2 layers
2 layers
Drive4
mirmik/pcbdrive4 - Ардуино-программируемый 4-х канальный драйвер двигателей.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 9
- Pads
- 50
- Tracks, vias
- 13, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Feb 2017
- Updated
- 8 May 2018
Overview
Drive4 is an open-source printed circuit board by mirmik, from the mirmik/pcb repository on GitHub. It is a 2-layer board with 7 parts on 9 nets, routed with 13 tracks and 0 vias.
It is built around the ATMEGA328-AU. Its parts include 3 capacitors, 1 resistor, 1 IC, 1 connector and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdФайлы проектов печатных плат
drive4 - Ардуино-программируемый 4-х канальный драйвер двигателей.
From Mirmik
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | C | Capacitors_SMD:C_0402 | C1, C2, C3 |
| 1 | ATMEGA328-AU | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | Crystal_GND2 | Crystals:Crystal_SMD_FOX_FQ7050-4pin_7.0x5.0mm | Y1 |
| 1 | FTDI Port | Pin_Headers:Pin_Header_Angled_1x06_Pitch1.00mm | J1 |
| 1 | R | Resistors_SMD:R_0402 | R1 |
Questions
What parts does the Drive4 use?
7 parts, built around the ATMEGA328-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Drive4 KiCad files?
From the mirmik/pcb repository on GitHub, at the commit this page was made from: the board is drive4/drive4.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Drive4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask mirmik before reusing the design.
More from mirmik/pcb
1Similar boards
- 2 layers82 × 120 mm
Sample Numeric Keyboard
famichu/MagLev_Switch_MX
The 3D printable magnetic levitation contactless switch with the linear output hall effect sensor.
66 parts467 - 2 layers76.2 × 76.2 mm
PaperBack Converter
dqydj/PaperBack_EPaper_Display
Internet Connected or Standard Input EPaper Display
92 parts83MIT - 2 layers18 × 33.2 mm
Arduino pro mini
etimou/arduino-pro-mini-kicad
This is a clone of the well known arduino board "pro-mini" designed in kicad while the original was designed in eagle. Ref https://store.arduino.cc/arduino-pro-mini
23 parts69 - 2 layers101.6 × 147.3 mm
Karabas pro revER
andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
223 parts37MIT - 4 layers100 × 100 mm
- 2 layers100 × 100 mm
- 2 layers100 × 70 mm
- 2 layers52.6 × 45.6 mm
