Skip to the content
2 layers61.5 × 34 mmWeather, the printed circuit board in 3D

A simple weather station based on ESP8266 and BME280. Exports data to MQTT / HomeAssistant

Size
61.5 × 34 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
19
Pads
38
Tracks, vias
62, 1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
8 Jun 2024
Updated
9 Aug 2026

Overview

Weather is an open-source printed circuit board by mirkosertic, from the mirkosertic/ESP8266Weatherstation repository on GitHub, published under the MIT licence. It is a 2-layer board of 61.5 × 34 mm with 7 parts on 19 nets, routed with 62 tracks and 1 via.

It belongs with the home automation and IoT boards and the ESP8266 boards of this library.

README

README.md

ESP8266 Climate Sensor

PlatformIO CI

This project provides an ESP8266 based climate sensor with the following features:

  • MQTT status reporting / remote control
  • Home Assistant integration with device autodiscovery
  • Multi-Sensor display indoor/outdoor with Weather forecast
  • Battery powered with deep sleep support

Supported hardware

  • ESP8266 Lolin D1 Mini with Deep-Sleep
  • BME280 climate sensor (i2c-Mode)
  • 200x200 WeAct EPD/eInk display (4-Wire SPI)

Display & HA integration

Weather data is presented the following way using the eInk-Display:

display

The following sensors are automatically discovered by the HA MQTT auto discovery:

haintegration

The device collects the following data points:

  • Absolute humidity (calculated)
  • Relative humidity
  • Current battery voltage
  • Air pressure
  • Temperature
  • Overall cycle time of the sensor for one measurement
  • Wifi quality

Schematics & Prototype

The KiCad 8.0 project is located in the kicad folder.

Here is the wiring schematic drawing:

schematics

prototype

Manual

TBD

Parts

7
QtyValueFootprintReferences
2200Kcustom_footprints:4er DIPR1, R2
13.7VConnector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical- +
1Deep sleep / Programmimgcustom_footprints:2er DIPJP1
1~custom_footprints:1,54 EPD SPI DIPWeAct154EPD1
1~custom_footprints:BME280 DIPBME280
1~custom_footprints:LOLIN D1 MINI DIPESP8266

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the Weather PCB?

It measures 61.5 × 34 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Weather use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Weather KiCad files?

From the mirkosertic/ESP8266Weatherstation repository on GitHub, at the commit this page was made from: the board is kicad/weather/weather.kicad_pcb and its schematic kicad/weather/weather.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Weather design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).