4 layers130 × 105 mm
Vm101-inout
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
238 parts21
4 layers49 × 59 mm
Vm001-input
mirdej/vmix21Multichannel modular analog PAL video mixer based on the SYNKIE project
- Size
- 49 × 59 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 48
- Pads
- 225
- Tracks, vias
- 629, 63
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Aug 2020
- Updated
- 5 Dec 2024
Overview
Vm001-input is an open-source printed circuit board by mirdej, from the mirdej/vmix repository on GitHub. It is a 4-layer board of 49 × 59 mm with 78 parts on 48 nets, routed with 629 tracks and 63 vias.
It is built around the LMH6643MM, BAT54S and BAT54, with the PEMX1 and PMBT3906YS among its other parts. Its parts include 29 resistors, 19 capacitors, 8 connectors, 6 ICs and 4 diodes.
Main components
5
LMH6643MM
VSSOP-8-40℃~+85℃ 1.5uA 130MHz 130V/us 145mA 17nV/√Hz@100kHz 2 2.7V~12.8V 2.7mA 20nA 3.4mV 5uV/℃ 95dB Rail-to-rail output VSSOP-8 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
BAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky DiodesBAT54
SOT-23200mA 2uA@25V 30V 800mV@100mA Independent SOT-23 Schottky Diodes ROHSFOSANSchottky Diodes
PEMX1
SOT-666-6100MHz 100mA 100nA 120 200mV 300mW 40V NPN SOT-666-6 Bipolar (BJT) ROHSNexperiaBipolar (BJT)
PMBT3906YS
TSSOP-6(SOT-363)-55℃~+150℃ 100 165mV 2 PNP 200mA 250MHz 350mW 40V 50nA 6V PNP TSSOP-6(SOT-363) Bipolar (BJT) ROHSNexperiaBipolar (BJT)
README
README.mdANYMIX 21
Multichannel modular analog PAL video mixer based on the SYNKIE project
The Anymix21 is a 12 channel analog video mixer based on the paradigm of classic audio mixing desks.
Each channel is a complete SYNKIE by itself, sort of. It can handle anything from DC to around 10Mhz, this means you can mix CV signals with audio with PAL composite video signals. Contrary to an audio mixer, inputs are DC coupled, with 0v being black and 0.7V white level. Negative levels are permitted but will be clipped at the final output stage.
Each channel has a built-in equaliser, switchable edges (bandpass), comparator and inverter effects, and a scale-bias module for adjusting brightness and contrast. The signal can then be routed to 3 main output mix busses and an auxiliary output.
Apart from the equalizer, the effects and mix levels are digitally controlled analog, so parameters can be recorded, automated, or controlled externally through MIDI. The desk can be synchronized to a MIDI clock (which is then quantized to the vertical blanking interval derived from the genlock input).
Still under construction, the first 6 channels have passed their endurance test running daily for weeks at the exhibiton “H.o.Me. – Heim für obsolete Medien” at Kunsthaus Langenthal.
Documentation
- Architecture Overview
- Mixer Channel: Flowchart and description
- Master Section: Flowchart and description
Links
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | synkie_footprints:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C4, C6, C7, C8, C9, C13, C14, C15, C16, C17, C18, C19 |
| 9 | 75 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R5, R7, R11, R15, R19, R27, R30 |
| 6 | 220 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6, R8, R14, R16, R23, R24 |
| 4 | 3k | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R21, R28, R29, R31 |
| 4 | LMH6643 | synkie_footprints:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3, U4 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_ISO7380_Pad | H1, H2, H3 |
| 3 | TestPoint | synkie_footprints:Solderpad_1mm | TP1, TP2, TP3 |
| 2 | 10p | synkie_footprints:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C11 |
| 2 | 10u | synkie_footprints:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C1, C2 |
| 2 | 120 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9, R20 |
| 2 | 330u | synkie_footprints:L_1206_3216Metric_Pad1.42x1.75mm_HandSolder | FB1, FB2 |
| 2 | 4053 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5, U6 |
| 2 | 47k | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R13, R32 |
| 2 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D2, D4 |
| 1 | (75) | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R22 |
| 1 | 120p | synkie_footprints:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C20 |
| 1 | 300 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R25 |
| 1 | 330 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10 |
| 1 | 4k7 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R26 |
| 1 | 560 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R17 |
| 1 | 5k6 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R12 |
| 1 | 68p | synkie_footprints:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C12 |
| 1 | BAT54 | Diode_SMD:D_SOT-23_ANK | D5 |
| 1 | COMPOSITE-INPUT | synkie_footprints:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x10 | synkie_footprints:IDC-Header_2x05_P2.54mm_Vertical | J6 |
| 1 | D | Diode_SMD:D_MiniMELF | D3 |
| 1 | INPUT_CLAMPED | synkie_footprints:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J5 |
| 1 | PEMX1 | synkie_footprints:SOT-666 | Q2 |
| 1 | PMBT3906YS | synkie_footprints:SOT-363_SC-70-6_Handsoldering | Q1 |
| 1 | Power | synkie_footprints:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J3 |
| 1 | R_POT_Dual | synkie_footprints:RK12L123 | RV1 |
| 1 | SIFF-INPUT | synkie_footprints:Solderpad_1mm | J8 |
| 1 | SIFF_IN | synkie_footprints:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J1 |
| 1 | Switch | synkie_footprints:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | VIDEO_OUT | synkie_footprints:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J7 |
| 1 | logo_anyma | anyma_footprints:logo_anyma | G*** |
Questions
How big is the Vm001-input PCB?
It measures 49 × 59 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Vm001-input use?
78 parts, built around the LMH6643MM, BAT54S, BAT54 and PEMX1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vm001-input KiCad files?
From the mirdej/vmix repository on GitHub, at the commit this page was made from: the board is old/vm001-input/vm001-input.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vm001-input design in my own project?
Its repository states no licence, so its author keeps all rights: ask mirdej before reusing the design.
More from mirdej/vmix
12- 4 layers61.8 × 100 mm
Vm013-analog section
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
205 parts21 - 4 layers99 × 41.4 mm
Vm005-mix
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
144 parts21 - 4 layers58 × 71 mm
Vm113-effects
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
132 parts21 - 4 layers60.3 × 48 mm
Vm003-eq
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
114 parts21 - 2 layers59 × 154 mm
Vm124-masterpanel
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
105 parts21 - 4 layers53.1 × 113.2 mm
Vm129-cpu
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
98 parts21 - 2 layers25 × 94 mm
Vm120-output
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
82 parts21 - 4 layers44 × 93 mm
Vm020-output
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
80 parts21 - 2 layers97.8 × 72.6 mm
Vm009-cpu
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
75 parts21 - 2 layers56 × 160 mm
Vm122-masterfader
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
74 parts21 - 2 layers25 × 99.5 mm
Vm128-preview mux
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
74 parts21
Similar boards
- 4 layers45.8 × 69.5 mm
Microsynkie
mirdej/synkie
The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann
84 parts47 - 4 layers33 × 15.2 mm
- 2 layers17.5 × 15 mm
LM1117-LDO TILE
pris-digital/ManhattanBreakoutBoards-Panelized
A collection of breakout boards for manhattan style prototyping
9 partsGPL-3.0 - 2 layers70.7 × 53.3 mm
- 2 layers130 × 90 mm
- 2 layers100 × 62.1 mm
- 4 layers70.7 × 53.3 mm
- 4 layers
IONPAK2
m-labs/ionpak
A modern, low-cost universal controller for hot-cathode ionization vacuum gauges. (WIP)
259 parts23