Skip to the content
2 layers83.5 × 84 mmPlaca de intregracion, the printed circuit board in 3D

Placa de intregracion

MisionSAE/Mision-SAE-2015

En este repositorio se presenta y deja a disposición de los interesados material generado en la edición 2015 del Proyecto Misión SAE.

Size
83.5 × 84 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
14
Pads
141
Tracks, vias
100, 0
Pours
2
Routed
Yes
KiCad
KiCad 3
Created
26 Feb 2016
Updated
29 Feb 2016

Overview

Placa de intregracion is an open-source printed circuit board by MisionSAE, from the MisionSAE/Mision-SAE-2015 repository on GitHub. It is a 2-layer board of 83.5 × 84 mm with 13 parts on 14 nets, routed with 100 tracks and 0 vias.

It is built around the BMP085. Its parts include 8 connectors, 3 ICs and 1 switch.

Main components

1

README

README.md

Mision-SAE-2015

En este repositorio se presenta y deja a disposición de los interesados material generado en la edición 2015 del Proyecto Misión SAE. En el mismo se podrá encontrar el firmware y hardware desarrollados para el vuelo del prototipo del dispositivo SAE, así como plantillas y ejemplos de trabajo para la programación de los dispositivos.

Estructura del repositorio

  • Prototipo SAE: Código fuente y diseño de hardware utilizados en la construcción del prototipo del dispositivo SAE.

    • Firmware: Código fuente del firmware del prototipo SAE y ejemplos de desarrollo.

      • PrototipoSAE: Firmware utilizado en los lanzamientos de validación del prototipo SAE

        • PropositoGeneral: Firmware de propósito general del prototipo SAE, conformado por la versión 0.6.1 del firmware del Proyecto CIAA (https://github.com/ciaa/Firmware)

        • PropositoEspecifico: Código fuente de las aplicaciones necesarias para llevar adelante la misión primaría de la Misión SAE. Contiene biblioteca para el uso del transmisor XBee, la memoria externa y los sensores de presión, aceleración y temperatura.

      • MaterialdeTrabajo: Plantilla y ejemplos de desarrollo brindados a los participantes de la edición 2015 del proyecto Misión SAE.

    • Hardware: Bibliotecas, esquemáticos y PCB para el diseño de la placa de integración o poncho que se utilizó como interfaz entre la placa EDU-CIAA y los componentes del Kit SAE. Para su diseño se utilizó la versión (2013-07-07 BZR 4022)-stable de KiCad.

Parts

13
QtyValueFootprintReferences
2CONN_11pinP7, P8
124C512DIP-8__300U2
17805TO220_VERTU1
1BMP085PIN_ARRAY-6X1P5
1DIPS_04DIPS-DS04SW1
1JUMPERPIN_ARRAY_2X1JP1
1MPU6050pin_array_8x1P4
1P1PIN_ARRAY_20X2P1
1P2PIN_ARRAY_20X2P2
1VinPIN_ARRAY_2X1P6
1VoutPIN_ARRAY_2X1P3
1XBEEXBee-proU3

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the Placa de intregracion PCB?

It measures 83.5 × 84 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Placa de intregracion use?

13 parts, built around the BMP085. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Placa de intregracion KiCad files?

From the MisionSAE/Mision-SAE-2015 repository on GitHub, at the commit this page was made from: the board is Hardware SAE/Placa de integracion/Placa de intregracion.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Placa de intregracion design in my own project?

Its repository states no licence, so its author keeps all rights: ask MisionSAE before reusing the design.