mode | Select + Start + Left |
| Right analog stick mode | Select + Start + Right |
| Home | Select + Start + Up |
CTRL SNES
Update Firmware: Select + Start + Up + Plug in USB
| Mode | Button Combo |
|---|---|
| Nintendo Switch Mode | B + Plug in USB |
| Xinput | A + Plug in USB |
| DirectInput / PS3 | Y + Plug in USB |
| PS4 | X + Plug in USB* |
- PS4 mode requires additional steps. Enter
Web Configmode, then go toSettings>Input Mode Settings>PS4>Authentication Mode Settingsfor more info.
| Shortcut | Button Combo |
|---|---|
| D-pad mode | Select + Start + Down |
| Left analog stick mode | Select + Start + Left |
| Right analog stick mode | Select + Start + Right |
| Home | Select + Start + Up |
| Turbo enable/disable | Left + Select + Button |
| Turbo rate increase | Left + Up + Select |
| Turbo rate decrease | Left + Down + Select |
Turbo works on B, A, Y, X, L and R. The rate starts at 10 shots per second (range 2-30) and is saved; turbo button choices reset when the controller is unplugged.
CTRL Virtual Boy
Update Firmware: Select + Start + Up + Plug in USB
| Mode | Button Combo |
|---|---|
| Nintendo Switch Mode | Right DPad Down + Plug in USB |
| Xinput | Right DPad Right + Plug in USB |
| DirectInput / PS3 | Right DPad Left + Plug in USB |
| PS4 | Right DPad Up + Plug in USB* |
| Keyboard | R + Plug in USB* |
- PS4 mode requires additional steps. Enter
Web Configmode, then go toSettings>Input Mode Settings>PS4>Authentication Mode Settingsfor more info.
| Shortcut | Button Combo |
|---|---|
| D-pad mode | Select + Start + Down |
| Left analog stick mode | Select + Start + Left |
| Right analog stick mode | Select + Start + Right |
| Home | Select + Start + Up |
CTRL Genesis 6
Update Firmware: Mode + Start + Up + Plug in USB
| Mode | Button Combo |
|---|---|
| Nintendo Switch Mode | A + Plug in USB |
| Xinput | B + Plug in USB |
| DirectInput / PS3 | X + Plug in USB |
| PS4 | Y + Plug in USB* |
| Keyboard | C + Plug in USB |
- PS4 mode requires additional steps. Enter
Web Configmode, then go toSettings>Input Mode Settings>PS4>Authentication Mode Settingsfor more info.
| Shortcut | Button Combo |
|---|---|
| D-pad mode | Mode + Start + Down |
| Left analog stick mode | Mode + Start + Left |
| Right analog stick mode | Mode + Start + Right |
| Home | Mode + Start + Up |
CTRL Saturn
Update Firmware: Start + Plug in USB to enter Web Config. Navigate to 192.168.7.1. Click Reboot, then USB (BOOT SEL).
| Mode | Button Combo |
|---|---|
| Nintendo Switch Mode | A + Plug in USB |
| Xinput | B + Plug in USB |
| DirectInput / PS3 | X + Plug in USB |
| PS5 | Y + Plug in USB (Requires authentication dongle) |
| Xbox One | C + Plug in USB (Requires authentication dongle) |
| Keyboard | R + Plug in USB |
- Xbox authentication requires an authentication dongle (TBD)
| Shortcut | Button Combo |
|---|---|
| D-pad mode | L + Start + Down |
| Left analog stick mode | L + Start + Left |
| Right analog stick mode | L + Start + Right |
| Home | L + Start + Up |
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C9, C11, C12, C13, C14 |
| 8 | Button_Pad | VideoGames:BTN_Controller_Dpad_0.3_0.3 | SW0, SW1, SW2, SW3, SW4, SW5, SW8, SW9 |
| 4 | Button_Pad | VideoGames:BTN_Controller_5mm_0.3_0.3 | locked, SW6, SW10, SW11 |
| 4 | TVS_RCLAMP0524P-N | Package_DFN_QFN:UDFN-10_1.35x2.6mm_P0.5mm | U1, U2, U5, U6 |
| 3 | 10K | Resistor_SMD:R_0402_1005Metric | R4, R9, R10 |
| 3 | 10u | Capacitor_SMD:C_0402_1005Metric | C1, C2, C15 |
| 3 | 1K | Resistor_SMD:R_0402_1005Metric | R3, R5, R8 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C8, C10 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 27p | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | MountingHole | MountingHole:MountingHole_4.5mm | H1, H2 |
| 2 | MountingHole | MountingHole:MountingHole_2.1mm | H3, H4 |
| 2 | Val** | VideoGames:Reflex_Copper_30mm | Ref**, Ref** |
| 2 | Val** | VideoGames:MiSTer_Addons_MA_25mm | Ref**, Ref** |
| 1 | 74AHC1G32 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U8 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x05 | Connector_JST:JST_PH_S5B-PH-K_1x05_P2.00mm_Horizontal | J5 |
| 1 | Crystal_GND24_Small | Crystal:Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm | Y1 |
| 1 | L | MountingHole:MountingHole_1.2mm_Pad | JW4 |
| 1 | L- | MountingHole:MountingHole_1.2mm_Pad | JW2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LS | MountingHole:MountingHole_1.2mm_Pad | JW8 |
| 1 | LS- | MountingHole:MountingHole_1.2mm_Pad | JW5 |
| 1 | MountingHole | MountingHole:MountingHole_1.8mm | H5 |
| 1 | R | MountingHole:MountingHole_1.2mm_Pad | JW1 |
| 1 | R- | MountingHole:MountingHole_1.2mm_Pad | JW3 |
| 1 | RP2040 | VideoGames_KiCad6:RP2040-QFN-56 | U4 |
| 1 | RS | MountingHole:MountingHole_1.2mm_Pad | JW7 |
| 1 | RS- | MountingHole:MountingHole_1.2mm_Pad | JW6 |
| 1 | SCHOTTKY DIODE | Diode_SMD:D_0603_1608Metric | D1 |
| 1 | Val** | VideoGames_KiCad6:Idaho_XL | Ref** |
| 1 | Val** | VideoGames:Controller_SNES_OEM | Ref** |
| 1 | W25Q16 | VideoGames_KiCad6:SOIC127P790X216-8N | FLASH1 |
Questions
How big is the Snes controller pcb PCB?
It measures 126.8 × 54.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Snes controller pcb use?
67 parts, built around the RP2040, 74AHC1G32GW and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Snes controller pcb KiCad files?
From the misteraddons/Reflex-CTRL repository on GitHub, at the commit this page was made from: the board is PCBs/SNES/V1.0/snes_controller_pcb.kicad_pcb and its schematic PCBs/Genesis-6/V1.0/genesis-6_controller_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Snes controller pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask misteraddons before reusing the design.
More from misteraddons/Reflex-CTRL
4- 2 layers122 × 50 mm
Saturn controller pcb
misteraddons/Reflex-CTRL
Update Firmware: Select + Start + Up + Plug in USB | Mode | Button Combo | | --- | --- | | Nintendo Switch Mode | B + Plug in USB | | Xinput | A + Plug in USB |
51 parts19 - 2 layers113 × 43.1 mm
Nes controller pcb
misteraddons/Reflex-CTRL
Update Firmware: Select + Start + Up + Plug in USB | Mode | Button Combo | | --- | --- | | Nintendo Switch Mode | B + Plug in USB | | Xinput | A + Plug in USB |
50 parts19 - 2 layers35 × 24.7 mm
Vb controller shoulder left pcb
misteraddons/Reflex-CTRL
Update Firmware: Select + Start + Up + Plug in USB | Mode | Button Combo | | --- | --- | | Nintendo Switch Mode | B + Plug in USB | | Xinput | A + Plug in USB |
4 parts19
Similar boards
- 4 layers40 × 19 mm
- 2 layers
Diffuino selector
elixpo/elixpo_chapter
Elixpo’s canonical collection for public build-and-release Chapters, bringing open-source software, reproducible research, hardware, and community contributions into one attributable record.
46 parts85 - 2 layers31.4 × 20.6 mm
Window sensor V5
gadjet/Window-Door-sensor-Version-5
Version 5 of the Window/Door sensor project this time with ultra low current consumption
32 parts70GPL-2.0 - 2 layers30 × 30.5 mm
SDGeckoLED
silverstee1/SDGecko-2.0
MicroSD Card Adapter For GameCube's Front Memcard Slots v2.0
8 parts17Unlicense - 2 layers36.5 × 46.3 mm
Gamecube SD2SP2PRO
silverstee1/SD2SP2-Pro
Micro SD Card Adapter v1 and v2.0 for Gamecube's Serial Port 2
4 parts16MIT - 2 layers81.7 × 372 mm
- 2 layers47 × 28 mm
- 2 layers32.2 × 42 mm
