Skip to the content
2 layers189 × 36 mmAddOnB, the printed circuit board in 3D
Size
189 × 36 mm
Copper layers
2
Thickness
1.6 mm
Parts
81
Nets
49
Pads
210
Tracks, vias
343, 31
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
7 Oct 2018
Updated
3 Jul 2021

Overview

AddOnB is an open-source printed circuit board by mischuja, from the mischuja/SigmaDSP repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 189 × 36 mm with 81 parts on 49 nets, routed with 343 tracks and 31 vias.

Its parts include 56 resistors, 16 capacitors and 9 crystals.

Parts

81
QtyValueFootprintReferences
16CAP_100p_50V_C0G_NP0_0805rklib:C0805-X7RC101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112, C113, C114, C115, C116
16RES_100K_1%_0.125W_Thick_0805rklib:C0805-RESR102, R104, R106, R108, R110, R112, R114, R116, R118, R120, R122, R124, R126, R128, R130, R132
16RES_100R_1%_0.25W_Thin_0805rklib:C0805-RESR101, R103, R105, R107, R109, R111, R113, R115, R117, R119, R121, R123, R125, R127, R129, R131
16RES_7K87_0.5%_0.100W_Thin_0805rklib:C0805-RESR133, R135, R136, R138, R139, R141, R142, R144, R145, R147, R148, R150, R151, R153, R154, R156
8RES_5K11_0.5%_0.100W_Thin_0805rklib:C0805-RESR134, R137, R140, R143, R146, R149, R152, R155
8XLR3rklib:NC3FAHX101, X102, X103, X104, X105, X106, X107, X108
1CON_IDC26rklib:IDC26X109

Similar boards

  • 2 layers162.9 × 178.9 mmAMPCD, the printed circuit board in 3D

    AMPCD

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    81 parts431
  • 2 layers177.2 × 114.3 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-1-2

    Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed

    81 parts184
  • 2 layersEdrumulus, the printed circuit board in 3D

    Edrumulus

    corrados/edrumulus

    Open Source E-Drum Trigger Module

    81 parts163GPL-2.0
  • 2 layers64 × 55 mmZynthiandac bk2, the printed circuit board in 3D

    Zynthiandac bk2

    zynthian/zynthian-hw

    Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

    81 parts156
  • 2 layersBD0027, the printed circuit board in 3D

    BD0027

    schlae/VapeRE

    Reverse engineered disposable v a p e boards

    81 parts136
  • 2 layers41.9 × 62.8 mmColumn, the printed circuit board in 3D

    Column

    AlaaSaadAbdo/Rommana

    A 30 key well powered by Xiao BLE

    81 parts105
  • 2 layers38.6 × 38.6 mmIotLedDriver, the printed circuit board in 3D

    IotLedDriver

    BerkeleyHCI/PolymorphicBlocks

    A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.

    81 parts94BSD-3-Clause
  • 2 layers98.5 × 45.4 mmIdawgz32, the printed circuit board in 3D

    Idawgz32

    ChrisChrisLoLo/idawgz32

    A full 32 key mechanical keyboard that can be made for only $5

    81 parts77GPL-3.0

Questions

How big is the AddOnB PCB?

It measures 189 × 36 mm and has 2 copper layers, 1.6 mm thick.

What parts does the AddOnB use?

81 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AddOnB KiCad files?

From the mischuja/SigmaDSP repository on GitHub, at the commit this page was made from: the board is freeDSP/freeDSP-aurora/ADDONS/AddOnB/KICAD/Board B/AddOnB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the AddOnB design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).